How to install a flush bolt on a door
Vložit
- čas přidán 28. 09. 2023
- How to install a flush bolt in a door is commonly used in double doors. The flush bolt installation is at the top and/or bottom of the door and this shows how to properly install a flush bolt in a door.
Learn how to install doors and repair doors and you can make money with door installation and door repair skills. How to install a door and how to install door locks are skills that will make money and get you paid.
More information and recommended watchlist at www.askillthatp...
This is the best channel to learn how to install and repair doors because I show you all the steps of door installation and show videos of multiple types of door installation and door repairs.
You can make money installing doors and repairing doors and I show you how. When it comes to learning how to install doors and how to repair doors, there is nothing quite like my clear step by step process for door installation and door repair. My videos show you how to use all the tools like routers, power planers, drills, drivers, circular saws and more. Once you learn these techniques, you will have a skill that pays, and you could make a living as a door installer. - Jak na to + styl
Great video! Straight forward, no fluff and exactly what I was looking for. Thank you for taking the time to teach us!
I'm glad you enjoyed it. Thanks for watching
Thanks for the how to. Very complete. I just purchased a couple, no instructions. Now I know how to do the project.
I'm glad you found it useful. thanks for watching. I appreciate the feedback
Awesomeness
Excellent video, thank you !!
You're welcome. Thanks for watching
Amazing! Good advice! I would have used the router full depth and blown out the door, cussing and all! Lol Thank you!
Been there ! And sometimes I still get a little impatient and go deeper than I should. Glad I could pass on that tip. Thanks for watching.
My door is locked at the bottom with a full length flush lock the top moves but not the bottom
That's typically an alignment issue or a broken mechanism. For the first case, try to get some WD40 into any accessible mechanism area both in the sliding part and under the door. Pull or push the door as you try to move the mechanism. IF the mechanism is broken, unscrew it from the door and try to move it manually by pulling on the rod or moving the bolt from the bottom with a putty knife or something like that. If that doesn't work, try popping the hinge pins off and moving the door until you can get it off and do an inspection. Good luck and thanks for watching.