Axial SCX24 C10 - 5 modifications
Vložit
- čas přidán 29. 12. 2020
- In this quick video I'm presenting 5 modifications that I made to my Axial SCX24 with the Chevrolet C10 body. And there is a bonus info about tools tat I use at the end so do not close the video too early :-)
---
Car:
- Axial SCX24 C10: www.axialracing.com/products/a...
Weights for the wheels:
- pl.aliexpress.com/item/400110...
LED controller:
- AJRC 3RD: pl.aliexpress.com/item/400118...
PM600 Military Grease:
- www.sram.com/en/rockshox/mode...
Tools Jakemy JM-8150:
- www.jakemy.com/product/jm-8150/
---
Music:
- The track Whatdafunk by Audionautix is published under Creative Commons License - Attribution 4.0 International (CC BY 4.0) creativecommons.org/licenses/...
Author: audionautix.com/
Camera:
- Xiaomi Mi Note 10 Lite - Auta a dopravní prostředky
Given that this had a breakdown to apply the grease, this might be the best cheap SCX 24 mods breakdown.
I used the stock lights for headlights. It works fine with no need to buy new ones
I’m new to the hobby and been trying to figure out what kind of tools I will need so I really appreciate your recommendation and just ordered a set from Walmart for like $15. Thank you sir!
Get a high quality Allen wrench set
very good video quality !!!
Thanks
Good video! That modification with the bumper and lights is cool. I like the connector you attached. Great idea! Would like to see a vid on the rc specific tools 👍🏻thanks for the video!
Thank you for sharing ! Like to see more on the tools, how's the quality of them
This is awesome ! I have been thinking of getting one for an indoor track. Nice video subscribed and liked ! I also recently have started posting rc content and its so much fun !!!
Thanks for the video. 😎👍. Dzieki
Thanks for sharing with us!!
Nice modification video. 👍
Impressive mods my friend. Subscribing for more 🤘
I moved the upper shock mount down to the frame ,jasked it up a bit 2 😃👊👍✌️🦅🦼🇺🇸
Thanks for The video! 👍🏻
I have the same rc crawler thats soo good
Very cool!
How do I take the lights out
Does the tool set have the . 05 and the 1.5 hex key drivers? Those two are the most important for the scx24.
Hex 0.5 and 0.05 - no
Hex 1.5 - yes
The smallest Hex is 0.9.
I want more mods for the silver truck!!!
Nice
Where did you get the grey one I can only find it in mint green
I bought it here: rc-team.pl/auta-zdalnie-sterowane/139696-scx24-chevrolet-c10-1967-124-4wd-rtr-srebrny.html
However I'm not sure if they deliver products outside of Poland.
Can you run throes heavier brass hexes and wheel weights?
I'm not sure if I get it, but if you are asking about these 7g weights than I have no problems with them.
Next week I'm gonna upload a new video about a servo in this car and hopefully this will shed more light on this topic :-)
can you use a Dremel to cut the corners of the body when you remove the bumper?
Well, yes I could, but it's not needed as lexan is very easy to cut with scissors. Besides, if you are using a fast speed dremel it can melt the lexan, so you need to use a dremel with an adjustable speed.
@@pandubek387 thanks! I don’t have scissors that small so I was just wondering
How tall are the stock tires?
49mm (1.93")
You gotta check out my moa fcx24!!! Eating scx24 for breakfast
How are the tools holding up almost a year later?
So far, the entire toolkit has been working great. Nothing is broken, everything looks like new. The only drawback that bothers me is the lack of a Phillips/cross tip in size 3.0. I had to borrow it from my other toolset, because I use it a lot.
Did ya ever make that tool set review? 😯🤷♂️
Hi. I didn't. There was not much interest in this topic.
On front lights no need to drill and take off stickers the light shines right through sticker
really if so how do i mount the lights?
@@asapplayz6912 there is little clips behind light sticker they go into and the light shines right through the sticker
ok what size lights can fit in there?
@@mikesned4201 also does light still illuminate like does it still create more light or just like a light to be seen
@@asapplayz6912 The lights that it comes with fit right in there the lights that are from the bumper and it doesn’t make them brighter it just looks more scale realistic
narzędzia fajne , ale brak podstawowego klucza do Axiala SCX24 czyli HEX 1,27 ...
Do don't trim body if u have a c10 just raise the body so the tires don't hit
But that would increase the center of gravity, and I wanted to avoid it.
Add weight to the body before rotational weight
This is absolutely right and I did it in my other SCX24 - czcams.com/video/rzyu_0x474M/video.html
When I was filming this video I was still waiting for the parts I had ordered. At the moment I also added diff covers - 9g rear, 14g front.
Pan Düben a to Polski kanal
Dziękują
, pan.
Chevy sedan body? Looks like a pick up truck to me.
I was using my few day ago brand new .
And al of useden it starting making a noise by the motor using few minutes playing with it.
Who knows what's wrong
*K10
Order from Aliexpress and support the CCP while you wait 2 months to get it.
The author of this video is based in Poland. As much as I appreciate your sentiment, aftermarket parts for SCX24 are hard to come by in Europe and the shipping rates from the states are borderline extortionate.
Stop using scissors use a razor blade score and fold...... your welcome I promise you will never user crappy scissors again