I do the same. 100% correct. It makes a big difference. I have a short mettal rod with a slot cut in to it with a dremmel. You can cut your sandpaper in strips and pull it through the slot. That is only for the breach area to make a nice loading tapre for the slugs. I put it on a cordless drill. Then pollish the burs off the rifling at the end when done. The Spa barrels are quite soft. Have to be carefull. The Avenger barrel was super hard and took a lot of work. When done you should be able to almost drop that slug to loading depth.
Man finally someone that is making this easy to understand, thank you for that. Can’t wait for you to get the Avenger rocking out some .41 groups @100yds plz keep us updated with some more videos. I have 2 avengers 22/25 and I love them but I’m ready to see how much of an improvement they will have after i follow all your tips…👊
Yesterday i removed chock from FX STX superior liner. And i polishing barrel Today i was checking how my M3 is grouping at 50 yards. NSA 33.6 GR 3 Slugs went to exactly Same hole 2 was little of. I I'm very happy with results i can't wait to go for 100 yards or 150 Thank You for sharing Your knowledge with US!!! GOD bless You and Your family Happy new year
Rifled barrels have "Lands" and "Grooves"..............he says "these grooves"............as he is pointing to the LANDS. But he's a Master Gunsmith....BWWWWWWWWWWAHhhhhh
@@airgunsofidaho4886 You think i can remove chock from my FX slug liner like with this method?? I'm not gonna drill I'm going to polish super crazy lol
@@tkielek24 I personally wouldn't remove it. I would just reduced the chock. Using very fine sanding paper and polishing paper should help reduce the chock.
Happy new year to you too and all you guys I hope you all do the tricks I’m teaching you and improve your accuracy we’ve got a lot to cover we’ve got a cover waiting your guns adding wait till the gun itself if you’re a bunch resting but we got so much to cover there’s a lot triggers but we’re going to get it done
Thanks..Have a leshiy 2 with the LW barrel...No magasine wobbeling. Some diviations in fps (+/-15 fps).. And a flyer every 5-10 shots. (1" at 60 Y)....Low fps do not correlate with bad accuracy. Either do high fps..
If selecting a .25 cal LW barrel to shoot strictly slugs, would you get the Poly barrel or Std 10 groove barrel? Would you get the Choked or Unchoked version? Do you believe a 17.7" twist would be good to shoot slugs? Hoping to hear from you.
Thanks for sharing your intel with the common folk. I’ll send you my new Kral Puncher Jumbo Dazzle in for a tune video. I can include some of the ammo I shoot through it. I’ve been swaging 17, 19 & 22gn hp slugs for it. It shoots them ok, but not as good as some pellets at closer ranges & there are the annoying flyers. Also the hammer hits pretty loud. Not sure if there’s anything that can be done about that. It’s putting out 34 fpe.
@@terminadorairgunsandoutdoors I seen your vid polishing your kral I think it was. Do you think lapping it the way he showed first then a polish would make it more accurate. Cause you're polish alone got a significant improvement. I have an avenger doing 2" at 100 yards. ½" at 50 so I imagine the cuts on the pellet are affected more by the wind at longer range. And idk if it would be worth it or not. Or just polish and leave as is.
@@JoeMama-hl5qc Hard to say. My Kral barrel saw a big improvement, but my Uragan barrel didn’t have any noticeable affect. It was already a pretty accurate CZ barrel. Maybe the less expensive barrels just need a bit of finish work done to them to reach their full potential.
Lol thats not how you lap barrels roflmao or take away chokes... Also valve return spring dose very little on valve opening force.. like next to nothing.. reshaping valve seal and having it flat reduces it far more. Reason you gain alot on certain airguns by removing valve return spring has more to do with valve return spring and its bushing obstructing dirrect flow and causing turbulence and slowing flow out from valve... Only thing you are correct on is that you dont really need valve returnspring or its bushing on anything in traditional valves.. but this is nothing new lol...
@@ezrabrook3993 lol what dose that have to do with facts? I dont make youtube videos and this guy defo should stop making them... So bad advices that end up someone being dead, ruin their guns etc..
And now you're NOBLEONE1 ah. You badmouth all the FX Fanboys on AGN but you can't stay away. This is your 3rd attempt to play. How long before you get BANNED again?
Banning people is not the right thing to do. I remember CZcams banned airgun channels not too long ago. Nobody liked that. Never, ever, be happy about censorship.
@@heithwatkins so please tell us what the forum owner should do when Jim just blatantly violated the posting rules? Not ban him? Just let him keep doing it?
@@RH-go2dk my only reason to dislike him aint related to FX or AGN.. but this guy is dangerous, showing catastrophical overfills for ppl, saying its ok to do so, lying that he connected this or that and its ok, iv cought him for lying in here and in AGN multiple times and usually at this point he disapers. This shit just might end up someone dying or getting seriously injured..
@@RH-go2dk OK then.........ban him. But if you do, then don't complain when Google (supposedly a public forum) bans you. I wondered how long the ban him for public "safety " would take to come up. That's always the excuse. I see JK just threw it out there. But I can find a public safety reason to ban anything, or anyone. Everyone thinks it's good to ban the other guy. But how many people do you think would love to ban all gun related content. 🤔
I would have never thought of running without a spring!
This is the airgun channel that is worth watching, keep em coming 👍
Your a Very Good Teacher. For the mechanically inclined. Thanks Bud
Hi, I did your barrel polish, I went from around 3 inches at 100 yds to sub MOA!
That's with cheap ass slugs, love your content!
Watched all your videos, great informant! Love the passion you have for it. Hoping to see more
Wow...very nice & instructive video!
I do the same. 100% correct. It makes a big difference. I have a short mettal rod with a slot cut in to it with a dremmel. You can cut your sandpaper in strips and pull it through the slot. That is only for the breach area to make a nice loading tapre for the slugs. I put it on a cordless drill. Then pollish the burs off the rifling at the end when done. The Spa barrels are quite soft. Have to be carefull. The Avenger barrel was super hard and took a lot of work. When done you should be able to almost drop that slug to loading depth.
Game changer,
Thank you.
Man finally someone that is making this easy to understand, thank you for that. Can’t wait for you to get the Avenger rocking out some .41 groups @100yds plz keep us updated with some more videos. I have 2 avengers 22/25 and I love them but I’m ready to see how much of an improvement they will have after i follow all your tips…👊
Lol dont you just ruin your guns...
@@JK-sn6tv i think thats a bot this guy needs to be stopped for mis information and using bits to back
One of your better videos.
I like what you do
Yesterday i removed chock from FX STX superior liner. And i polishing barrel
Today i was checking how my M3 is grouping at 50 yards. NSA 33.6 GR 3 Slugs went to exactly Same hole 2 was little of. I
I'm very happy with results i can't wait to go for 100 yards or 150
Thank You for sharing Your knowledge with US!!!
GOD bless You and Your family
Happy new year
Thank You for sharing Your knowledge
Hi from good old airgun boys. Andy have great day i will be watching
Great video.
Sorry for a stupid question, but what kind of oil are you taking about? Thanks a lot.
I polish all my barrols to. Big difference.
thanks man HAPPY NEW YEAR
Thanks sir now my kral knight.25 is shooting much better 51 fpe with 34 grains slugs thanks
Rifled barrels have "Lands" and "Grooves"..............he says "these grooves"............as he is pointing to the LANDS. But he's a Master Gunsmith....BWWWWWWWWWWAHhhhhh
Thanks brother.
God bless you and your family ❤
Yes god bless them all that those aluminium pressure tubes define laws of physics and never explode.
@@JK-sn6tv 🤣🤣🤣🤣🤣🤣
Subscribed, always open to see how folk work on their guns.
Thanks.
Thank you Sir
Grate video ton of good information
Happy new year
Lots of respect you have good knowledge
Lol. That's exactly what I do to my airguns barrels. I haven't see anyone making a video on this. That's alot of information
Including FX barrel,???
@@tkielek24sorry. I don't own fx airguns. I rather own 10 pcp airguns then just one fx air rifle.
@@airgunsofidaho4886 You think i can remove chock from my FX slug liner like with this method?? I'm not gonna drill I'm going to polish super crazy lol
@@tkielek24 I personally wouldn't remove it. I would just reduced the chock. Using very fine sanding paper and polishing paper should help reduce the chock.
Fx and Pollygon barrels are harder to get right and a lot more expensive if you mess it up.
Happy New Year Brother.
Keep up the gr8t video info! A+++ 🐴❤️🤠🇨🇱
Happy new year to you too and all you guys I hope you all do the tricks I’m teaching you and improve your accuracy we’ve got a lot to cover we’ve got a cover waiting your guns adding wait till the gun itself if you’re a bunch resting but we got so much to cover there’s a lot triggers but we’re going to get it done
Thank you for the video
I had to watch it twice
Thanks..Have a leshiy 2 with the LW barrel...No magasine wobbeling. Some diviations in fps (+/-15 fps).. And a flyer every 5-10 shots. (1" at 60 Y)....Low fps do not correlate with bad accuracy. Either do high fps..
A Leshiy blew up in a guys face stay away from Russian & East European guns bro!
Pro Tip: Remove the inner (NOT OUTER) break pads from your FRONT calipers and enjoy the best breaks ever!!!
If selecting a .25 cal LW barrel to shoot strictly slugs, would you get the Poly barrel or Std 10 groove barrel? Would you get the Choked or Unchoked version? Do you believe a 17.7" twist would be good to shoot slugs? Hoping to hear from you.
Interested in the exact same thing, owner of a LW barrel, 600mm with "17.7 twist. Some slugs fly semi-well, others suck hard.
I'm starting to think this guy is full of shit. He doesn't answer any questions which makes him useless. Don't even bother with him.@@thenameless615
Loved this video! Great Job Man! You don't have to share your secrets, but we sure appreciate that you do! Moe on my wife's account.
Next he says he cuts his barrels with hacksaw... I bet he dosent have mill or lathe lol
Thanks for sharing your intel with the common folk. I’ll send you my new Kral Puncher Jumbo Dazzle in for a tune video. I can include some of the ammo I shoot through it. I’ve been swaging 17, 19 & 22gn hp slugs for it. It shoots them ok, but not as good as some pellets at closer ranges & there are the annoying flyers. Also the hammer hits pretty loud. Not sure if there’s anything that can be done about that. It’s putting out 34 fpe.
Most definitely would love to help you
I’m also a fan I watch your videos
@@amazingairguns6350 Wow great. I started my channel to link up with other pcp enthusiasts. That’s awesome.
@@terminadorairgunsandoutdoors I seen your vid polishing your kral I think it was. Do you think lapping it the way he showed first then a polish would make it more accurate. Cause you're polish alone got a significant improvement. I have an avenger doing 2" at 100 yards. ½" at 50 so I imagine the cuts on the pellet are affected more by the wind at longer range. And idk if it would be worth it or not. Or just polish and leave as is.
@@JoeMama-hl5qc Hard to say. My Kral barrel saw a big improvement, but my Uragan barrel didn’t have any noticeable affect. It was already a pretty accurate CZ barrel. Maybe the less expensive barrels just need a bit of finish work done to them to reach their full potential.
Like another airgun brother says, "sharing is caring" I don't remember his name. Thank you
My Impact FX will hit its target at 100 yards why would anyone want to do this?
Hey man, don't you answer people?
Lol thats not how you lap barrels roflmao or take away chokes... Also valve return spring dose very little on valve opening force.. like next to nothing.. reshaping valve seal and having it flat reduces it far more. Reason you gain alot on certain airguns by removing valve return spring has more to do with valve return spring and its bushing obstructing dirrect flow and causing turbulence and slowing flow out from valve... Only thing you are correct on is that you dont really need valve returnspring or its bushing on anything in traditional valves.. but this is nothing new lol...
Where's UR Video's??? Oop's!!!
@@ezrabrook3993 lol what dose that have to do with facts? I dont make youtube videos and this guy defo should stop making them... So bad advices that end up someone being dead, ruin their guns etc..
@@ezrabrook3993 just because you see it in a video doesn't mean it's good information...
@@SteHughes90 Are you implying that everything on CZcams isn't real or true????
@@heithwatkins No, just some of it.
Drilling the choke out of your barrel is a quick way to make scrap metal but it's your gun, you enjoy yourself.
This guy have some serious split personality issues lol 3rd user going in AGN and now he talks about sending his guns to him self for a fix 🤣
Should i do the taper on the breach side of the barrel?
And now you're NOBLEONE1 ah. You badmouth all the FX Fanboys on AGN but you can't stay away. This is your 3rd attempt to play. How long before you get BANNED again?
Banning people is not the right thing to do.
I remember CZcams banned airgun channels not too long ago. Nobody liked that.
Never, ever, be happy about censorship.
@@heithwatkins so please tell us what the forum owner should do when Jim just blatantly violated the posting rules? Not ban him? Just let him keep doing it?
@@RH-go2dk my only reason to dislike him aint related to FX or AGN.. but this guy is dangerous, showing catastrophical overfills for ppl, saying its ok to do so, lying that he connected this or that and its ok, iv cought him for lying in here and in AGN multiple times and usually at this point he disapers. This shit just might end up someone dying or getting seriously injured..
@@RH-go2dk OK then.........ban him.
But if you do, then don't complain when Google (supposedly a public forum) bans you.
I wondered how long the ban him for public "safety " would take to come up. That's always the excuse. I see JK just threw it out there.
But I can find a public safety reason to ban anything, or anyone.
Everyone thinks it's good to ban the other guy. But how many people do you think would love to ban all gun related content. 🤔
@@JK-sn6tv You win 🏆
Ban him for safety award 👏