How To Install A Remote Starter System (Jeep Liberty MPC RS0)
Vložit
- čas přidán 11. 07. 2024
- In this video I will show you how to install the My Push Cart RS0 Remote Start System on a Jeep Liberty. This remote starter will allow you to use your factory OEM key fob to remote start your vehicle. Once installed all you have to do is press LOCK three times and your vehicle will start!
*Some vehicles will need a relay installed for the three lock start function to work properly. Your tip sheet will explain this in detail, or you can just ask in the comments and I would be happy to help*
Remote Start System WITH Power Locks - goo.gl/UwiZJf
Remote Start System WITHOUT Power Locks - amzn.to/2XmbsJF
Vehicle - 2005 Jeep Liberty Renegade Edition 3.7L
Patreon - / rockyxtv
Facebook - / rockyxtv
See a complete list of parts, products, tools, supplies and everything else used on Rocky X TV here - www.amazon.com/shop/rockyxtv
-- Cameras --
- Sony FDR-AX33 4K HandyCam - goo.gl/24W3Ym
- Sony HDR-AS300 Action Cam - goo.gl/jEdDg9
- Anart Action Cam 4K 140 degree
- Anart Action Cam 4K 170 degree
- Anart Action Cam 4K 170 degree
- Anart Action Cam HD 170 degree
- Anart Action Cam 170 degree
-- Microphones --
- Movo WMIC80 Wireless Microphone System - goo.gl/P9MfP4
- Saramonic SR-WM4C Wireless Microphone System - goo.gl/XHCqS1
- Saramonic Vmic Super Cardioid Microphone - goo.gl/fJ28rm
- Samson GoMic - goo.gl/dfMU18
-- Other Equipment --
- Sony AKA-MCP1 Lens Protector - goo.gl/xJ4Rqg
- Saramonic SR-AX100 Audio Mixer - goo.gl/zQtJQi
- Ravelli AVTP Pro Video Tripod with Fluid Drag Head - goo.gl/rSPWyr
- Ravelli ATD Professional Tripod Dolly - goo.gl/uEzh6E
- LimoStudio Lighting - goo.gl/mnSg7e
- 52mm 0.43x Wide angle lens
- 52mm 2.0x HD Telephoto lense
- Adobe Premiere Pro
-Best Connections Inc. (Wire)
*This video description contains Amazon affiliate links that help Rocky X TV to continue creating new content.
Some of the links above will redirect you to Amazon. Rocky X TV will receive a small commission from purchases of linked items.
Thank you for your support! - Auta a dopravní prostředky
Great video Rocky! Remote start is a great thing to have I have on both my car and truck.
I've had one on the Wrangler for a while now and really like it. I'm glad MPC sent this out so now I have one on both project Jeeps. Thanks as always for checking out the video Chad!
Just installed this on my 06 Jeep Liberty.
Awesome video, I went with the version with a one button controller, much simpler.
Thanks a lot for your video.
Thanks for watching! Hope you enjoy getting into a warm Liberty!
Thanks for this video helped me alot, got mine installed and working perfectly :)
Awesome! Thanks for watching!
Great video! it is helpful all the steps that you made; since the disassembly of the dashboard; to the key programming; thanks to share us your videos!
PS AMAZING TRUCK!
Thank you for watching!
Might end up doing this. Thanks for the video!
Thank you for watching! If you haven't yet, make sure to subscribe to keep up on all the new videos and products, thanks again!
Great video Thank You !
Thanks for sharing. I just changed my mind.
Thanks for watching!
Been waiting on this one!
I do have one question... does it shut off automatically after a specific time or will it continue to run until you shut it off?
I think default timed shutoff is 15 minutes. I believe you can also change it to different times!
Thanks for watching Hiram!
Thank you for this video. I looked all over for something this comprehensive and was having no luck till I finally found your video. I’m installing this on a 2007 Liberty everything so far seems pretty similar. Just one quick question. My kit came with 2 One Button remotes, will programming the OEM key to remote start the vehicle affect the included remotes? Meaning, will the included remotes no longer work if I program my OEM key?
Thanks again for posting such an easy to follow instructional video on this kit!!!
been wondering about a remote start kit - like the idea of one that let me use the OEM fobs!
It is pretty nice only having the one fob. They do also have the other with a stand alone fob that has other features, but I like to keep things simple. Thanks for watching!
I wish I can make video like you keep up the good work
Thanks man! With some hard work you'll get there.
You are welcome I haven't been doing videos with my truck because the clutch is out of it and that is why I haven't been doing videos
Great video! I love those tail light covers. Can you tell me where you go them? Thanks
The covers came on the Liberty when I got it, unfortunately I have not been able to find another set anywhere. I had to refurbish these ones as they were in pretty bad shape. On the off chance you are talking about the tail lights themselves you can get those here - www.amazon.com/gp/product/B00O83HM0Q/
Hello .thak you for this video
And i want you make a video about
Remote start for dodge nitro 2008
If I can get access to one I will, thanks for watching!
How to turn off the engine after driving, the system of RS00 or INTSL is automatically reset to press 0 times, and then press the key for 3 times to start the car. Thank you!
Will this work on my 2003 Jeep Liberty?
Great video! I have a 2003 and the green wire is giving me issues. It will try to start without the 3 lock sequence. I did set it to 3 in the remote start settings (#17). I suspect that I have one of the models that needs a relay. Can you give me more info on that?
It sounds like you may need the relay. I've been digging around trying to find the info MPC gave me about adding the relay, but I can't seem to find it. If you contact MPC they will email you all the info you need, they are super nice and easy to work with. Tell them Rocky X TV sent you!
My auto start is installed but isn't working now after disconnecting the battery,
is there a way to turn it back on?
Can you do this on a 2008 jeep liberty
The system seems well intgrated into the Jeep wiring. Will this work with a 2016 Renegade Sport?
This exact unit would not, this unit is for a Jeep Liberty Renegade edition. The Jeep Renegade is a completely different vehicle, but MPC (My Push Cart) may have a system for your vehicle. I would also check the Fortin website, they are the ones that make the "brain" of the system. Thanks for watching!
Would you be able to post the wiring chart/colors and what they are for if you still happen to have it? I have a 2005 Jeep Liberty Limited that I’m doing a full install myself with a viper 5906v with all the optional accessories. But I can’t get access to all of the wiring charts that I’d like to have to make triple sure before I tap into the wires.
I'm not sure if I still have the wiring diagram that MPC provided or not. I'll have to do some digging when I get back to my office. Thanks for watching!
Rocky X TV okay, just let me know. If not I’ll see what I can try and dig up. I have an xpresskit pkumux that I’m trying to install but it doesn’t tell me the actual colors of the wires for the jeep sadly because I don’t have the “dealer” login for the page
I would appreciate it if you could tel me the way yo program the sound to go off when I click the lock on my jeep
Same model just 07
So with the purple wire that you connect to the white and purple do you have to cut it completely and wire it two the white and purple that go to the vehicle and then leave the other end cut not connected to anything is this what you meant about not being able to t connect it
That wire is just a little to small to use a T-tap on like all of the other wires. I have a butt connector on it because I accidentally broke the wire in two when removing the failed T-tap. You don't have to cut it, just splice in the purple wire. I hope that helps you out, thanks for watching!
does anyone know how these my push cart starters perform? How is the distance? I cant find any review videos
This is going to sound strange, but it works. Put your remote to your head, you will get more distance. It really works, it uses your body as an antenna!
I like you radio what kind is? And where to buy it ?
It's a great radio, it has Bluetooth, Navigation, Touchscreen, DVD and a bunch more. It is a Soundstream VRN-75HB. You can get it from Amazon or Sonic Electronix. There is also an upgraded version that has XM Radio, it's the VRN-75HXB, thanks for watching!
Hy there do you have a link where i came get copie off wiring harness wiring to install mi starte remote comtrol is mpc on jeep liberty 2006
MPC should be able to provide you with a copy of the wiring instructions. You may need your order or product number though.
Thanks for let me no about
All my wiring is connected, and programmed. Green wire tapped 3x's to a ground starts my vehicle, when I press the key fob 3x's car doesn't turn over. What am I messing up here on? Can't figure it out.
Sounds like you may have tapped into the "lock wire" instead of the "lock motor wire" I honestly can't remember the wire colors anymore. Sorry I couldn't be of much help, but you could try contacting MPC tech, they are super helpful and really nice!
The MPC works on 2002 to 2004 liberty models?
I'm not 100% sure, but from looking at the My Push Cart website it appears not. I'm really surprised, I thought this kit would work for the older models. Sorry it doesn't look like it will work for your application, but thanks for checking out the video though.
Thanks for the great video!! But I cant tell which tan/blue or tan/violet door lock wire you plugged into. It looks to be in the bundle of wires close to the wires for the brake peddle. Could you give me a little direction on how to locate it? I have found 4 tan/blue wires...
If I remember correctly you can remove the drivers side "kick Panel" (right next to your left foot if setting in the vehicle) By removing this panel you can get better access to the wires. I believe the reason for the 4 lock motor wires is because there are 4 doors and they use the same wire color code for them all. I hope this info helps, thanks for watching!
That makes sense...Once I had everything hooked up (connected to the wire I thought it was) it worked, however if you hit any of the locks, key fobs, or any of the door locks 3 times the car would start...I have the Limited but I wouldn't think that would make the difference...so im searching from the door into the car...
I had never heard of this issue, but I just went out and tried mine and it does it as well. I can press the driver or passenger lock button inside the Liberty 3 times and it will start. This must just be a trade-off for being able to use the oem key fob. Or I tapped into the wrong wire as well.
Was this problem ever fixed if so how?
Not sure, at least I haven't found a fix, but then again I haven't really looked. It's not that much of an issue for me though.
Not a comment, it's a question.
I purchased a mypushcart remote start, it doesn't come with remote, I don't have the factory car key it's a copy. What kind of remote can I buy to work with mypushcar? Please
As far as getting a remote to work with the system you have... I'm not sure. They do have kits that have their own remotes, you may be able to contact MPC support and see if they can program one of those to fit your situation. Thanks for watching!
Rocky X TV Thank you very much my friend
Hey buddy question here, what kind of tape is the one you used to wrap the wires??
It has a few different names, wire loom tape, cloth shielding tape, heat tape, etc. The big name brand of it is Tesa Tape, I use the generic Amazon brand cause Tesa tape is around 5$ per roll! I got 10 rolls for 15$, but I just looked so I could give you a link and they don't sell the generic Amazon brand anymore. Not sure where I'm going to get it now.
Whoa, that a shame. i Hope amazon put the generic for sell again soon, that tape give a fine factory looking to the wire loom... Anyway thanks a lot. great video by the way!
I really hope they do, it does make everything look really nice and clean. I've even went through and re-wrapped some of the factory harnesses with it cause it looks so much better.
Does it Sheila the wires from the heat? Have you tried it in the engine bay? ive been trying to figure out what to do with those wries that the have laying across the valve covers. you know with the little plastic part thats probably broken off the bolt
Yep, it says shields wires from heat. I don't know how much heat, I'll have to look at some I put under the hood of the JK a while back and see if it held up, I forgot I put some on the other Jeep.
The grab handle screws are a 5.5mm
I know I have a 5.5 around here somewhere, maybe just a wrench though... Thanks for the info!
i have 2004 jeep liberty is same end whate kind remote
Unfortunately from what I am seeing, this kit is only good for 2005-2007 Liberty's. It would be worth contacting My Push Cart to find out for sure though because they are adding new systems all the time. Sorry I couldn't be of more help, thanks for watching though!
I looked into something like this before. They guy installing it said that with the one using the OEM controller that if you were to hit the locking switch on the door (in his case twice) it either tried to start again or shut it down (cant remember its been a while). Is that the case with this?
Just went out and tried it, wouldn't start with the lock switch inside. It is easy to confuse the "lock motor wire" with the "lock wire". I think the system would operate with either wire, but using just the "lock wire" would most likely cause that issue. Thanks for checking out the video Alex!
I heard that happens with an early 02-04 model.
That could be true with the 02-04. That also might be why MPC doesn't list this kit for those years, they list it from 05-07. Thanks for watching and pointing that out!
That motor lock wire works properly 100% of the time - as long as you use a relay between the start activation wire of the remote start and the lock motor wire.
You are correct, I had to go back and add the relay, no big deal. Without the relay it would sometimes start with just one or two presses of the lock button. The instructions from MPC did warn me about that though.
the links no longer work did they discontinue this for 03-7 liberty's?
hom3 gr0wn just do a general search on google and you will find it, I found it on Newegg.com $149
And on my push cart which is the company that is on this video, MPC for 149 as well
How to restart the RS-00 power? Turn off the key then press 3 times lock to start the engine.
When programming you should only have to press lock once. If you are asking how to activate the remote start after installation, then yes, press lock 3 times in a row to start the vehicle.
Oh, okay. I see what you are talking about now. This is a known issue that happens on some Liberty's. You have to add a relay, do you still have the instructions from your kit? It should have a short section in there about adding a relay to fix this, then you will have to hit lock 3 times every time and not have it start with one press sometimes.
All you need is a standard Bosch style relay, 4 or 5 pin will work. You will need to wire the relay like so, *Pin 87* = Ground, *Pin 86* = Ground, *Pin 85* = Lock Motor Wire on the Jeep, *Pin 30* = Lock Motor Wire on the Remote Starter (Green wire in the small red 3 pin plug) This should fix your issue.
How do you test the lock motor switch with a test light
That I am not sure about. With a test light the response may be to slow. The lock motor pulse is pretty fast and may not even show up on a test light.
My 05 dosnt have the same color as yours
That is strange... Have you tried to contact MPC customer support? They are very nice and really helpful. Sorry I couldn't really answer your question.
Mine says it’s tan and dk blue
what color is the wire that connects the green
18:44 of the video will answer your question, thanks for watching!
if I can see it only that I do not understand what color is
The green wire from the remote start goes to a tan and purple wire that can be found in the foot-well. It will be in the bundle of wires coming into the Jeep from the door. You can trace this wire up to a higher location as to make it easier to tap into. I hope this helps you out, thanks again!
you are the best , thanks for everything
100% don't need to take out all the dash, bottom of column is plenty.
anyone looking for this kit here is the part number on amazon B-4749-305