Waste Gate Turbocharger.
Vložit
- čas přidán 25. 01. 2016
- To get Free Mechanical Engineering updates through ** What's App ** send message to +919744615655 (no calls plz)
Email us at: techtrixinfo@gmail.com
Our CZcams channel: / techtrixinfo
Hi Guys, this video explains about waste gate turbocharger.
A turbocharger is a turbine driven forced indication system. Which increases the efficiency of an internal combustion engine and power output by forcing extra air into the combustion chamber. So if you compare a naturally aspirated engine over a turbocharged engine, it is capable of forcing more air into the combustion chamber, there by capable of burning more fuel. The difference between turbocharger and supercharger is that, turbochargers are powered by turbines which gets its drive from the exhaust gas, while superchargers are mechanically driven by v- belt which is connected to the crank shaft. Other than turbochargers and superchargers there are twin turbo chargers, such engines have both turbochargers and superchargers.
The function of a waste gate valve in a turbocharger is to regulate the boost pressure at the turbocharger compressor outlet.
Please Like / Comment / Share to motivate our team.
Join our google plus page: plus.google.com/+Howmachineworks
Please bookmark our site techtrixinfo.com/
You can Subscribe to us for more technical videos; thanks for your support have a great day.
I don't understand why those people have downvoted you. You made a greater presentation with paint than other youtubers with 3D modeling software and real car parts. Cheers!
Thanks for the comment
Nicely explained about waste gate function.Thanks
Super helpful. Now I need to tear down my shop built turbo system. They have my waste gates running off vacuum from a splitter block from the intake. So I am thinking it’s holding the gates open wide
Beautifully explained with almost zero animation, this show that when you got right information you can explain it to anyone. The only thing i didn't understand is how does the waste gate pipe from the intake manifold operate?
I think it just opens up in case the air hits a certain level of pressure. I'm not a mechanic but I assume maybe it's just held in place with a spring or something like that.
It operates with an actuator controlled by the oil pressure.
Super explanation, I got the basic knowledge of what is the turbocharger Westgate technology mean,,
Thank you,,🤝🤝
Excellent video explanation. Thank you.
My back pressure is 15 psi after the def filter seems to be cadilatic converters clogged causing under boost code
precise explained, thank you
Awesome video, we'll explained and very informative 👍
Beautifully explained my friend
Nice explanation with nice sketch, thankyou
Thank you very much very nice and interesting.
Nice explanation
Great explanation
+Martin Theuerer
We are honored by that comment.
For more info you can email us at techtrixinfo@gmail.com or whats app at +919744615655
TechTrixInfo.com
So the waste gate valve and the swing valve control work by themselves? The Pilot in the cockpit doesn’t need to activate them?
Good one!! . Thank you
can we increased the efficiency of this Turbo chargers? by warping special clothes on exhaust system and totall heat inserted on turbine of Turbo, IT speed increased ?
how to know opening and closing pressure specification of turbo
Hello please tell me how to repair P0243 code for waste gate .
Its good make more videos on engine's other part
In plain terms, which is better: vgt or wgt in car diesel crdi
Thank you
cat 3500 series engines do not have waste gate actuator. plz tel me how the engine managing the air feeding
Harihere1 diesel motors primarily regulate air by fuel rate only. Newer cat wrote and c15 thru c18 have wastegates for epa here. Wastegates work best on petrol or gas motors because of detonation if over boosted.
Kindly improve the animation to let layman understand the principles.The diaphragm actuates the lever by pivoting the lever of the valve soit willopen.Your animation shows a lever eccentrically moving not swinging or pivoting.If you want the diapraghm pulls the valve,the fluid diagram must be at the opposite side so it will pill the link that is connected to the valve.
does anyone have a video of replacing the turbocharger waste gate on a 2016 Tucson 1.6T Or have instructions on the easiest way to do it. Thanks
I presume the wastegate valve would normally be open on the likes of a Smart Car so that the turbo only comes in for power boost?
+Oddball
Thanks for the comment.
Join us on Whatsapp @ +919744615655 (name) for more discussions.
So is this classed as a twin scroll set up? Or is this just a standard turbo?
Thank you...
Better to say to the intercooler than intake manifold
What will be symptoms or results if the wastegate valve stuck open position or not closing properly
I believe that if a wastegate valve remains open, the turbine will be slowed down, resulting in the compressor slowing down and thus not generating optimum intake pressure for the engine. The result would be low engine performance (slow acceleration, barely hitting 2.5K rpm).
Excellent
What happens when the swing valve control is damaged
You can overboost, giving your car more air than needed and required. And depending on your engine can damage it if it is not built for high amounts of boost, (psi)
Isn't it high pressure might damage the fins of turbine and that's why we have waste gate?
+Prabhu N
High pressure can cause many more damages so
Thanks for the comment.
What's app us @ +919744615655 To get updates on Mechanical/ Automobile engineering
Prabhu N anom
Nice
Good explanation Sir
Thanks for the comment
👏🏻👏🏻👏🏻👏🏻
bro.. Turbo RPM will not come 1 lack.. its near about only 1000 rpm..
👍👍👍🤝
Malayali aanu alle
Yup
@@Howmachineworks kettapol manasilayi 😅
what a catch !