damn, (sorry for the language) but i said what i said, i'm from philippines, and most people here only own a small bike, im just surprised that even in your place you got small bike. it's just new to me because i'm used to watch YT channels only with big bikes. you got my sub. so inspiring.
🇸🇬🇲🇾 fan here, cheers for sharing. Your success with your oil cooler significantly bringing down oil temps really tempting me to go get this MVR1 Oil Cooler that's designed specifically for my Yamaha FZ150i (aka Vixion in 🇮🇩) The bike engine's still stock, but i do use it for 6-12hr hard touring rides up West Malaysia. I've already installed an oversized radiator for it, adding an oil cooler's kinda overkill but it does make me feel good to know my ride's practically bulletproof for handling engine heat issues ;D
Curious to hear how that story develops. With the higher temps you get in fresh New Zealand, I can see why so many Groms blow once their owners fit big bore kits. You're certainly doing it right with the dyno tune and monitoring the engine temps. Best of luck.
Yeah I know of two people who did 143 kits - only the barrel and piston. No head work. Maybe a high lift cam and that's it. They both ran reflashed ECU's and ended up with melted pistons. I was deadset on doing the reflashed ECU route till my friend Kass that helped build the engine set me straight. Glad the tuning was done properly. I checked the plug the other day and it's looking great!
Great video. If possible, I'd be tempted to fabricate a hanger to mount the cooler below the cylinder. This will work well with the standard oil pump as less pressure will be needed. Great looking kit, I've shat an FL125 Address (same bike). Hopefully just a tweaked valve, but I can't get to the bike until my covid has cleared up. Loved the video!
Thanks for the comment! Just subscribed to your channel. Will take a look through the videos soon. I have considered a lower mount for the cooler but also do enjoy the ground clearance it has at present. We’ll see how it goes with more riding time!
I don’t even know that you can buy a “vin waist” (motorcycle taxi) from Thailand, i heard that if you want one you have to “deal with” some local’s vin.
Haha I found a shop in Bangkok that retails them. Only cost 500 baht I believe. I got English printed on the back instead of Thai - so I don't have the location or anything of where the vest is meant to be used. I also don't have a motorcycle taxi license on the velcro patches of course.
Hahaha no one in New Zealand knows what the vest is for or why. Everyone just thinks I'm a bit weird. But I love it! Thanks mate. I'll be in Thailand again soon. What province are you from?
@@SmallBikeStuff I'm living in Surat Thani within the town, I'm working in a shop named Tropical Cannabis Culture near the night ferries pier to Koh Toa. If you're planing to visit Koh Toa island I would love to meet you if there are chances and maybe talk with you about the your views on the Thailand motorcycle sub culture or scenes. 🙏🏻
@@Aamon-Synxt we are riding underbone motorcycles motorcycles from Kuala Lumpur to Southern Thailand. I’ll be stopping in Betong, Songkhla and Nakhon Si Thammarat then we ride through Tai Rom Yen national park to Krabi. So the closest I will be to you is 1 night in NST. Come to visit if you can!
@@SmallBikeStuff Ah sadly I may not be able to but I will surely hope one day I can get a chance to meet you in person! Keep riding on! I wish you have a safe and nice trip in Thailand🙏🏻
@@Aamon-Synxt if you are on Facebook or Instagram - search for Small Bike Stuff, follow me and send a message. I’ll let you know the date I’m in Nakhon Si Thammarat. We would only be 100KM away from you. I’ll pay for your petrol!
I've got a spare side cover now thanks to Tom on a budget. Should I give it a go and drill it like the guys at the end of the video?
Do it! 💪😎
Good luck. 😎
@@tomonabudget I need to a brave fella to do it. Will research more before I give it a go!
I’d be interested to know the process of how you DIY the oil cooler ports on the stock clutch cover
damn, (sorry for the language) but i said what i said, i'm from philippines, and most people here only own a small bike, im just surprised that even in your place you got small bike. it's just new to me because i'm used to watch YT channels only with big bikes. you got my sub. so inspiring.
Thanks mate! I am glad you like the videos.
🇸🇬🇲🇾 fan here, cheers for sharing.
Your success with your oil cooler significantly bringing down oil temps really tempting me to go get this MVR1 Oil Cooler that's designed specifically for my Yamaha FZ150i (aka Vixion in 🇮🇩)
The bike engine's still stock, but i do use it for 6-12hr hard touring rides up West Malaysia. I've already installed an oversized radiator for it, adding an oil cooler's kinda overkill but it does make me feel good to know my ride's practically bulletproof for handling engine heat issues ;D
YES! Great idea. The oil cooler really helps, and if it's specifically designed for your bike thats even better.
I have this motorcycle too, mine is 2013 carburator version lol😂
I am glad you also like it
Very cool! What country do you live in?
@@SmallBikeStuff country that most small bikes user in the world, indonesia
Curious to hear how that story develops.
With the higher temps you get in fresh New Zealand, I can see why so many Groms blow once their owners fit big bore kits. You're certainly doing it right with the dyno tune and monitoring the engine temps.
Best of luck.
Yeah I know of two people who did 143 kits - only the barrel and piston. No head work. Maybe a high lift cam and that's it. They both ran reflashed ECU's and ended up with melted pistons. I was deadset on doing the reflashed ECU route till my friend Kass that helped build the engine set me straight. Glad the tuning was done properly. I checked the plug the other day and it's looking great!
Good to know, 8m not even goi g to head down this road now havi g heard this. A stupidly loud exhaust is plenty of fun for me! 🙃😎
Great video. If possible, I'd be tempted to fabricate a hanger to mount the cooler below the cylinder. This will work well with the standard oil pump as less pressure will be needed. Great looking kit, I've shat an FL125 Address (same bike). Hopefully just a tweaked valve, but I can't get to the bike until my covid has cleared up. Loved the video!
Thanks for the comment! Just subscribed to your channel. Will take a look through the videos soon. I have considered a lower mount for the cooler but also do enjoy the ground clearance it has at present. We’ll see how it goes with more riding time!
I don’t even know that you can buy a “vin waist” (motorcycle taxi) from Thailand, i heard that if you want one you have to “deal with” some local’s vin.
Haha I found a shop in Bangkok that retails them. Only cost 500 baht I believe. I got English printed on the back instead of Thai - so I don't have the location or anything of where the vest is meant to be used. I also don't have a motorcycle taxi license on the velcro patches of course.
man I got to respect that aesthetic of the "Thai Win motorcycle"😂
And thank you for appreciate such sub culture from my country
Hahaha no one in New Zealand knows what the vest is for or why. Everyone just thinks I'm a bit weird. But I love it! Thanks mate. I'll be in Thailand again soon. What province are you from?
@@SmallBikeStuff I'm living in Surat Thani within the town, I'm working in a shop named Tropical Cannabis Culture near the night ferries pier to Koh Toa. If you're planing to visit Koh Toa island I would love to meet you if there are chances and maybe talk with you about the your views on the Thailand motorcycle sub culture or scenes. 🙏🏻
@@Aamon-Synxt we are riding underbone motorcycles motorcycles from Kuala Lumpur to Southern Thailand. I’ll be stopping in Betong, Songkhla and Nakhon Si Thammarat then we ride through Tai Rom Yen national park to Krabi. So the closest I will be to you is 1 night in NST. Come to visit if you can!
@@SmallBikeStuff Ah sadly I may not be able to but I will surely hope one day I can get a chance to meet you in person!
Keep riding on! I wish you have a safe and nice trip in Thailand🙏🏻
@@Aamon-Synxt if you are on Facebook or Instagram - search for Small Bike Stuff, follow me and send a message. I’ll let you know the date I’m in Nakhon Si Thammarat. We would only be 100KM away from you. I’ll pay for your petrol!
What's with the numbered jacket? Looks like Guantanamo Bay
Thai motorcycle taxi vest. You'll see them all around Bangkok and other cities over there.
Man i love your videos... I'm from Philippines and small bikes are common here.. I have honda wave to 100cc..
Awesome! I love all Honda Waves.
This a good idea. Thanks for sharing this.
Thanks for watching - glad it was useful.
A very interesting engine you got back there .. is that a satria engine ?
Thats a Suzuki FX125 engine. Thanks for watching!
What tools/apps used for showing engine status informations?
Hi this is using a ECU Shop Fullstand Next ECU and the app that goes with it.
What motorcycle is that??
Honda Wave
@@SmallBikeStuff i have honda wave 110cx, but it deferent to yours
I like your uniform555 ไปปากซอย เท่าไหร่ครับ
คุณอยากไปที่ไหน? 20฿ 🙏🙏
ฝรั่งขี่เวฟ
I love the Honda Wave :)