Upgrade Your 4x4 Switch To LED Bulbs
Vložit
- čas přidán 7. 09. 2024
- Get Your Bulbs Here....carradiobulbs....
Get The Desoldering Iron Here.....carradiobulbs....
Upgrade you Chevy or GMC 4x4 switch to led bulbs
================================
BELOW IS A LINK TO ALL OF THE PRODUCTS THAT I USE IN THE VIDEO.
Isopropyl Alcohol 99%
amzn.to/37XBA7j
Solder Wick
amzn.to/3wypBp7
Kester Solder
amzn.to/3wrE73h
100 pcs Foam Tip Cleaning Swabs
amzn.to/3PuFuFz
Chipquik Tack Flux/solder paste
amzn.to/3wqcpnr
100 pcs 2.75" Small Head Foam Tip Cleaning Swab Lint Free
amzn.to/3sKnBsC
Stickvise PCB Vise with Standard Nylon Jaws
amzn.to/3a331gF
DC Power Supply Adjustable (30V 10A)
amzn.to/380uQFS
HAKKO desoldering iron
amzn.to/3My1m11
Hakko FX888D-23BY Digital Soldering Station
amzn.to/37Wr3cu
Anti Static Insulation Silicone Soldering Mat Heat Resistant
amzn.to/3PHeL9d
Adjustable Circuit Board Holder
amzn.to/3Mxj8By
Love your narriation style, very peaceful very calming...
I broke the bulbs off and it worked fine
Title = upgrade to LED? Replaced with Incandescent:) Still good info. Thanks
Hello, I am looking into replacing all my dash lights to led. Love the video but I had a question. The orange lights indicating which button is pressed, (the ones you stated almost never go bad) I am looking to switch to blue led instead of orange. Do you know by chance what the part # is for those lights? and are they the same for the "PRNDM" inside the instrument cluster? I have an 07 Classic Silverado 2500 Diesel. Thanks in advance! I know it's possible because I have seen it done, however, can't find any instructions.
i discovered on the one i bought with blue leds in it the plugs dont sit flush on the connector like on the stock Switch
I recently started repairs using the light bulbs and desoldering iron. (it works great) unfortunately, on the last needle removal, the pointer broke off the stem. Where might Inbe able to get a replacement OEM needle, orange, for fuel gauge? I am placing another order with car radio bulbs for the Headlamp Switch bulb. Also, in trying to use the desoldering tool on one of the steering control switches, I kind of melted the base the light sets in before soldering to board.
GMC Yukon 2005
Hi do you know which side does the short leg suppose to be solder to on the board ?
cool video. Thanks
Would this work for an aftermarket switch that has led that you want to change the color of it?
I have no idea I have only worked on the GM switches.
What soldiering do you use?
What do you charge for doing this?
What size are those LED bulbs?
T1