How to Make Your Bicycle Faster. Bike Rear Hub Maintenance | Shimano FH-RM30
Vložit
- čas přidán 15. 05. 2024
- Hello cyclists!
In this video, we will show you how to Make Your Bicycle Faster.
I will teach you Bike Rear Hub Maintenance.
For example, we will use a bicycle hub Shimano FH-RM30.
This video lesson (DIY) for cyclists. Video tutorial in style "ASMR"
This video speaks through mechanics, void of verbal content. Universally understandable; designed as a DIY tutorial.
Detailed episodes in this video tutorial:
00:00 How to make your bike faster.
01:01 Removing the eccentric and cassette from a bicycle wheel.
01:12 Bike rear hub shimano fh-rm30.
01:22 Cleaning a bicycle hub.
01:33 How to turn a hub.
02:33 Cone wheel bearing on your bicycle rear wheel hub.
03:45 Cleaning the rear wheel hub.
05:27 Bike rear hub maintenance.
05:45 How to grease a bicycle hub.
07:34 How to adjust cone bearings on a bicycle hub.
09:26 Installing the cassette on the freewheel.
09:55 Good job!
#maintenance #bicycle #tutorial
🆗🎥🚲
Write in the comments, what you would like me to do in the new video.
❓❔❓
Ask your questions in the comments
👇👇👇 - Věda a technologie
❤ If you liked this video,
🙏 share this video with your friends
📈 it will help the development of the channel!
❓ ask your questions
I’d rather have someone who doesn’t talk and show me every step of the job, then someone who talks about every step of the job, but only shows me one part of it.
Great video for a aspiring Bikefarmer
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
@@NiceBikeService Will do !
😻
Ótimo trabalho, parabéns!!
Good basic service, but you have a way to go. When adjusting the cone tension, put the cassette side locknut in a vice to hold the axle still.
Brawo za warsztat i smar w strzykawce!
Verdiğiniz bu güzel detaylı bilgiler için teşekkür ederim.
Very professional work experience ❤
Perfect !!! 🎉
bardzo fajny film. wszystko prosto i dobrze pokazane, bez komentarza i zbędnej muzyki. super!
Sem música ficamos melhor no assunto. Gostei também.
Чудова робота, дякую за підказку з мастилом. Дівінол справді хороше мастило, 👍
чем оно хорошее ? раскрученое фуфло которое вытекает в жару и не работает даже в нулевую температуру
Excellent greetings from Cali Colombia South America
Very good video, I liked and subscribed.
When I service hub I usually replace all the balls and cones if needed (if they have pits or races). And yes they are pain in the ass to set up correctly bearing to rotate peoperly.
Estaria bueno un video mostrando el taller. Muy buen video
what are you using to clean with and what is the lube?
Que tipo de grasa lubricante utilizaste para los rodamientos?
Cảm ơn bạn chia sẻ rất hay
Trabajas Muy bien y muy limpió te felicito
Yo hace años me encontré los rodamientos como huevos,por eso es muy importante esos mantenimientos
This makes it really easy, thanks bro
glad to be of service! thanks for your feedback 😘
Hi
What kind of bike lube used here ?
Useful info but the tyres look good where to get them are 26" available nowadays?
Very Good video. I subscribe!
Although I do not like bearings and cones, you did something I never thought of. That is backing off the cone to the lock nut to compensate for the over tightening of the lock nut.
that's a must to ensure it rolls free
Thank you for your comment. It also allows you to adjust the wheel tightness in the future without disassembling the entire wheel
Great job Rj 🚴🚴♂️🚴♀️👌
Vou trocar as esferas metalicas.. por ceramicas!!! What u think change steel bearing, than ceramic balls?
What is the spray and the green lube
I follow your videos it work. My bike is faster .nice
Good job
thank you
Boa noite. Vc sabe qual cartucho de retorno serve na suspensão suntour xcm rl ds 29, coil spring 100mm da sl329?
Just got done looking after my *own* rear hub….
Shimano uses a lighter grade of grease (compared to, say, Mobil-1 grease) and they tend to put a modest amount in.
Used Mobil-28 aircraft grease, because it was in the Dualco grease gun, and I had it for lubing the BBS-HD motor…
Bike seems to roll noticeably freer compared to before servicing.
If you do it like skate bearings, use only one drup off oil, nothing more. Qnd you have a much smoother ride
I have a similar hub I just serviced recently (Deore M525A), the bearings and race is smooth as glass even after putting thousands of km in it. These hubs are not the best, but they are reliable. 🐐
Yes, they are very high quality👍
사용한 그리스가 어디제품인지 궁금합니다.
very very interesting. A curiosity of mine: why didn't you do the maintenance of internal bearings of the freehub budy?
Thank you for your feedback. There is a separate video on our channel with freehub service.
Podziwiam Pana pasję, zaangażowanie i miłość do rowerów:) z przyjemnością oglądam filmy pomimo, że sam nie jeżdżę na rowerze (ale umiem ;)) wszystko jest wytłumaczone i pokazane tak, że każdy jest w stanie zrozumieć. Mam pytanie na które nie znalazłem odpowiedzi w necie.. Jakiś czas temu serwisowałem swój stary rower szosowy Peugeot. Miałem problem w doborze ilości śrutów. Włożyłem z powrotem tyle ile wyciągnąłem i okazało się, że jest jeszcze miejsce. Dołożyłem taki sam rozmiar i albo było o 1 za dużo albo zostawało miejsce i nie zmieścił się już żaden śrut.. Czy to ma jakiś wpływ na płynność pracy piast? Czy można zostawić troche wolnego miejsca czy zmienić rozmiar śrutów na większy tak aby wypełnić lukę? Po złożeniu miałem wrażenie że koła nie kręcą się płynnie.. Pozdrawiam
I wish I could understand Polish.
O.P. needs some Pivo, perhaps? A sip or three?
Всегда должно быть место под один свободный шарик. До отказа забивать шариками нельзя.
Jaka przyczyna może być zblokowanej kasety ?
Gutes Video !
Ich habe mir vor paar Monaten ein neues HR gekauft. Nase voll von losen Kugeln, Fett und vielen Bauteilen. DT SWISS 350 Hybride.
Wir sollten mehr europäische Produkte an unseren Bike's bevorzugen.
Thanks you. Very good.
Salut, am o problema la o roata asemănătoare(caseta) după centrare rotii pinioanele au început sa joace, mecanicul mi-a spus ca trebuie schimbata caseta sau angrenajul, ce poate fi?
Smaru typu lt 43 można użyć ?
I used to service my hubs like shown. But then an engineer pointed out that the hardness of the balls is greater than the hardness of the hub. So the surfaces of the hub will wear away before the balls do. Making ball replacement pointless. But it's still worth cleaning and greasing.
Hardness has little to do with pitting from rust. The cup and cone degrade sure. Its incredible how well a newly greased hub rides with new rust free ballls
@@MrJob91 That's what she said!
I've been doing this for years. Not even had a slightest issue with hubs wearing out. Just make sure you use . Ntn balls. Chinese balls will fuck up the hub
@@colecoleman1499 Ask a METALLURGIST .
@@colecoleman1499 I use SKF or NITTO , but from Japanese made batches.
What grease is that?
Sehr gutes Video 👍👍👍👍
❤️😺
Do piasty wrzucasz nowe kulki czy to są oczyszczone stare, a cała operacja polega tylko na wyczyszczeniu, przesmarowaniu i wyregulowaniu piasty?
Perawatan Hub Belakang Sepeda, makasih om tip/ cara nya
terima kasih atas komentar Anda! 😘
Nice sharing
Brabo, só me falta coragem de desmontar minha bike novinha kkkkk
Attn Nice bicycle service , what can you then do if the bicycle is functioning well but a very fussy owner of that bicycle is still not satisfied ? Seals ALWAYS ADD DRAG AND FRICTION . EVEN WITH QUARQ AND CERAMICSPEED PRODUCTS , I CAN STILL FEEL ROUGHNESS ALTHOUGH VERY SUBTLE . SOME DT HUBS ARE LOUD YET THEY HAVE A FAIR AMOUNT OF DRAG DUE TO PAWL SHAPE AND RETAINING SPRING TORSION . SOME PROS STILL USE THEM WITH THIS DRAWBACK BUT WHY ?
can we use any lube , ?
Jaja..... que Buena, buena técnica para colocar los balines...🙂
gracias por tu comentario 😘
How to made your grease oil needle?
the right tyres will make your bike faster
😸
Que graxa é essa e que seringa é essa?
are you from korea where is your Shop located thanks?
As an owner of a small wheeled, heavy rolling Brompton I need all the help I can get! I hope to be able to replace mine with ceramic ball sets, as finished units, as in my head set!
I wish you good luck with your service!!!
Hey man! What brand on the green grease are you useing?
It’s Shimano premium Grease. I use that too
The most important point for all comments contributors here to remember is that the quality of the hub itself , less bearings is the primary limiting factor to energy efficiency gains . Also , grease chemistry and viscosity characteristics . The title of this video is only partly correct when it comes to practice and outcomes .
what's the best grease, i usually throw Walmarts high temp lucas grease on mine ..
@@user-vk1bg1en1qbuy park tool ppl 1 multi purpose, or Shimano high performance grease also multipurpose
Where can I get all tools for reparing ...help
Nice video..thx I like the no talk...
Thank you for your comment! 😍
If you liked my videos ❤️,
support the channel financially 💰🙏.
Use the "Membership" / "Sponsor" function on CZcams ✊😘
I loved the video. If you let me ask a peculiar question. Is that possible to use this kind green grease for do maintenance on MTB shocks? At least lub the piston stroke? Another question, What do you use for spray cleaning the dirt from the rims? Thnx
Thank you for your comment. If you have a budget fork like RST or SUNTOUR, you can use such a lubricant, if you have something higher level like FOX or RockShox, then it is better to use the original lubricants recommended by the manufacturer. We use isopropanol in the sprayer
Hey man, I would like to ask.. Why my rear QR Axle always bent everytime I use my bike, I already installed it really good and precise, what is ur opinion about this?
@@NiceBikeService well, my weight is about 73kg, and height 178cm I think I must have new bike, 27,5 or 29er ya?
Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre
@@itsmondaytho how are we supposed to know if you prefer 27.5 or 29 or maybe even 26?
You have to span the wheel in with more force to prevent that. Think about the force distributtion.
De tantos testes que tenho feito, fiz um furo três milímetros no corpo do free hub por onde coloco periodicamente graxa azul misturado com óleo jerod bem macia pra não travar os clics que tambem serve pros rolamentos dos cubos de rodas.
Why do you use peg board for your bench?
다른 언어권의 시청자들이 많이 들어오는거 보니, 흔한 영상은 아니네요..ㅋ 많은 도움이 되었습니다. 비록 실력이 일천해서 시도해볼 엄두는 안나지만...ㅋ
친절한 피드백에 감사드립니다.
Se ve muy bien tu trabajo y así se deve hacer, pero muchas veces los mecánicos no lo hacen bien... Al menos que yo presencié su trabajo para que sea como yo lo deseo.
Tambien tiene que ver con que mecánico lo lleves, siempre es recomendable que lleves tu bicicleta con un tecnico profesional sale mas caro el servicio pero es calidad de trabajo.
Is oiling required for loose bearing? if yes after how many klm
As our experience has shown, if the wheel spins well and there is no play, there is no need to open the hub and do anything else. The grease does not need to be changed for prevention.
Bom trabalho! Like.
很好玩 我要先准备一套工具
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
what kind of green grease is that? brand and type?
maybe....it is shimano premium grease,it can be used for various porposes.
in my case,I use it for head parts.
For lube, we use thick calcium grease Divinol
Яке мастило ви використовуєте ? 😮
Hi, what type of Grease & steelballs you have used?
We use Divinol calcium grease and 6mm Shimano balls
Si se ha roto la parte donde sujeta los balines de parte de la llanta, o sea que se desoldo, tendre que reponer toda la llanta? O solo el tubo ese? Es que si esta roto por dentro
@@NiceBikeService como te envío una foto o video?
다른 유투버 허브 유격 조정 영상을 많이 보고 자신있었는데 오늘 뜯어서 다시 조립 하는 과정에서 스프라켓 쪽에서만 유격을 조정 하려니 막막했는데 님의 영상에서 반대쪽에서 유격조정 하는거 보고 눈이 번쩍 뜨이고 체증이 뚫리는 기분이였습니다.
비록 2012년에 나온 30주년 풀샥 젯스트림 P8이지만 상태가 A급이라 믿고 샀는데 구름성이 별로라 뜯어봤는데 그리스 아직 남아 있지만 손으로만 조이고 재조립해도 조임정도에 따라 구름성이 차이 날만큼 정도가 심하네요.
주문한 그리스 도착하면 깨끗이 청소하고 베어링 편마모나 파손, 베어링이 구르는 시트(?) 부분에 상처는 없는지 살펴보고 최선을 다해 재조립 해야겠습니다.
다른 유투버는 바퀴를 좌우로 흔들어봐서 유격없게 하라는데 약간의 유격을 두라는 것도 차별성이 있네요.
좋은 영상 잘봤습니다. 자주 들르겠습니다. 감사합니다.
친절한 피드백과 흥미로운 이야기를 보내주셔서 감사합니다. 자전거 수리에 성공하고 좋은 라이딩을 즐기시길 바랍니다!😽
Top! Dankjewel. Enig idee of die super handige magneet nog ergens te krijgen is? 😊
@@NiceBikeService yep, vooral voor lagers.
Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre
According to what a mechanic told me the gentleman in the vidio used entirely too much grease. Grease adds friction. Only a thin film of grease is necessasary in the packing of bicycle bearings. You only use enough to coat the working surface of the bearings. Anything else is waste of grease. If you crud the race up with grease just to keep the bearings from falling out your adding friction and wasting product. I persinally dont see any improvement in speed of his bicycle wheel. Just a whisp of grease is all that is needed. Anything else only attracts dust and dirt.hope this helps. If you can always use new balls as they become egg shaped with normal use. A driill bit gauge can sort larger bearings and give a guide as too which bearings are worn as they will pop right through if unusually worn. I also noticed he used no solvent on the bearings. You must clean the bearings and dry them in a correct repack. Break cleaning fluid does a nice job of removing crud from bearings. Remember that it is a carcinogen and wear gloves and use out doors. Happy trails!
Thank you for such an extensive and useful comment. I will take it into consideration. Happy riding and repairing!
Im a fan of red high temp greese.🍻
🚀
I like the motorex
also good !
Kiedyś się bawiłem tak jak tuż tymi pseudo piastami,od dobrych kilku lat jeżdżę tyłka na piastach z łożyskami maszynowymi,są praktycznie wieczne a jak chcesz powiecmy rozebrać tylna piastę to można to zrobić jedna reką,polecam piasty novateca bez żadnego serwisu zrobiłem na takiej piaście 30 tys km a jak ja rozebrałem to wyglądała jak nowa,kulki na złom:)
ciekawy komentarz 👍
Tylko część piast na maszynach jest rozbieralna bez narzędzi.
Te piasty, ogólnie, nie są wieczne. Piasty eksploatowane cały rok, w każdych warunkach, zwyczaj żywotność łożysk to kilka tysięcy km. Serwisowałem tysiące tych piast. Te które jeżdżą bez syfu - mogą mieć dłuższe przebiegi bez serwisu.
Дуже цікаві відео. Підкажіть, що за мастило зеленого кольору для кульок в підшипнику?
@@NiceBikeService This lube is hardly suitable for wheel bearings because of it's very high viscosity of the base oil.
@@NiceBikeService дякую
Divinol Fett Top of 2003 Is this what you use to lubricate bearings?
yeas)
Excelente video, felicidades.
Que grasa es la que usas?
Gracias por sus comentarios. Como lubricante, utilizamos grasa gruesa de calcio Divinol
Yo a a mia le puse unas rolineras reforzadas con soportes mas o menos fijandome como los pedalier sellado que usan rolineras aunque ya venden ejes traseros con unas rolineras ya puestas así como hice mas practico porque si se te daña una de las rolineras que estan fijas en ese tipo de ejes tiene que cambiar toda la pieza en cambio con un eje compuesto adaptados solo cambiarías la rolinera que si o si dan mas rodamiento a la rueda trasera y con la rolinera queda mas fijo la rueda y como ruedan ahora pudo pedalear y recorrer mas de 300 metros sin pedalear en plano. Pero esta buena la idea también del video, pero eso no pone un poco mas pesado la rueda.
What spray are you using to clean the grease?
isopropanol in the sprayer
Sir i just wanna know how i can fix the wobbling issue in my fat bike the thing is that there’s no play in the axle i did the following steps mentioned in the video but the tire still wobbles what do you think about it. What do you think about the loosen spokes?? Tell me to fix this problem hope you find a way 🙂
Maybe try truing your wheel or tighten the quick release
I have a problem where my bike wheel missaligns when i use it. Also cleaned the rear hub and found out that its not the root of the problem. Tightening the quick release solved the problem
@@liamcolumbino2062 dude i tried but that’s not working
@@NiceBikeService okay then I’ll make a video on the issue and will send it to you??
Instagram ?
what's the name of the part removed at about minute 4:10 ? do you know where I can find it? I think mine was damaged (bent) when I tried to removed it. What is it actually good for, just protection?
Yes, for protection.
It's hard to buy one, every bike hub has a unique one.
Dobry filmik. W moim rowerze jedna kulka zmieliła się. Na miseczce w piaście zostały dość głębokie rysy. Lepiej zostawić tak jak jest czy spróbować wybić starą i wbić nową. Nie widziałem nigdzie aby ktoś to robił stąd moje obawy.
nie wiem czy tak latwo wybic to jakas prasa do tego potrzebna lepiej cala piaste kupic
Czy gdzieś można a jeszcze kupić części to tych starych rowerów tj. stożki, łożyska itp itd?
Części zamienne, takie jak te na filmie, można łatwo znaleźć w sklepach internetowych lub na chińskich targowiskach, w przypadku starszych rowerów trudniej jest coś znaleźć
What do you call the tool that you removed the pinion
@@NiceBikeService Thanks guys
Se o cubo estava assim, imagino que o freehub também deveria ter sido revisado 🤔
Pytanie do Autora filmu: jakiej cieczy używasz do odtłuszczania powierzchni? (chodzi mi o ten płyn w małym spryskiwaczu). Fajny jest ten kanał. Pozdrowienia. 👍
ciecz - izopropyl
dzięki za komentarz!
udostępnij ten film znajomym, pomoże to w rozwoju kanału! 📈😘
Takie kulki to nadają się do procy wypłoszyć wronę albo srokę, bo do jazdy szybkiej używa się łożysk ceramicznych.
)))
A kto powiedział, że potrzebujemy zbyt dużej prędkości? ))))))
@@NiceBikeService To nie przyspieszy roweru cokolwiek to znaczy, nie macie bladego pojęcia o fizyce.
C
Hướng dẫn cách tháo cối líp bạn ơi
What was it you were spraying from the little white bottle ?
@@NiceBikeService Thank you.
El título del vídeo, no corresponde con el contenido presentado. El título correcto (y no engañoso) debe ser:
'Mantenimiento del rodamiento de rueda trasera de bicicleta'
Existen en el mercado:
- Balines de cerámica.
- Grasa a base d grafito.
Ambos son una novedad; y sí permiten mejorar la velocidad d la bici.
Pensé que el vídeo iba a mostrar algo como eso...
cierto, que nada te garantiza que por hacerle el mantenimiento a la maza o buje trasero tu bici sea mas rápida.
I think the hub races would not last long with ceramic balls .
The races are much softer , as far as I know.
These hubs are engineered to wear out in a certain amount of time .
That is why they are much cheaper than high end wheels and hubs .🤔👍
フリー側のベアリングを入れるときに軸を仮挿しして玉を落とす、これは知らなかった、早速使おう。Up主に感謝
Y en bicicleta con freno de pedal???
What kind of grease to lubricate the drum?
Vaseline works in a pinch
@@NiceBikeService Link is dead... Please post a new one, thankyou!
Boppity, boppity, bop. Where is the drum?
🚴 Does anyone know what kind of oil he is using in the video?
For lube, we use thick calcium grease Divinol. But you can use another thick grease.
Використовуй втулки на закритих підшипниках і тоді відчуєш справжню швидкість.
Колись я використовував втулки на конусах і любив їх чистити, заняття схоже на медитацію.
Проте, закриті підшипники найкращі.
Q: What is the transparent green "grease". I'm getting ready to do this. I have plain (NLGI#2) "marine" grade grease handy. Also what is the cleaning spray? I have reagent grade 100% isop. alcohol with Simple Green that quickly drgreases a cassette in about a 30 minute soak. I then WD40 the cassette (as water repellent.) Then the only lube it gets is from the chain. Please advise.
Hello friend! We use Divinol thick calcium grease for lubrication, your marine oil will also work. We use isopropanol in the spray, the same as yours. The cassette does not need to be lubricated with anything, WD 40 will evaporate quickly at best, and at worst, its droplets from the spray will get on the brakes and they will start whistling and squeaking.
@@NiceBikeService The WD-40 is (was) applied and wiped BEFORE putting it back on the wheel. Degreasing with alcohol and Simple Green leaves the alloy completely unprotected, so dry it squeaks when you rub it like a washed clean food dish. I have seen pitted alloy components from water damage. If WD-40 evaporates and I also only want lubrication coming from the clean chain lube, what do you recommend for repelling water on dry components- if anything at all? Also, thanks, I do recommend "marine" grease on the seat tube or when tightening components. I first saw this when someone was pressing in a sealed wheel bearing. That grease is made to be used on wet conditions on boats, perfect for water splashed hubs and bottom brackets, etc. Sealed bearings usually get replaced from water damage almost as much as when just wearing out.
@@fmphotooffice5513 Je pense que tu t'embêtes trop, ce qui fait toute la différence est la régularité des entretiens suivant l'utilisation, peu importe la "qualité" de la graisse utilisée, il y a bien des graisses spécifiques pour tout usage mais c'est se prendre la tête pour rien, il faut s'établir un carnet d'entretien suivant sa propre utilisation en prenant en compte son environnement, si tu roules dans la terre ou proche de la mer induira forcément une maintenance plus assidue que de faire de la ville.
Le WD-40 est un bon produit pour le quotidien, ça chasse l'humidité et protège les pièces de la corrosion après une balade pluvieuse mais ça en fait pas une bonne maintenance, c'est plus une protection à court thermes.
Car ce qui crée les dommages est la poussière qui s'accumule et ça peu importe la graisse...
You have it down to a nice flow
And I think you used just the right amount of grease , my first response was , hey , use more grease , but then I remembered the title of your video.
And I think that is as good as you can get from entry to model range cassette hubs .
Great video 👍😊