2024 H-D Subwoofer Install | Harley-Davidson Audio® Powered by Rockford Fosgate®
Vložit
- čas přidán 26. 08. 2024
- Introducing the new Harley-Davidson Powered by Rockford Fosgate subwoofer system. This is true bass performance for your 2023.5 or newer Road Glide, Street Glide, and select CVO models equipped with the Skyline Infotainment system. This video covers the step-by-step installation for a dual subwoofer system.
00:16 Introduction
01:34 Getting Started
02:08 Bulkhead Drilling Template
02:43 Remove Existing Bulkhead
03:03 Grille Hole Template
04:31 Drainage Hole Location
04:37 Subwoofer Grille Mounting
05:12 Prepping the Secondary Amplifier
06:27 Mounting the Amplifier Bulkhead
06:52 Saddlebag Harness Layout
07:40 Install New Capacity Labels
07:45 Remove Clutch Side Bulkhead
08:32 Grille Vent Hole Template
09:36 Drainage Hole Location
10:36 Install New Capacity Labels
10:41 Secondary Amplifier Harness
11:58 Secondary Harness Layout
14:30 6-Pin to 8-Pin Harness Pinout
15:49 Sub to 6-Pin Audio Pinout
16:45 Battery Connections
17:44 Saddlebag Reinstall
18:07 Subwoofer Installation
18:19 Subwoofer Activation
18:24 More Info
#harleydavidson #motorcycleaudio #subwoofers
For information on the 2024 Harley-Davidson Audio Powered by Rockford Fosgate subwoofer system, visit the Rockford Fosgate product page below. This product is exclusively sold by Harley-Davidson. Product Details: rockfordfosgate.com/products/system/factory-installed-systems/2024-h-d-saddlebag-subwoofers/
Cool DIY vid as always, Eric👍🆙️ 🍻cheers
Just purchased a 2024 RoadGlide CVO and had the dealer install subs on both sides before I took delivery. I love the tunes, but the rattling is horrible. Why? What recommendation do you have to deafening the ratting in the bags?
Thanks,
Mike
As much as I love my tunes, I’d still like to keep my bag’s for storage but that does sound good clean and easy install 👌🏾
@@SouthernBoyzRyde That’s the beauty, they simply remove so you can retain your storage space. You can also just purchase 1 sub + the amp kit by and keep the other bad as your full-time storage.
Will the Rockford Fosgate Stage III Saddlebag Speakers fit with the subwoofers?
@@kevinc7910 Great question! YES the Stage III saddlebag speakers are compatible with the subwoofer system (no clearance issues).
Can you use the subs without the speaker lid speakers?
@@kevinc7910 Yes, absolutely. You can use the front fairing with the subwoofer system.
Right on, I’m going for it then! As long as my daughter can hear more of the deep notes and tones from Taylor Swift, we are golden :-).
Are you planning on coming out with any kits for Indian motorcycles?
We don't have anything for Indian Motorcycles at this time.
So my Harley dealer enabled right subwoofer but when I go into speaker configuration the right subwoofer is greyed out. They tell me it's how it's should be. I'm little bit not buying this that is greyed out also how do i tell that they enabled the secondary amplifier in the saddlebag?
@@bartii8311 To confirm, you had one subwoofer (right side) installed with the Secondary amplifier, correct? The secondary amplifier is required for any sub to operate because it uses 2-channels bridged to each sub.
@@rockfordfosgate that is correct. I had one subwoofer (right side) installed with the secondary amplifier. Only reason I brought that up is when my Harley dealer ran digital tech secondary amplifier remains disabled.
Also why is my subwoofer (right) grayed out under speaker configuration? My stage 2 front and stage 3 lid speakers are not grayed out so I'm little bit confused that this subwoofer configuration is working properly just because it's grayed out. Even looking at your older videos when you guys did installs on stage 2 front or stage 3 lids I can tell from those videos subwoofers were lid up on your install bike. So what is wrong with mine? What did the dealer do wrong? Or what can I do on my end to get this fix? Cause my dealer is very confused about this and they don't have a answer why my subwoofer is grayed out.
@@bartii8311 While I'm not sure why the subwoofer is grayed out, it's possible there are different versions between Digital Tech and the Skyline OS configuration. Do you happen to know the software version loaded? You should be at least 1,300 or higher. By chance are you here at Sturgis? We're performing Skyline OS software updates at Black Hills H-D all week long and would be happy to look at your bike and do any updates as needed.
@@rockfordfosgateim not. I'll call your support and have a conversation. I have skyline version 240002237D and Amp version 1.5.0.0.
@@bartii8311 Our OEM Audio tech is actually here at Sturgis, but I spoke with him and it everything is configured properly on your motorcycle since digital tech enables the subwoofer left and right to “appear” on the Skyline screen (it does not matter whether it’s left or right because it’s a mono signal for the subs). I understand skyline will be rolling out additional software updates next month that should solve the “grayed-out” issue.
hello Rockford team, why is it 1000 euro more expensive than the previous model😔 best regards Jackie
completely kit is for roadglide cvo 2023 3400 euro, and for the model 2022 ist 2400 euro why is so expensive?
The 2023 model is different because it fits the larger saddlebag style. This is a complete redesign of the subwoofer enclosure and subwoofer. The subwoofer has more airspace (due to the larger bag) and the subwoofer has been improved with higher temperature voice coil to handle more power and equipped with a neodymium motor to keep the weight down.
Y’all should be damn ashamed of the way a stock Harley Davidson speaker sounds!
@@CHIM601 There are updates to Skyline that dramatically change the DSP setting in the factory amplifier and speaker setup. We have been doing these updates for the past 2 weeks at Black Hills H-D and everyone is beyond happy.
If your amplifier software isn’t at 1,300 or higher, you absolutely must do these updates. To see your software version: Press the “Gear Icon > Sound Settings > Speaker Setup”. When the dialog comes up, press “Yes”, then press “ Show Info” under the selected amplifier.