⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: czcams.com/users/AutoRepairGuys
Awesome video you guys have taught me so much and saved me probably thousands!!!!! I’ve watched multiple videos from you and have done the brakes, an alternator, oil changes, belts, spark plugs, and most likely my solenoid soon. Thanks to your videos I am sure I will be able to knock out any job!
Real good video easy to learn from your videos. I just subscribed. My 2014 Hyundai Tucson shifting lever won't unlock unless I use a small flat head screw driver to push easily down into a small slot by the shifting lever to unlock it. I had to remove a small plastic cover about 10mm square to push the screw driver down in about 12-14mm and gently push to unlock the shifting lever. My wife took the car to the dealer to find out what the problem is, they told her the transmission solenoid was bad, they told her it would cost around $600.00 to fix it. $93.00 for the solenoid the rest was for fluid, gasket and labor. After watching your video I see why it is around $600.00.
Great videos, keep them coming! Very detailed. Quick question maybe you can help me with. I have a 2005 Hyundai Tucson GL 2.0L and I need to replace the TCC Solenoid but can find any location anywhere on which one of these solenoids it is. My shop manuals are just saying under the air cleaner, lol. $2,000/month and that's what I get lol. Using your video as a reference could you tell me starting from top, the location of this solenoid? They all look pretty much the same. Thank you in advance.
I have 2009 sonata 2.4L automatic, it rough shift from 3rd to 2nd gear on cold start. It doesn't do this if I change gears manually or in automatic when once it warms up. Would you say it's the solenoid or the transmission speed sensor ?
I have a new issue with my 2010 Hyundai Elantra 2.0l sedan while driving the car jerks a little bit when shifting gear around 40 to 45 mph. What could be the issue?
Because I had to remove this part in order to access the Input output speed sensor and replace the sensor. However, on the system diagnostic, it’s still showing Gear 4 ratio incorrect…
Please my Hyundai getz 2008 gear has issues it goes reverse well but forcefully jerking trying to move forward. The fixing man removed the gearbox and installed another one and after then i started expirincing this issues. I noticed that there is a black cover carry a single wire which can be socketed in the car but the installed gear doesn't have a wire in the black cover but the car has the wire so there no place to sucket it. Please help what can likely cause this
Hi sir . I have one question for you . Have a problem with Santa Fe 2012 model . Engine start with ideal RPM is very good . Bet when I put in gear . Engine stalling and shut off . What the problem is have ..? Can you explain me
I understand making multiple videos for viewer content and different information aspects, but having to click on different links and other videos is a pain in the neck. Your descriptions say you're going to go into detail about certain aspects of the job in question or you're going to explain this and that "coming up" but you don't explain anything very well at all and then say to click on another video in order to actually figure out the steps you neglect to include. One video after the next... 45 minutes of you talking just to be 5 minutes into the procedure. If a picture is worth a thousand words, I'd say your videos are worth about 999 words.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: czcams.com/users/AutoRepairGuys
Awesome video you guys have taught me so much and saved me probably thousands!!!!! I’ve watched multiple videos from you and have done the brakes, an alternator, oil changes, belts, spark plugs, and most likely my solenoid soon. Thanks to your videos I am sure I will be able to knock out any job!
Real good video easy to learn from your videos. I just subscribed.
My 2014 Hyundai Tucson shifting lever won't unlock unless I use a small flat head screw driver to push easily down into a small slot by the shifting lever to unlock it. I had to remove a small plastic cover about 10mm square to push the screw driver down in about 12-14mm and gently push to unlock the shifting lever. My wife took the car to the dealer to find out what the problem is, they told her the transmission solenoid was bad, they told her it would cost around $600.00 to fix it. $93.00 for the solenoid the rest was for fluid, gasket and labor. After watching your video I see why it is around $600.00.
perfect tutorial, guys. thank you much, from Arizona
me encanta. me han ayudado mucho a conocer más aún mi vehículo sonata 2012. saludos desde Chile
NO HABLA ESPANOL
Nice work to him and his servant 👍
Great videos, keep them coming! Very detailed. Quick question maybe you can help me with. I have a 2005 Hyundai Tucson GL 2.0L and I need to replace the TCC Solenoid but can find any location anywhere on which one of these solenoids it is. My shop manuals are just saying under the air cleaner, lol. $2,000/month and that's what I get lol. Using your video as a reference could you tell me starting from top, the location of this solenoid? They all look pretty much the same. Thank you in advance.
Love the videos, keep them coming! Saved me tons of money already. Thanks
I have 2009 sonata 2.4L automatic, it rough shift from 3rd to 2nd gear on cold start. It doesn't do this if I change gears manually or in automatic when once it warms up. Would you say it's the solenoid or the transmission speed sensor ?
Have you figured out?
You asked one year ago.
I have the same problem, doesn’t shift from 1 to 2. But no problem driving manual mode
I have a new issue with my 2010 Hyundai Elantra 2.0l sedan while driving the car jerks a little bit when shifting gear around 40 to 45 mph. What could be the issue?
Your video shows removal of transmission solenoid on a 2009 and up. My request was how to remove a transmission solenoid on a 2002 Hyundai Elantra GT.
Why would you have to replace the silinoids?. What are the symptoms?
Because I had to remove this part in order to access the Input output speed sensor and replace the sensor. However, on the system diagnostic, it’s still showing Gear 4 ratio incorrect…
What is the part number on this part?
Please my Hyundai getz 2008 gear has issues it goes reverse well but forcefully jerking trying to move forward. The fixing man removed the gearbox and installed another one and after then i started expirincing this issues. I noticed that there is a black cover carry a single wire which can be socketed in the car but the installed gear doesn't have a wire in the black cover but the car has the wire so there no place to sucket it. Please help what can likely cause this
Hi , i wanna see how to replace TCC solenoid on the Hyundai i30 2011 plz
Hi would you please tell me the part number of this transaxel? Need to know over F4A51 HYUNDAI SANTA FE 2007 TRANSAXEL. ty.
My gear shifts well but stuck on 1 gear q'd does not run fast just on gear 1
Can you tell me please. What is the part # for solenoid B?
Where's your shop bro I'll take it to you??
Hi sir . I have one question for you .
Have a problem with Santa Fe 2012 model . Engine start with ideal RPM is very good . Bet when I put in gear . Engine stalling and shut off .
What the problem is have ..? Can you explain me
Nice!
Wait, so is this basically the same transmission solenoid body as a 2014 Hyundai Elantra? 🤔
I have a 2015 Hyundai Elantra that shuts down when put in reverse and I hit the gas. Do you think that my solenoid may be bad ?
Where is the intake oil control valve for the 2015 Hyundai sonata sport 2.4l engine location
Good info ok
But mine Only does it if I Start the car up and go if I let it warm up for maybe a minute At the minimum, it works fine.... what do i do??
I understand making multiple videos for viewer content and different information aspects, but having to click on different links and other videos is a pain in the neck. Your descriptions say you're going to go into detail about certain aspects of the job in question or you're going to explain this and that "coming up" but you don't explain anything very well at all and then say to click on another video in order to actually figure out the steps you neglect to include. One video after the next... 45 minutes of you talking just to be 5 minutes into the procedure.
If a picture is worth a thousand words, I'd say your videos are worth about 999 words.