AM32's NEW configurator settings 100% Explained: RIP BLHeli_32 😢
Vložit
- čas přidán 6. 07. 2024
- New configurator: am32.ca/
ESC Tuning guides: / 619985
Betaflight 4.5 Tuning Guides: / 435076
Timestamps:
0:00 Oh dear...
0:26 Intro
1:05 Connecting to AM32
1:57 New AM32 Configurator
3:05 Flashing Firmware
6:37 AM32 Tuning Guide
7:10 Applying and backing up settings
10:07 Protocol
10:45 Stuck Rotor, Stall Protection
11:50 Variable and Complementary PWM
13:13 Timing and Startup Power
14:54 Motor KV, Motor Poles, Beeper Volume
17:00 PWM Frequency
18:46 Limits
20:45 Sinusoidal Startup (for Crawlers)
21:21 Brake on stop (for Wings)
23:08 Servo settings (for RC cars and Wings without FC)
24:05 Coming up in future videos - Věda a technologie
I legit felt bad for you, knowing how much work you put into that BLHELI_32 video just for them to bail on us the day after.
I thought same.... right after he dropped that super in depth video. Murder yijrs was good too and then bl heli 32 just chucked the duces
too real murders
Brilliant opening, Chris. I can imagine.
Tell me about it 🤣
@@ChrisRosser Must be sorta how I felt when my local 'puter shop stopped stocking C64 titles back in the day. Goodbye, my sweet, sweet tech. . .
You should make a video checking out ESCape32
Excellent work Chris. Thank you for the very detailed information and opinions. Much appreciated.
excellent vid!! very detailed to include the roasting!! thanks!
Great Chris! as usual :)
Thank you so much for the video Chris,
RIP BLHeli_32
Would love to see a remake of your 7 month old video 55A ESC Testing, BL32 vs BLS vs BJ vs AM32. Basically at minimum the chapter on responsiveness. With a second or the same Skystars KM55A ESC but with the firmware ESCape32 (you can change firmware allegedly back and forth.). The reason I ask for this. There is a video comparing motor revving between BL32 and ESCape32. And it is amazing. ESCape32 could possibly be the best choice for 3D mode. I also received this Skystars ESC 2 days ago and will try to try ESCape32 next month. But I don't have a measuring lab at the moment to make an objective comparison to show it...
ESCape 32 is for wheeled vehicles.
@@cinemoriahFPV You're right. It was developed specifically for vehicles and excavators because the developer was dissatisfied with the responsiveness of BL32 and BLS. You can see this explanation in the comments of the video in question. However, the developer and FPV University (Pawel) also say this, it can also be used for quadcopters. And they claim that quadcopter pilots have apparently already told the developer and Pawel that they think it's better than AM32. Check the FPV University video about ESCape32. As far as I understand, it's an open source project. It could be that 2 forks will develop from this, one firmware that further develops the vehicle area and one that further develops the quadcopter area. If that will even be necessary... I see you have Cine in your nickname. Did you know that the PID controller does its job better when the motor reacts more quickly? That means ESCape32 could also be better for Cinema FPV than AM32. If it is realky true that ESCape32 is faster...
@@cinemoriahFPVESCape32 is general purpose ESC firmware. Many happy drone pilots use it quite successfully. Personally, I fly my iFlight BLITZ 4in1 ESC with it, and it works very well.
@@Sugalime3D_FPVPlease note that most Skystars ESCs have PB4 as input which is not supported by ESCape32 in case of the AT32F421 and GD32E230 chips and will require a hardware hack.
@@escape32-org Ah ok. You already wrote something like that to me in your Motorstartup video. But it's good that you're writing it here too, for the readers. I have a Skystars AM32 KM55A Mini that I'm going to flash to ESCape32 in the near future. As far as I can see, it has STM32F051 and PB4. So I assume it doesn't need a hardware hack. If not, that wouldn't be a problem because I wanted to build an AM32 quad for comparison anyway. But it's good that you mentioned it normally! Because if I really do switch everything to ESCape32 in the future, I'll have to be careful what I buy. Unfortunately, the product descriptions often don't say in the specs exactly which chipset is used. If I find that I like ESCape32 better for 3D mode than others, I will definitely register everywhere to report bugs and make suggestions... How about, for example, writing this hardware hack information as an intro to the target compatibility list. You could also list all known ESCs that require a hardware hack, of course it should be very clear and visible that they require it...
Thanks!
Been waiting on this 😊
Can't wait for the 2nd video.
Thanks Chris now when I get a am32 esc I will be able to set it up 👍👍👍👍
Hello Darkness, My Old Friend. So apropos. Thanks for doing this.
Here is the video some people need.😊
Thank you... Great video... L8r to all and to all: have a great day...
❤thanks Chris, 'GET IN THERE MY COUNTRYMAM FRIEND"
Active braking IS very helpful stopping the prop on a wing for landing, saves props.
Active braking is different to (prop) brake... active braking allows the ESC to somewhat force the motor to slow down if you lower (not cut) the throttle... whereas (prop) will stop the motor when you cut the throttle. You can have the brake enabled, and not have active braking. That's why Chris specially said you want brake enabled on wings, but not quads ;)
@@pfeerick Thanks. I was wondering about that.
I'm in need of a new esc, since my last one burnt out. Do you have any recomendations for 6s?
that new configurator do be looking sweet imo 😏
I think for emergency disarms brake on stop is actually really useful. If I'm about to crash into a person and know that on disarm the props stop spinning just a few ms later, this is still enough time not to cause any cuts with their inertia. So I'm having this on on all my quads actually.
@chra your current limit slider has a bad setting you need to slide the slider back to 0 and them back to full to fix it. changing versions some times corrupts. the settings
As soon as quadmula gets frames in stock im doing a new 5 in and 3.5 build and gonna need this info for both builds
Thought that opening was a joke! Then I saw it wasn't! Now I feel bad for laughing. 😅
I compiled a AM32 firmware for my own test 4 in 1 esc, but I set DEAD TIME incorrectly, thank to DC protector it just goes really hot without blowing up. How should tune the DEAD TIME without really got my ESC DEAD?
Excellent video, Chris! Thanks a bunch for all the info! 😃
But yeah, BLHeli32 going away was more than unexpected... 😕
Anyway, stay safe there with your family! 🖖😊
Few typos on that flash firmware warnings bit
Hello Chris I have started racing at one of my local chapters. Long story short I have a goal to reach to top 200 or maybee 100 in the world at next years IO . I am a huge advocate of your frames and motors including this ESC even before this bl heli32 ordeal. My whole fleet is AOS. That being said i am going to proove to the world that AOS has a place in racing. Thank you for what you have done for us.
Take care !
Don't fly aos if u wanna b fasssst
@@theringoffire3228 lols yup.. stick to frames and tuning for racing by racers..
He just wants free stuff from sponsors 😂
@@robert-gille 😂 he’ll need to do a lot better than top 100 to get sponsors..
Yee of little faith
Active braking is super benificial with wings or belly lander plames...having that prop stop spinning will help u break alot less props
Mehh, if the prop blade points down and you have a hard brake on it, snap! I just let it mill and if the blade points down usually it turns aside keeping the prop in one piece.
Only beneficial for folding props.
Is there an easy way to flash am32 to blheli-32 esc?
No and I do not advise attempting this. If you want to try out AM32 then I recommend buying an AM32 ESC.
@@ChrisRosser I think sendorm actually asked about the reverse...
AFAIK it's essentially impossible to flash an AM32 ESC to BLHeli32 (even if the ESC originally had BLHeli32 on it) - no-one's managed to "hack" BLHeli32's bootloader.
@@Vousie Bardwell has just published video showing how to 😀
@@stevietee10 I meant if you have an AM32 ESC and you want to put BLHeli32 on it - that's basically impossible. But the reverse is quite possible (just complicated) as Bardwell showed.
@@Vousie My bad, didn't read your comment carefully enough🤦♂
am32不知道飞3D有没有BLHELI 32好,有没有朋友试过?或者飞过的视频学习。
This configurator looks like 20y newer than Bl configurator from the nineties 😄
Like for the lols
I'll just leave this here: czcams.com/video/zIUSYx_Ohqo/video.html - just carefully look through the comparison and see how sluggish BLHeli_32 looks comparing to ESCape32. Literally changing motor spin direction on a dime.
But can we believe it?
Your MINT ! BL will be back when the conflict in the east ends .
just use fettec