DRILL VS. DRIVER (What's The Difference?!! Cordless Drill Vs. Impact Driver--COMPARISON)
Vložit
- čas přidán 2. 06. 2024
- Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Porter Cable 20V Drill Driver Combo:
amzn.to/3bQc81y
Dewalt 20V MAX XR Drill Driver Combo:
amzn.to/3sNczAn
Bosch 12V Drill Driver Combo:
amzn.to/3qguzS2
Black and Decker 20V Drill Driver Combo (Best Value):
amzn.to/384eyIF
Dewalt Impact Driver Bit Set:
amzn.to/3c3uWdG
Makita 70 pc. Impact Bit Set:
amzn.to/3sL3QyO
(These are affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU.)
==================================
CHECK OUT MY KIDS’ BOOKS ON AMAZON!! DUNGEONWORLD is a funny, fast-paced fantasy series for kids ages 7 and up. (All books are written by me! They’re available below in paperback and ebook.)
ONE HOT SPARK (Dungeonworld #1):
a.co/d/1yFGGBW
THE BIG WHIFF (Dungeonworld #2):
a.co/d/2yyYZRc
BANG THE WAR DRUM (Dungeonworld #3):
a.co/d/cXZJaL7
THE ROYAL MESS (Dungeonworld #4):
a.co/d/jazeVXT
THE GHOUL RANCH (Dungeonworld #5):
a.co/d/bwIOY7Q
I DON’T HAVE SPONSORS, I DON’T USE PATREON. BUT IF YOU’D LIKE TO SUPPORT THE CHANNEL, CONSIDER BUYING A BOOK OR TWO...IT WOULD MEAN THE WORLD TO ME!! :)
===================================
Other tool-related videos!
Chisel Vs. Big Screwdriver:
• CHISEL VS. BIG SCREWDR...
9 Brad Nail Mistakes:
• 9 BRAD NAIL MISTAKES (...
DRILL VS. DRIVER (What's The Difference?!! Cordless Drill Vs. Impact Driver--COMPARISON)
The cordless drill has been around for a long time now. But the IMPACT DRIVER is still a relatively new tool that many homeowners and DIYers don't seem to know about. In this video, The Honest Carpenter explains some of the differences between these two tools!
Cordless drills are mostly just spinning machines. They use a chuck and jaw to clamp down on drill bits--the motor then applies constant torque to turn those bits. This makes them very good at boring out holes.
Cordless Drills can also be used for "driving bits"--bits that are designed to turn fasteners.
An impact driver is a similar rotary tool. But, instead of a chuck and jaws, it has a lockable collet that traps hex-shanked driving bits.
Impact drivers are primarily used for driving fasteners. Unlike cordless drills, they're not that great at drilling (in my opinion). BUT, they're capable of delivering so much more force than a cordless drill, there's really no comparison!
Impact drivers can sense resistance. When driving a fastener, the impact driver will spin like a drill until a certain amount of resistance occurs. At that point, they will activate a "super mode." The motor will begin to detach from the bit, and reattach to the bit dozens of times a second.
This cuts down on bit slippage, saving your arm from having to counteract that force. But, it amplifies the force sent through the tool into the drill bit.
Impact drivers can often drive really large, long drill bits without even pre-drilling (though pre-drilling is still a good idea.)
Cordless Drill Vs. Impact Driver--COMPARISON:
Cordless drills are still my preferred tool for driving fasteners.
But, impact drivers are a tradesperson's best friend. They make driving and backing out difficult fasteners extremely easy. They also save wear and tear on your arm!
I don't, however like to use the impact driver for drilling holes (even though they do make custom drill bits for loading into the impact driver).
I also still prefer using a cordless drill for driving smaller fasteners, like decorative screws.
I hope this DRILL VS. DRIVER COMPARISON was helpful!
Please be sure to visit us at The Honest Carpenter Website:
www.thehonestcarpenter.com - Jak na to + styl
Drill: Go in there please
Driver: I wasn't asking
😆
That's what I'm talkin about!!
Best explanation ever!
😂😂😂
😂😂😂
*Pre drilling is not only used to prevent camming out, but also as to not split the wood.
100% alot of people forget this
That's the only reason I predrill usually.
Facts!
Depends on the bit and the wood but yes. Also drywall screws suck so much.
@@uk_siren A lot. Two words.
So glad my phone is always listening to me. Was talking to a few friends and wasn't able to really describe the differences, and then this video is suggested! Gotta love the surveillance State.
Surveillance state? Are you high?
I literally bought a DeWalt combo kit tonight and had this video pop-up. Never felt safer
@@dustin6599 most likely
Um youtube is a privately owned industry, not a State. How are u not aware of that?
I encourage you to research how the internet works.
I've built tons of Ikea furniture as a contractor. Never once have I used my impact drill. I've seen so many other guys blowing through soft cheap Ikea material by using an impact with way too much torque for the job. I always end up just sticking with my drill/driver "combo," putting it on "screw" mode (not drill/hammer) and turning the power dial down anywhere from 1-5 (out of 25) depending on the screw length/size.
That's how you know you are assembling garbage.
Should be required watching for all DIYers and most pros! Your explanation was crystal clear!
Thanks buddy! 😄 Been wanting to make this one for a while!
@monkeygraborange - I thought you only made comments on news channels shooting down liberals . Keep up the good work and ATB .
This was really helpful. Just gat a Drill/Driver set & was pretty fuzzy on when to use the Impact Driver. Thx!
Nice and easy
I always knew that the 18v was for your basic small jobs! I knew that they lacked that the finishing power. You however explained it perfectly and technically sound why the IMPACT is the next step up!!! It's a finisher and closer!!! Great presentation my guy!!! 💯 ❤️!!!
As a single, female homeowner I find your videos to be clear and concise and very helpful. I like to fix and build what I can myself to save money and save the big or difficult projects around the house for the professionals. I enjoy doing things myself to fix or improve my home. CZcams and channels like yours has been a huge help answering nagging questions I’ve had as well as questions I didn’t even know to ask! Thank you for your excellent content.
Me too
@Airbus A380-800 true but in her case, she’s saying she doesn’t have a partner to rely on for home fixes.
Absolutely agree! Doing things I never thought I would, and am enjoying it. I now come to The Honest Carpenter prior, during and after to see what I'm going to do, how I'm doing and after as a final check. Can't tell you how valuable you are in my life! And now I'm understanding the Why's. Thank you so much! Almost finished with one room~ now on the next! 🎨🔨📏🚪🏡
@Airbus A350 her point was obviously that there's no one to help her, no need to be twat
@Manila Vanilla thanks for agreeing hun x
The best thing I found for using the impact driver was for taking out rusted fasteners. The drill couldn’t budge them but they came out with no effort with the impact driver. That alone changed it from an unused tool to an often used tool.
Until it busts the head off the screw! 😢 Happens to me sometimes!
@@fredalackenspeil9371 I think that happening to the drill too :( happened to me.
@@fredalackenspeil9371wd40 and lefty righty
Thanks for explaining the difference & how to use the drills. I used one for the first time when I was trying to mount some L brackets to the floor joists to add some ceiling storage. I predrilled with my drill and then tried to put the 2.5 inch screws in. I thought I was going to cry because, the screws wouldn’t go in and I was afraid to use the drill further because of damaging the screw head. I didn’t have the strength to do it by hand, (I’m a 100 lb, 70 year old female) so I asked my neighbor for help. After assessing the situation, he brought in his impact drill. I couldn’t believe the difference, I was able to finish my project by myself which had 10 more screws to do. An amazing tool & thanks for explaining how they operate so clearly. I’m going to get one of my own as I want to put some shelves in my garage.
Thanks for explaining the differences so well. I finally get it!
Thank you Tony! I’m really glad it was helpful 🙂
I really didn't know the difference between a driver and drill. This was very informative. Thanks.
Thank God someone finally cleared that up... a revelation for the DIYer with arthritis! I did not know what to do with my new tool...an impact driver… Never would have thought that it would save the muscles and joints in my wrists. Manufacturing companies need to include THIS video with the purchases of their driver/drill combo sets for folks like me 😂… (Now I know those bands on my new drivers mean they are specially made for an impact driver). Thank you for making this easy for someone who enjoys DIY as a hobby.
I just came to see wtf an impact driver is and now i'm subscribing. Thank you for the lesson, sir!
I love tools! Several years ago I started buying my own....the ones I wanted, not what my husband thought I should have. I got the combo drill driver set but I never knew how or why to use the driver. I had watched lots of guys using one in their videos but never heard why or their purpose. I finally decided to figure it out, first learning curve was to learn how to use the collet! When I successfully used that driver, I fell in love with it! I'm 76 and don't have as much strength as I used to have, especially with my arms raised above my head. I have to get my shoulder behind it when needing to push. Once I figured out that driver.....Katy bar the door! Now, unless I just can't get up high enough to reach where I need to drill, I don't have to ask for, let alone WAIT for someone taller to help me out. This driver is so much easier to use and gets the job done without a lot of frustration from improper use of the drill on my part. Thank you for explaining this tool. I totally understand it all now!
I'm 50, got in the construction field in my 20s, after buying a 100+ year old house that needed tons of work. I was a single mom to 4 sons at the time & wanted to learn to do repairs myself & teach my sons as well. I retired after adopting my last 3 foster babies, but still take on local jobs that interest me. I hope to be doing this at your age. Your true inspiration!
@@jamiepatterson558 thank you, but you sound like a true inspiration to me. I’ve never HAD to do it, but I’m fortunate to have had a Grandfather who instilled within me that there wasn’t anything I couldn’t do if I wanted to do it. So even today, while I may have slowed down a little, I still do pretty much what I want to do when I want to do it. Thanks for your comment, it made my day.
For a new home owner with no tools this was extremely helpful
Have you remedied the no tool situation?
Lmao
@@paulsmallriver6066 yeah man got really handy too. Lol
Thank you so much! I am a woman who is introducing myself to electric tools late in life. I bought a "Pink Power" drill a few years ago, I don't use a drill much but Oh! my goodness, they are so much better than using screwdrivers! However, it is not a powerful drill and I am tired of having to borrow my neighbors tools so I am going to purchase myself a full power drill for myself this fall. When I look at the ads, they all say drill/drivers. What in the world does that mean. I want to thank you so MUCH for your direct, simple comparison with visual comparisons. You didn't make a video about yourself, you made it to help people understand the difference between the two tools. You didn't talk unnecessarily and wasting time. You got to the point and I got all the knowledge that I was looking for. Much appreciate you.
This was really helpful, and addressed SO MANY questions I've had in the past while trying to do the exact things you're describing. I live in a rural area in Japan and don't have the language skills to take a DIY class on construction, so these videos are super helpful. Thank you!
"It's like using a sledge hammer to swat a fly" immediately subbed after this. Great explanation!
I’ve seen drill and impact drivers advertised a lot. But just thought it was a money making thing for the manufacturers. Thank you so much for being clear and concise on their deliberate, and separate functions.
Thanks Ethan, that was really helpful. I've been putting off getting an impact driver and you've convinced my that it has a place in my tool chest. All your videos are so informative because you are clear and concise in all your presentations. Awesome channel, keep up the great work. Take care and stay safe 👍👍
You do a good job explaining it in both a simple way, and also into more technical detail. That's really valuable and not everyone can do that.
OMG!!! Thank you! I've been getting this awful pain in my wrist, my thumb, my forearm after connecting 2x4's to posts with 3" screws. I've had that impact driver in my DeWalt kit and just never used it. As someone who is learning on the go or "by the seat of my pants", you have been a godsend. Perfect explanations, thank you thank you thank you.
Tip: if you had to choose and could only have one, go with the driver. In a pinch it can drill fairly well for most general maintenance jobs but a drill can't impact drive for fasteners at all.
WOW! I’ve been searching for a great detailed explanation between these two, and finally found it.
Great job explaining this to a new once-in-a-blue-moon DIY-er!
Excellent description of the difference between both tools for beginners! My understanding of the operation of the Impact Driver (ID) is slightly different: When Impact Mode kicks in, the driving mechanism inside slams repeatedly against the shaft. Think of a series of short but powerful high frequency hammer strikes (impacts), only the striking is done in a rotary motion instead of the somewhat linear motion of a hammer strike. Similar to smacking a wrench with a hammer to free a stubborn bolt...only much higher frequency.
As a soon-to-be-retired Woodshop teacher and avid DIY'er, I'd like to add my slightly different experience to the discussion. I often use my ID to drill holes. A cheap hex end drill set (suitable for DIY'ers) can be had at Harbor Freight. The ID is smaller and lighter hanging on my tool belt. Changing bits is quicker and easier. Lastly, I've NEVER had my ID kick over to Impact Mode when drilling holes even in hard wood, so it DOES supply the same constant torque that a Drill does.
Also, when the ID kicks into Impact Mode, the RPM's at the drive end drop dramatically. This can be good or bad, depending on the situation. I like the ID for more precise depth control when driving fasteners where the depth is critical. As the fastener head approaches the surface of the wood, Impact Mode kicks in, slowing down the progress and allowing for accurate control of fastener depth for those cases where you want the screw head perfectly flush with your surface.
I've found the adjustable clutch on Drills to be unreliable as a means of fastener depth control, likely due to the variances in wood density...even in the same board. I NEVER use it. With a little practice and a fair amount of hand-eye coordination, one can learn to release the Drill trigger at precisely the right moment, especially if the speed is reduced towards the end of the drive.
However, on long 3" screws, the decreased RPM's provided by Impact Mode result in significantly slower progress and longer drive time...not to mention the increased noise levels! So I prefer the Drill for driving most long screws quickly. Combined with Star-drive screws, "camming out" is virtually eliminated.
And for almost all fastener driving in softwoods, pre-drilling is not necessary with modern powerful cordless drills (12 volts and above). 3" Deck or Drywall screws can be driven with ease with a Drill. We all did it for years before ID's hit the market. Hardwoods are a different story!
While we're on the topic, I know the Canadians love their Robertson (square drive) screws. I've tried them a few times and they were a little better at preventing cam out than Phillips head, but they still required significant downward pressure to do so. Even then, they cammed out occasionally. Torx Drive (Star) virtually eliminates the need for downward pressure to prevent cam out. They are more expensive than other screws, but so worth it!
Happy building!
As a carpenter i second all that youve said.
My impqct is my main stay. The drill is used to supplement my id. Almost everything can be done better with the id. I basically o ly use the drill to drill pilot holes so im not switching bits like crazy. I could easily get away with not having my drill.
I like drill as my main driver for longer screws. Quicker and less noise
If one will complain about the high noise from impact drivers. try “pulse” drivers, or “hydraulic” drivers. These kind of drivers can operate with up to %50 less noise than a regular impact driver. some poplar brands makes them, such as.. Milwaukee, Ridgid & Ryobi .
I think you’re using home owner tools (crap power tools like Ryobi, Black and Decker anything from Harbor Freight) because sinking a 3” star head deck screw with an impact should take less than 2 seconds, even a big timber lock should be able to be fully sunk within 7,8 seconds no more. Try using a DEWALT, Milwaukee or Mikita and then you’ll be able to use the pressure clutch trigger to see instant results
@@chowderwhillis9448 you'll be surprised that ryobi is not that far from the big three.
The impact driver is also great for removing screws/bolts. I was just helping someone move and my impact took the crib, couch feet, and entertainment center apart so quickly, it easily saved me an hour.
So quick they didn't have time to take the baby out of the crib. = P
I remember prior to cordless drills you had to screw everything in by hand and a 18" Yankee pump action screwdriver was the game changer. We all had one arm significantly bigger than the other.
I still use my yankee on large maintenance jobs so I don’t have to haul batteries around.
I see the logic and the honesty in your video narratives...you are great at this. Your channel lives up to its name!
Good explanation of the differences between these two tools. Really good to know what a game changer impact drivers were. Their sound is ubiquitous on every build site today. Keep up the vids you're really helping this DIYer 👏
My non-carpenter friends make fun of me for having "two different drills that do the same thing." Now I can show them this video and tell them to shut up.
I always thought that it was weird and overkill that tool kits always include both
@@se5594 yeah it seems weird but when you need an impact gun, you'll be happy it's there.
Don’t show them the video, just tell them to shut up.
Thanks! I’m old and have only used drills for driving screws. I never understood the difference between a drill and impact driver. You did a phenomenal job with your clear explanation. I’ve just purchased my first impact driver and can’t wait to use it correctly.
How'd it go?
@@chezchezchezchez yes, i like to know too!!!
@@davidn.edmondsii7245it probably broke LOL
So thorough, the best use of 8 minutes I've seen in a while. I've got a simple NiCd drill and was debating getting a Li-Ion drill since I 'cam out' often and battery is old, but I debated driver since I'm more of a mechanic than a woodsman. You covered everything and I think the driver is for me and to keep the drill around for the holes. Thanks!
That was really helpful. When I bought my house back in 2015, I treated myself to a set of cordless tools and both of these were included. I never understood why there was a smaller drill in the set...now I know what it is and how to use it.
as a homeowner I bought one impact driver that I use for drilling holes, driving nuts also work on my cars, cleaning kitchen, restrooms. all in one tool.
“i use a drill for drilling, and a driver for driving.”
…well when you say it like that
I tried to argue, I couldn't
😂😂😂🤭
My thoughts exactly
Very informative. I have used my drill as a driver pretty much my entire life. I do the pre-drilling often bc of the difficulty of driving a screws into various materials. Your video showed me things I didn't know and the pros and cons of each power tool
Best explanation of the difference between drills and drivers I've seen. I also appreciated the difference between bits used by each tool which other videos have failed to include.
Thank You
I've had a Hitachi drill like yours for well over ten years and still love it!!
Excellent - thank you. I was having consistent trouble getting longer screws through thicker wood, now I know the driver is a must have.
Good to know that driver bits are special. Also liked the pointer about using a drill to drive small fasteners. Thanks!
I’ve come to a partial conclusion that it depends on how much you’re using them. The reason being I only started on the tools 7 months ago and knew NOTHING about tools at all. I was meant to be working in sales for CCTV but due to staff shortages I got pushed into installs, and had to learn in a few months what people take years to learn (no joke, your videos were a MASSIVE bible for me).
So yesterday I’m using my impact driver to bore a hole in a top plate (not sure if Australian terms and American terms are the same) as I usually do, with a 25mm spade bit then BAMBBAMBAMAM scares the bejesus out of me and the Milwaukee M18 shit itself. So there I am in someone’s attic and it’s like summer heat, and I’m in mourning (luckily it’s under warranty), grab the M18 drill and make mince meat out of the top plate. That hard wood was like butter! Why the f**k have I been using the driver so much?
What we figure is that I used my Impact Driver for almost everything and it was too much for it. So it went in the shop and today I used the drill for the entire 8hr install and it was almost effortless.
So for me it’s this: want a hole, use a drill. Want to put in a screw, use a screw driver (impact) Want to screw more easily, use both and make a pilot hole first.
Love my driver. Got 1/4", 3/8" and 1/2" socket adaptors and use it on my vehicles a lot
Wow, this was a VERY informative video! I recently picked up a Dewalt drill & impact driver set and didn’t really know the difference until now. Thank you! 🙏🏽
Thank you so much! I just saw an ad for a new line of tools from Lowes and they had an impact driver in their ad, and I had no clue what the difference was so thanks for clearing that up!
Probably the best video on youtube that explains the differences. Good job !
This is awesome! I've been researching this for about 6 months and your explanation is absolutely the best and I have a lot better idea of what I need! Thank you so much!
You’re welcome Dan! Thanks so much for watching!
That was Great !
You hit a Home Run with explaining the difference between the two, but more important the "when & why" of using both of them. Thank you Ethan, you're a master.
Agreed
GREAT video. Clear, concise and not a lot of extra wasted time. Keep up the good work!
Great video. For yrs, I have watched handymen use a "drill" that seemed to drive screws (without initially drilling a hole) with ease, yet I was doing double work drilling a hole, then driving a screw. After this video, an impact driver will be on my Christmas list. Thanks.
I was like you. The video was a revelation. 😁
Normal drill will do the same thing
Awesome, just bought the dewalt set and thought I’d never use it, learned a whole lot man! Great video.
I love my impact driver. But there is times where the clutch on my drill was necessary. Just to keep from striping out the holes on prefab metal sheds.
I’ve watched a dozen of these videos trying to explain this difference. This one was by far the best I’ve seen. Thank you!
I got into this hobby in just over a year, and only now I realize the true difference between the two. Thank you!
Thanks for this video. When I asked guys at the shop, they basically just said it was stronger but didn't know the mechanics behind it.
as a 30-year-old who grew up with everything done for me, and a recent first time homebuyer, i’ve found some of your videos very helpful. thank you!
Haha 33 years old but same story
Wow, must be nice to not work or do nothing, have it all silver spoon feed.
Most likely got your house handed to you as well.
@@evetsaderes2721 cry a river sally
@@evetsaderes2721 jealousy will get you absolutely nowhere in life. Try a different strategy.
@@alan_davis I ain't jealous of being lazy. Must have me confused with someone else
without a doubt the best explanation on youtube. Thank you!
Finally!! A video with a simple and smart way to explain the difference between both products!! Thanks!!!
Thanks for the really good explanation. I was just on the verge of buying a cordless drill thinking it is the same as a driver but of course I couldn't have been more wrong.
Thank you! This was what I wanted to know when all I want to do is drill holes in my auto chassis - where drills are better. However, seems like drivers are more suited for screwing and unscrewing.
Thank you so much. I never understood the difference before. Based on my experience of using these tools, my mishaps will now be corrected. Thanks. Love your channel. I'm learning so much.
I only recently discovered this channel and it is now my go to for tool and building tips and information. Great channel and great presentation of information.
This was a excellent at explaning the particulars of each! I'm subscribing to watch your other videos 🤗
Thank you, Latasha! More videos coming soon 😄
My goodness, excellent video! I’ve been using both tools for years and never really understood the difference until now. Thank you.
Thanks Tom! It was a long time before I really got how these things worked 😅
Excellent discussion. Very clear and to the point.
well, I'm hooked. always felt like I was just winging it with which tools to grab and why. this helps so much, thank you!
One other thing: if you want to remove a lot of material with your impact driver while using it to drill, you will often quickly ruin auger and spade bits. The ratcheting torque dulls the bits _very_ quickly.
So what's the best strategy to help wives understand the importance of having both?😁
Just watching this video aught to help! I agree my husband need both!
That u need the help of supernatural being hahahah
Grow a pair and show leadership at home, b your woman won't respect you if you keep being such a beta male
The strategy is don't ask. Just buy what you need. She is your wife, not your mother.
I have the same problem. A friend told me that sometimes it is much easier and more efficient to ask for forgiveness than permission.
Thanks so much for clarifying how and when to use the drill vs driver. I picked up the impact bits you suggested in another video and my latest project is well on its way to completion.
As a DIYer, I really appreciate your videos, a lot! Thank you!
...and that's why I started following you.
Thank you Pablo!
Thanks for this! I always thought I just had a weak battery drill when it wasn't driving screws in. I thought impact drivers were only for mechanical car work. Now I know.
seriously I stumbled upon you because I didnt know what an Impact driver was ( I need one in my life!) - your video is so wellmade, explained and put together that I have no other choice but to sub!
So nice that you add summary of sorts in the description. Very helpful. Wish all do the the same to their videos.
Totally agree on their uses! I like using a cordless drill/screwdriver for assembling/disassembling furniture and such, like taking the legs off of a kitchen table. The reason is the drill/screwdriver has an adjustable clutch so you only use the amount of torque necessary without stripping threads or fasteners. Your typical cordless drill/screwdriver is also 2 speed, which is handy for drilling in metal. I never knew the difference on the bits, so thanks for that tip.
dude i always wondered what that noise was! thank you for this!
This is what I like about videos, concise and to the point! Excellent presentation.
Best video I've found for detailed explanation of a impact driver.
Thank you for this video. I’ve had an impact driver for several years now and never knew what it was for. The drill and impact driver came as a set and were given to me as a gift. I’ve also had dozens projects over the years in which I should’ve used an impact driver. Now that I know maybe I’ll stop screwing it up so much. 😂🤣
Hi, I have just discovered your videos and love your clear and concise style. With over 40 year's of building under my belt I am still learning, and so I still find these useful.
Re impact drivers. The biggest problem with them is that it is very easy to strip out the threads, especially on smaller screws and bolts. Too many times I have come across pre assembled items where you can pull the bits off due to stripped screws. For that reason I will now install smaller screws with a smaller battery drill, or even by hand (#7 or smaller)
It's very cool that you're still open to learning!
OMG I literally have the Porter Cable combo but never knew how to use the funny looking "drill". Thank you for this!
Steady flow of well articulated information in a logical sequence. Bang on.
This is an important thing to know. Thanks for elaborating the difference.
Your videos are absolutely fantastic! I've learned so much by watching them. You keep everything straight and to the point. I LOVE tackling my own DIY projects and your vids are my go-to source for doing the job right, thanks a million, Ethan!
Thank you, Bob! I’m really glad the videos have been helpful. I appreciate you watching, work safe! 😄
That was great! Thank you! I've got an impact driver in the garage and never used it because I didn't know what it was. I usually just use the drill. I'll definitely try it on my next project.
Thanks for the video. Just received an Impact Driver for Christmas and had an idea what it was used for, but not totally sure. Now I know!
Just one of the best clips I've seen. I Learned so much here I'm going out and getting a combo, impact/ hammer drill this week. Great information for casual users. I always wondered why I strip so many screws. I thought it was only because they were all made in china and were cheap junk like most everything we buy today. thanks so much.
As a woodwork DIY enthusiast of many years, who finally decided to walk the walk and make MY FIRST professional purchase, I could not have stumbled on a BETTER video! Thank you
Just got back into construction. I was getting out right when everyone started moving to the impact driver. I've wondered about this. Thanks!
I see a lot of impact driver users breaking fasteners and splitting wood and driving too far through the material. What the impact driver is missing is the feel. Sometimes, such as in cabinetry, I go back to the old screw driver (even with beefy screws) to get the perfect bite. And yes, you can provide more torque manually than with a dewalt battery powered "drill". Predrilling is always best for me if I have the time, small drop of wood glue, use the drill to drive in most of the way and fine tune with the screwdriver. Sounds labor intensive but what it creates is permanent. Also, my wrists and elbows do hurt quite a bit...
This was helpful as I just got my first impact driver in a drill/driver package. I didn't know that last part about impact drivers requiring special bits. I am so use to pre-drilling holes to prevent wood splitting that I can't recall the last time I just screwed a fastener in without one. You've convinced me to use both now.
Second video of yours I just watched and your explanations are EXCELLENT. Awesome job.
Thanks a lot for this. It really explained all of the issues I have had with a drill my whole life. I just never knew the difference.
Thank you so much from a novice DYI'er! How many times I've stripped a screw will now be minimized! {smile}
No kidding! I've done everything I can think of to prevent screw heads stripping: pre-drilling; using brand new screwdriver bits; putting all my weight on top of the drill when turning in screws on a horizontal surface....nothing works!
I'm wondering if everyone who looked at me blankly over the years when I asked them why my screwdriver bits always stripped the screws was already using impact drivers :I
You explained this better then anyone else, you earned a subscriber!
*than
Wow thanks for clarifying the difference. I’ve have an Impact driver but haven’t used it. Now I can use now. Thanks.
Never gave this subject much thought but wondered why so many "kits" include a drill and a "driver". Your explanation was very thorough and helpful. Thanks.
Excellent video. Highly recommend Torx drive fasteners over anything else (especially Phillips) to reduce cam outs.
Sounds like you have some experience. I came to same conclusion. Phillips is a hit and miss experience, and the longer the screw gets and the harder the wood gets the more miss you'll experience.
Once you've switched to Torx, every time you see a Phillips it's that sinking feeling of compromise.
The Phillips lottery of cam outs.
If you're from the U.S.A. you may not have heard of another good screw head---the 'Robertson', sometimes just called a 'square head' screw.
It's exactly what it sounds like, and keeps the drill/screw driver bit much more securely gripped than a Phillips.
On the other hand, I'm betting that Torx head screws are even superior to Robertson for holding your bits firmly.
@@be5952 aren't square head and Robertson actually slightly different? Thought I heard at one point that Robertson have a slight taper that the square do not have. Don't think I have ever seen an official Robertson to actually know though.
@@BlackSmokeDMax "Square head" is a layman's term for Robertson. And yes, it does have a slight taper which is necessary for the tool head's ease of entering and exiting the screw head, otherwise you would have to be exactly perpendicular at all times (which is next to impossible). You will notice that cheaper, off brand tools and bits will be more "square" with less obvious taper (such as found in most "kitchen drawer" multi bit screwdrivers with the unused bits stored in the handle) and are more likely to be called "square bit" than "Robertson" simply because the homeowner isn't knowledgeable about the nomenclature.
As a side note, if you look closely most hex bolts also have a slight taper to their heads as well for the same purpose, to allow the wrench to be put into the proper position before applying the turning torque. Whenever we encounter a bunch of bolts from say the 1950's it is very noticeable how much harder it is to get the wrench onto the bolt, and how much longer it takes to get the job done if you only have the space to make a quarter turn at a time compared to bolts nowadays.
I needed this video!
I’ve recently started working in a fasteners supply business & your explanation really helped me! Thank you😊
I bought one when I built a deck. I love using it. And still look forward to doing projects that I can use it.
Of course, one great way to prevent camming out is to use Robertson (square) head screws instead of Phillips (X) screws. I always use Robert’s for everything, and I was building a big project last night, and ran out of Robertson. I had to substitute Philips, and what a difference! The Robertson all went straight in first time, the Philips all jumped out at least once, and I started to strip the head on one. I don’t understand the obsession with using these ancient design screws, when much better ones exist.
Ugh. Square drive was the absolute worst. One mistake and it’s stripped. Torx is the indisputable king of fasteners.
Well I use Phillips not be ouse they are good but in me country the same scrow with torx cost duble the Philips so that is a problem and square are onli available in special wood shops and are very expensive I don't live in facy usa