amazing stuck injector removing in
Vložit
- čas přidán 20. 03. 2024
- stuck injector removal,stuck injector,injector removal,how to remove stuck injector,injector,diesel injector removal,diesel injector,stuck diesel injector,injector puller,how to remove a diesel injector,injector remove tool,injector removal tool,stuck diesel injector removal,seized injector removal,crdi injector remove puller,injector opel 1.7 cdti,fuel injector testing,seized injector,injector cleaning,fuel injector,six cylinder diesel engine piston fitting,pistton fitting,piston,how to install piston rings,six cylinder diesel truck engine ka head ma piston ke fitting,diesel engine piston fitting,six sylinder diesel engine,six cylinder diesel engine,diesel engine,6 cylinder diesel engine,six sylinder diesel truck engine ka head ma piston ke fitting,valve adjustment,rebuilding engine,cylinder sleeve installation,engine,engine restoration,how to rebuild an engine,engine rebuild
- Auta a dopravní prostředky
Sprinters injectors are either really stuck or come loose while driving. Never in between.
100% agreed.
Or Ford 5.4 spark plugs 😭
As benz tech i can only agree 😂
gotta love that 2000psi fuel rail system lol its so high pressure once they leak they hydraulically cut through the head where the crush gasket sits never to function as intended again. best worst engine they've ever made..
Esattamente
It's a rough day when you gotta pull start the minivan. 😅
Pulling it out under an angle doesn't work better 💀
Was thinking the same thing. Good way to snap the end of the injector off and then you are really having a good day.
😂😂😂😂
So what you’re saying is he doesn’t need to be standing on top of that car like a giraffe 🦒 😂
@@calebkeohan8 sort off 😂😂😂😂
Господа, если это форсунка спринтера - прогрейте двигатель, и вытягивание на горячую в ЛЁГКУЮ.
Тот самый момент когда хозяин сервиса экономит на спец инструменте
I can see this ending badly for his jawline
Старые немецкие дизеля были намного надёжнее.......
Это спринтер 2001-2005, у меня такой 2,2 cdi прошёл 1,2млн и я его продал, и новый владелец ещё проедет столько же если на масле экономить не будет и турбину с насоса и обслуживать, куда надёжнее?
Чтоб это не было это
Нужно 50тисяч км заменит шайбы под форсунки!☝🏼
это не шайба держит. алюминиевые стенки прикипают к форсунке. Попадания влаги, коррозия, может адгезия, может электролиз.
@@MrFugison разность материалов
@@maestroandrey8908 с современными электрическими форсунками эта проблема стала очень заметна. На форсунки подаются импульсы от 70 до 100 вольт, поэтому мне кажется при попадании влаги возможно и электролиз немного происходит. Головка сидит на массе, а от утечек в том числе магнитных уйти не возможно.
На кайроне такая хрень с 4й фарсункой, ее лучше смазать графитовой смазкой.
Feed it some break clean and turn the motor over a few times. It'll pop out.😂
Injector Not to be seen again 😂😂
Mach das mal bei einem Auto welches 20 Jahre alt ist und noch die ersten Injektoren hat! Am besten noch mit 300.000km
@@kevinscherzinger2726 Vw t5 2.0tdi lässt grüßen 😂😂
@@kevinscherzinger2726chyba 1300000km🤣🤣🤣
@@djrigga Injector? I barely know her!
Мы так один раз головку выбили. Вместо форсунки 😂
Соосность соблюдать нужно когда выбиваешь..
На самом деле мерседес надо просто открутить крепёж и ездить пока не выплюнуло само...
Lmao
@@Thumper2Kewl shljamBur?!....
А если уже не работает двигатель ?
@@jonkhachyan1217зачем тогда форсунки так выбивать?
Лучше нагрели и охладили с водой несколько раза...
@@jonkhachyan1217 тогда конечно Печалька...
This is why I am no longer a mechanic. Jobs like this are never appreciated.❤❤❤
Me too
you dont do your job for attention lol you do what ur passion is
@@greenespirit4973👌🏽💙
@@greenespirit4973that’s what I’ve been saying for years. Just because you were a mechanic before doesn’t mean you should of been one. Appreciate your profession, not what others think or tell you what to do. Also appreciate the work you done yourself! Not have Jim bob give you the worst advice about how you can do things better
Appreciated like they don't pay enough for this
The Jerkovsky Method in action 😂
Slide hammer, very useful, hard to find, even harder to find fittings for them, which is frustrating
That right there upped the Labor Charge to double.
Poor sprinter needs a cylinder head now.
Каждые 70 тысяч снимал и менял шайбы ,болты и смазку, все было ок.
А это жадность или халатность
А еще ани не знают что такое нагреть и раскоксовка😂
@@Tdwt-ig3xtв данном случае не помогает
Как это знакомо!😅
Пацаны как я вас понимаю! Но есть классный Съёмник для форсунок!
Коли форсунка прикіпає вони непомагають вони ламаються 😂
это жопа
This video has Eco-Diesel energy
With a motor mount and a screw and an impact gun, it can be removed very easily and without damaging the piece.
At first glance I wondered why Freddie Mercury was dancing on top of that vehicle, not gonna lie.
Первые две ладно. А остальные как вынимать?😂
How to break a engineblock
Last I checked the injectors fit into the head and not the block
Lucky it was the front injector
Очень удобно!😅😂🎉
Мы на таком спринтере месяц ездили с открученой форсункой чтоб она наконец вылезла. Сервисники не могли ничем выдрать
Что не смеётесь? Не смешно? Это Мерседес!
А открутить забыл😂😂😂😂
After lunch they will realize its left hand thread
That angle is off 😂😂😂
The copper sealing washers should be replaced every 30000 miles and this will never happen is what I tell all the sprinter owners
А как четвёртый цилиндр????
Че за Литовский Экала Бэкала?
The reality is he forgot to remove bolt and holding clamp.lol
Acetylene torch does wonders after you soak a blanket wet and lay in around the motor so you don’t blow yourself up but works everyone.
How you gonna do the ones in the back?
Бурак теперь и в автосервисе работает?
The curse of the Mercedes injector 😂
Those are notoriously difficult on the sprinter.
Почаще нужно показывать всем кто хочет купить современный дизель.
Stuck? That injector is welded in lol
Счастливая форсунка😬
this is why I work on my own vehicle. maybe this person is from Florida
Theres no way that the hole is good anymore.
Got to love the T1Ns
Start them out, compression is your best friend
Я больше 10 лет езжу на мерседесах, и ни разу в моём опыте,не встречал такое, что форсунка не выходит
Дизель СИЛА!
Typical mercedes injectors lol
iveco dayli engines lock the nozzles exactly like this, we suffer a lot from this here in Brazil
Third video today of injector removal 😂. CZcams is telling me I may have an injector problem
What about the back ones. I would build a puller rests on the valve cover rail.
Wrong tool for the job
nie lepiej odkręcić i jeździć obserwować? na pewno bezpieczna metoda
Приваривал стальное кольцо от 406го. колена и долбили обратным прессом, которым кузовщики газелевские рамы рихтовали, плюс ведро вэдешки и хрен. Разбил клапаную крышку зубилом и снял голову. Голова, под замену.
HELOU REBJATA . UUUUU KAKAV MOTOR . ALI IPAK GOLF 2 DIZEL 1600 CM 40KW. ZAKON ILI SAVRŠENSTVO MEHANIKE .
400 тыс на родных форсах😂😂😂
I gotta watch these shorts with the volume off , every other short has this song , getting real annoying
Did he try asking nicely
Именно поэтому я не занимаюсь ремонтом дизелей)
Next job. Head replacement.
Definitely need to be straight not binding it up on the block
There's a hydraulic special tool for pulling the injectors
This song needs to end now!
Just simple turn the engine over and let compression do its job
Ну да)) из за угла лучше тянуть))
Bruh why doe the front of the vehicle look like my vehicle :/ but it's not the same vehicle
Just pull the car out of the injector, not tge injector out of the car
хорошо ! а как остальные которые которые в глубине там не размахнёшся
Что это за дикари?😢😢😢
Nagkaru mit pinakaistock up na daytan..
What is gonna be really hard if you pull straight up when you want to come out in angle
Jajajajaja con el efecto de la transición pensé que había arrancado el motor y salía disparado jajajajaja que susto
Wind that nut down on the slide hammer, losing a bit of energy there.
Daqui a pouco arranca o motor 😂😂😂😂😂
The tools not long enough 😂
Appreciate your working conditions
I did this in the Volvo boat rocking in the water in July in Florida ✌️ effing injectors
Makes you love carburettas more...
This song ruins every video
You are not pulling straight...
дизель это экономно говорят те кто его не ремонтировал, пусть это будет сюрпризом продажей почки у них их 2 пока еще
10kg metal kisa mesafe 2kisi
Сколько я крышек поломал гидравликой? Парни это безполезно!
I got mine to loosen after i undone the retainers a couple threads and took it for a drive......
Down there for dancing
Трек на фоне не очень, тут больше бенибенаси подойдет
Съёмник для форсуночных и перед этим залить обезжиривателем на ночь
Поки виймуть форсунку трісне головка
Szacun dla lacznika zamontowanego między kierownica a pedałami.Zamiast sprintera to homonto i ogień , chodząca kupa szofer
What are you guy’s doing this is dark ages stuff there are tools out there for removing injections 😂😂😂
Hes pulling at an angle..
Put anti seize on the threads next time, that's temperature compatible
There's no threads ;)
@Jeroen74 didn't know that, well I guess your fucked
Какое грустное зрелище 🙁
It helps to take the bolts out first
This Mercedes diesel injectors always give probs and they are kak expensive
Страшный сон дизелиста . удар слабоват
Прикепают наглухо на себе испытал.
Эти форсунки много встречается и есть такая!
Как надоел этот крикливый мужик