Crop Duster Tender Truck Dies Every 5 Minutes
Vložit
- čas přidán 27. 08. 2022
- This 1995 Chevy medium duty truck dies every 5-10 minutes while in use. It turns out to be another wiring nightmare. Go figure...
Send us a postcard:
Watch Wes Work
P.O. Box 106
Fulton, IL 61252
Send us an email:
mail@watchweswork.com - Auta a dopravní prostředky
I get tremendous satisfaction watching you point out what's wrong and then putting it right or at least as right as the owner allows
Sounds like you just “arrived”
You would also enjoy Rainman Ray. He is a mechanic who is good and honest, like Wes.
@@hondaveetc82 no, been watching wes since he was 10k
@@danielheartsill4269 nice, thanks.
The high fan current was likely from the old fan being seized. Just replacing the fan might have eliminated the high draw. But as usual you went the full Monty. Next time it seizes it won't take down the ship. Nice.
I had the same thought. It was probably wired that way from the dawn of time, but the stuck fan drew too much current.
@@Mark.R_ Yeah, and the poor wiring limited the current to the fan. Otherwise it would've stalled much sooner...
Any of y'all want to take odds on the truck operator just sweeping all the switches to "On" in one hand motion, and never bothering to check?
Agree
Looked at another way, next time it seizes nobody'll notice and it'll do whatever expensive thing that heat exchanger is there to prevent, instead of helpfully causing the 'truck shuts down' condition.
I thoroughly enjoy the wiring diagrams. So many people I know skip the pen and paper step and get confused when wiring. It's so simple to do, takes 5 minutes, and saves hours! And your diagrams look awesome.
I agree, it's really not that difficult. May make mistakes if somebody is hanging over you shoulder or making you hurry but otherwise its rewardign work.
I had a background in EE (RF) before ending up in the auto service business and being able to read and understand electrical circuits and schematics/diagrams has been a huge help many times. Too many parts changers out there nowadays that can't read diddly squat and just load up the parts shotgun and let 'er have both barrels until something works.
Your ability to delve into the madness of someone else's making, figure out their line of thinking, and make solid repairs always blows me away. If I had to repair that mess I would of ripped it all out and started over
seriously?
Remember that Wes has bills to pay and a lot full of jobs to do. The customer calls the shots.
@@horacerumpole6912 some people are easily impressed, I guess
I would have less hair than I do now, which is not a lot.
“The Madness of Someone Else’s Making”, starring Wes, The Wrenching Wonder, now playing on your local CZcams channel.
I worked for 33 years for an equipment rental company as a road mechanic and always loved coming across the dodgy shop repairs (all sarcasm intended). My favorite line to use on my boss was “you’d almost think I knew what I was doing “. He’d just roll his eyes and walk away. I did love that job though.
I’m retired now enjoying your videos. 👍👍👍
My answer to "Do you know what you're doing?!" is always "Nope." :)
I had a mechanic friend that was troubleshooting an electrical short on an aftermarket flatbed on a chassis. He was frustrated by his lack of being unable to duplicate the issue. His frustration resulted in him kicking the bed, and the sparks flew, allowing him to find the culprit.
Never ceases to amaze me that sales folks lose potential customers by doing stupid crap to piss off a potential purchase. Never fails.
I'm a software engineer that specializes in fixing other people's mistakes. These kinds of videos are my jam, man.
It brings boundless joy to my heart to watch you open that hose clamped junction box and realize instantly what was about to happen. This entire episode is so close to home for me that I laughed out loud at almost every single scene you cut together. Excellent.
LOL. Happy Sunday from across the river.
MrAPC, you took the words right outta my mouth !lol 40 years doing Marine and Auto electrical and we've seen it all. Other half wonders why I talk to WES while diagnosing ! :)
@@mauricekeithjohnson2598 Outloud to myself, when he asks or doesn't ask questions. LOL. This one in particular got me really good today.
Must admit, it was comedy gold as Wes opened that junction box and pulled out that rat's nest of wiring.
Hope that who ever wired the truck, has never touched the crop duster. Thanks for the vid , great job....
That was interesting to see. Wes ,you always seem to get some good wiring jobs 🙄. But you just have to love dealing with manufacturers that won't talk to people unless they are dealers. At least the fuse did its job and they didn't end up with a electrical fire. Thanks Wes for sharing and have a great day👋
Most mechanics seem to run from electronic issues, you calmly (or at least in the edited version of the video) just go step by step and figure it out. Nice job, it is fun to watch you figure things out. The area around you is lucky to have you.
Yeah the edited version. I like that. His poor dogs ears must be burn up. With all the unedited version hahahah
I like your ability to repair a wide variety of equipment in your videos, from cars to, for example, combine harvesters.
You're right , , , , from Poppin' Johnnys to Screamin' Jimmies and everything in between.
I worked on a friend's boat years ago with a 3116, it would run 30 seconds and stall, hand prime fuel through mechanical pump it'd restart, rinse & repeat.
Turned out the unit injectors were fed through drilled fuel passages in the head and sealed off between the head, injector & combustion chamber by yellow metal cups that the injectors seated in. They apparently like to crack and let combustion chamber pressure into the fuel passages after running a bit.
That motor grenaded itself a few months after we got all that straightened out anyway, swallowed one of its own valves, bounced it around inside the affected and adjacent cylinders then spit the whole mess through the turbo. Good times.
They are not very good engines and hard to work on.
Humble brag well earned, fan mount kinda does look like it was done by someone who knows what he's doing.
Another great video Wes. It seems like some companies go the hard way with their installations just so they can charge more because it took more time? Then cut corners like no grommet install to save time. Gets the customers out the door with guaranteed problems later for a repeat return customer. Your electrical diagnostic skills are top notch and I admire the thought process you go through. The fan install was 1st rate also. Doing the job right is not going the extra mile, it’s called professionalism!!!
Way to go Wes!!! Not only did the Dealer not get the repair job, but their award winning attitude cost them the parts sales as well. Being able to think on your feet is one of the things that differentiate Mechanics from Parts Changers. The down side is that it's so easy to burn hour of time on the internet sourcing parts for a simple cooling fan. Best of Luck.................
Great video! re: Hard start. I think a lot of those CAT engines have a check valve in the pump plumbing, that prevents the fuel from leaking back out and loosing prime. hard starting is a common symptom of that problem.
Definitely a hard start issue I would say. Great job Wes!
Hard start? Yeah I had a hard time figuring out if it was started!
Right! When that check valve allows fuel to seep from near the engine back to the tank, it takes extra time to get that fuel back up to the engine. On my big truck, the check valve was way back behind the engine, and had to take the "dog house" off to replace it. Some years later on something totally unrelated, I had the heads off and the mechanic mentioned that it might be a good time to replace that check valve because he could very easily replace it. BINGO!!! I thanked him and had it replaced even though it was not causing any problems.
Nice to see such a variety of "what a mechanic runs into"
- Rainman Ray for his "doodle do" and "never any rust, but heat-related issues" ( in Florida)
- Eric O (South Main Auto) with his "NY rust belt" problems and practical, and step-by-step diagnostic know-how
- Wes with his "who else would SEE, let alone WORK ON - a Crop Duster chase truck?" wiring mess... in rural area (hard to get parts where he lives)..
All entertaining, watching ~~40+ years - and 3 life-times of real-world experiences... and ingenuity ...
... that you'd never know of - or see - living in just ONE area of the country. We all appreciate the time & effort it takes to DO THIS WORK - let alone - make all this great content (with humor) and get glimpses of the day-to-day life in a shop .. it's priceless.
Gotta love it.
Funny how you are so proud of the fan (trivial) while I'm amazed at your troubleshooting such an electrical maze.
Nice work!
No computers, entirely mechanical. Love to hear it !
Looks like some kind of siege vehicle the A team would have built!
These are some of the best videos. There is no need to apologize. A lot of us enjoy the diagnostic process, progress, and the fix.
Another FrankenTruck lives! Thanks to Wes the plight of the American farmer has been lessened.
I hope that you are taking some pictures, and keeping a record of your top 10 sketchiest wiring encounters. Although you might have to increase that to top 20.
Tanks for explaining what they were using the truck for, I’m a farmer from Norway and it’s quite some different agricultural your having over there😊 thanx for good content and keep it coming👍👍👍
When I was farming I’d do the same thing, planted grain sorghum in late June, then in mid October, fly wheat seed on & have winter wheat pasture for the cows. I hope that this makes sense to you. We’d work the land pretty hard.
When every repair fails bring it to Wes. He can fix it.
Customer service is almost a thing of the past, no wonder the local distributor went out of business with company support like that. 😞 Wes you're the real deal!!!
I like the engineer's notepad. Used lots of that before we all got PCs and programs that crash.
11pm, off to bed and Wes drops a new video. Excellent timing all round. Hope you and yours are safe and well.
What country are you in ? Nine am here in EST North america
@@12345NoNamesLeft I’m with you , 9am South Central Pa.
@@12345NoNamesLeft Must be Australia or New Zealand
@@12345NoNamesLeft Australia. Melbourne.
I think the automotive electrical engineers association owes you royalties. That, and all the electrical hackers out there....
I really enjoy the problem solving, but the best part is the sarcasm. Marvellous stuff.
Thank you for not using the zip ties on the fan.
Always amazes me how people stack everything on one circuit that can't handle the current that is needed. And than they wonder why it only works for so long... Thumbs Up!
I’ve seen so many people do what I call FIGE jobs “ F it good enough … “ , I make good side money cleaning up their hack jobs and cleaning it up properly like you do. Hats off sir
Appreciate you having us along, I’ll catch you on the next one. Keep It Safe Out There Sir
Commonly referred to as a "loader truck". Our loader had a single pipe held by chains that was lifted and lowered by a winch. I spent many an hour running that truck and it was all designed and made by my dad!.
Well, darn it! Now I want to see that arm extend with that single cylinder. Wes, you're a damn tease!
Wes - marketing suggestion. For your shop you can take a page from the Statue of Liberty and have a slogan for your business. "Give me your run down, mis-wired, poorly running, tangled mess of a vehicle ..." It seems that they find their way to you anyway so why not invite them in?
While these projects likely are extremely frustrating for you, your videos are fantastic. Educational, informative, and humorous at the same time. Thanks for sharing this one.
the item you point out as a pump is the governor, think two stroke detroit, same with the injectors and it has a rack like the two stroke, change the filter by the tank under the cab, usually behind the fender, everyone either forgets about it or dont know its there,
It's amazing to see how these companies just lose money for the most inane reasons. I needed to warranty a sight for a pistol, and the company has a no questions asked replacement policy. 2 hours later and 3 emails and it was in the mail Monday.
Meanwhile the manufacturer here only sells to dealers, the dealers only communicate through emails a day later, and refuse to sell you the part on its own.
Sure. I absolutely WON'T throw a Chinese made fan on there I bought for 100.
Exactly. Some American companies are their own worst enemies.🙂
With customer service like that, you really wonder how some companies stay in business. There must not be much competition in their niche.
If it makes you feel any better, the company I work for occasionally sends small replacement parts for free because the time spent invoicing and payment processing isn't worth the cost of the parts themselves.
Just had that happen with a faucet manufacturer Delta, will look for their product next I replace a faucet.
Not just a Mechanic now a Detective, whose occupation is to investigate and solve crimes, nice Video, thanks ⭐⭐⭐⭐⭐
@WatchWesWork, we come here for your beautiful voice, impressive intellect, determined preservance and master journey man skill level 🙂
Another awesome repair vid, he’s lucky that wiring didn’t melt down the cab.
Also, to your struggles with finding parts or anything resembling customer service from vendors? Yea, it's a real joy these days, isn't it? Between businesses being short staffed and struggling with high turnover to the supply chain nightmares due to corporate America offshoring all manufacturing, it's amazing we can get anything done today.
Drives me crazy when people blame everything on politics. It's greed. Companies have no conscience when it comes to screwing their customers/employees. Must get the maximum profit!
@@gailtaylor1636 Sadly I agree with you. Corporate greed from the C-suites of American companies is running rampant and average Americans are paying the price. I'm all about capitalism. However, our American capitalism is so corrupt, broken and unrestrained with no accountability from our government. Hell, how could politicians hold these companies/individuals accountable? These politicians are on their payroll since they got elected with their campaign donations in the first place. Great system!
@@warbirdwf Don't be sad about agreeing with me. I'm always right!🤣😂🤣
It's all complicated. We have a 300 unit apartment complex under construction in Austin. Subcontractor was able to deliver all the windows from an MN factory, but the same factory could not deliver doors at the same time, as their hinge subcontractor couldn't deliver. Hard to "dry in" like that. The 24 unit complex 15 minutes' away has door & windows (different sub & supplier) but can't get light fixtures . . .
You need to change the name of your channel to "Watch Wes Fix Everything". You're amazing!
What could go wrong? "My middle name is danger".. love it....
Great video!!! Your diagnostics and walking through the issues is amazing, and then you telling us how and why is really captivating. I look forward to the next one!!!
The true "industrial" solution would have just been to cut the wires to the fan and keep working. Current draw goes way down, and since the fan was locked up it wasn't doing anything... therefore, you didn't need it anyway. :)
Like the way you think!
I'm guessing that's the hydraulic fluid cooler. Which invites far too many other questions. Have they been running the hydraulics "hot" all this time? Has the fluid level been checked? How few hours are left on the hydraulic motor that drives the auger after all that abuse?
And, we know how much Wes just _adores_ hydraulic fluid 😀
Was a Classic case of “Why do it right if you can just do it”. Nice fix.
No thought process...farmer engineering at it's worst....great job Wes.
Ive seen upfitter shops do much more butchery hack work then farmer ever could. Farmers work with they have, upfitters dont get to use that excuse except for cheap corner cutting lazy
Dang Wes, you do good work. Glad you make these videos for us all to see! 👍👌
What an astounding ability to wade through BS and tie up loose ends.
Your electrical troubleshooting skills are admirable.
The stuff you have to deal with. I work on industrial electric motors. We are repairing quite a few at a significant cost to the customer because the lead times on replacements are in the 30+ week range.
Oh and another benefit of covers crops is their ability to affix nitrogen into the soil.
I keep a stock of relay fuse combos as I have a severe dislike of inline fuses. Trying to find a link to my favorite setup. It's made by Buss.
Of course they didn't want to sell direct, and anything less than the entire cooling "solution". Pretty sure that Thermal what ever company is just a front for a China manufacture. Cooling is literally LEGO's. Needs to fit these dimensions, and throw a fan on it. Hayden or Spal and call it a day.
Is it the bussman RTMR ones? Nice looking kit but personally not a fan cos I'd rather use the large style automotive relays as they're way more available.
@@hannahranga Good point
After that mind-numbing and no doubt want to be fuse-blowing, no grommet, unprotected wiring disaster, your wiring diagram and subsequent installation was so clear, obvious and superior. Suddenly it all made some logical sense, that had been so lacking before. The heat exchanger 'deal' you were offered was simply absurd, I guess your fan cost less than 10% of the dealer quote. Too much work for a truck that wanted its pension book and a funeral pyre, but you came through, thoroughly entertaining and satisfying to watch.
Just one word to describe the way you went about that job Wes=======BRILLIANT!
I just got done dealing with "I don't know what they were thinking" in the home repair realm. I feel you.
"WES THE WIRING WIZARD". Man you are really talented. Really nice work and the farm equipment is nice to see the content. Thank you.
Wes, your definitely my favorite mechanic to watch on CZcams and this so because your humor is fantastic and your content is educating, entertaining, and diverse. I’d be remiss if I didn’t mention your wife’s delightful and helpful contributions, and the dog’s, too. 👍❤️🔧
100% agree with you! ☝️
I shared your site with my older brother that recently passed, he told me thanks many times that he really enjoyed watching a man that probably forgot more than any other mechanic on the Tube ever learned.
Pretty high praise from another gone soul. Keep up the great work Wes.
Your my favorite channel on the tube!
i thought (when i was still working) that i got some real shit laid on me,but you really get some REAL shit sent to you !!!!!!!!!!!!!!!!!! and the good part is .... you handle everything like superman !!!!!!!!!!!!!!!!!!! can't stop watching !!!!! one hell of a mechanic !!!!!!!!!!!!!!!!!!!!!!!!!!!
dang son your professionalism and dedication is impeccably impressive.
Question ? Do the people ever go back & watch your videos about their repair ? I mean like when they bring you job's with crazy wiring & no diagram or engine's that don't start ? Any how, I enjoy watching your videos. Wishing you & your family noting but the best !
From Brooklyn N.Y. 😃 !
Sometimes.
I work a lot on this engine if I had to address the hard starting I would start with the check vavle in the fuel filter housing do a leak back test on it
I think you should belong to a Mensa wiring program. I have difficulty putting batteries in a flashlight let alone figuring out those messed up wiring things. Great video as usual and thank you for them.
The joys of having older trucks in Illinois. Finding a ground is fun. I have an old McHenry County tandem that's more rust than metal. Wanted to use some of the evaporust but I'm afraid my truck would dissappear.
I just love sitting down in the morning with my coffee and a new episode of Watch Wes Work. Your episodes are like a good mystery novel, blended with a Hallmark romantic movie. There’s a surprise with suspense in the beginning but we know there will be a kiss at the end. As for the mystery of Cat engines, you might want to take a look at the Adept Ape’s CZcams channel. He’s a Cat expert and has a lot of good Cat service content.
These 3116 engines are kind of a nightmare. I think I'll just fake a heart attack if he wants me to work on it!
@@WatchWesWork Wes you would not have liked the 5 v16 1000hp generator sets we had at the computer centre plus a v12 same output for standby power ( yes it was a UK banks main computer centre ( 1.5 mw for the HVAC and 1 mw for the IBM doodads
@@WatchWesWork 👍🏻. I have a 2004 Cat C7 acert in a motorhome and I have come to the conclusion that while the C7 is an electronic engine, any issue cascades quickly into an avalanche of dollars. A turbo failure led to a Heui pump failure and while doing that I found that the front end needed parts. Sigh. Thank you for all the work you put into your videos. Especially the sarcasm. Makes my day.
oh lucky you Wes some times wish owners would keep some sort of wiring diagram when fitting such large after market pumps and such
What, no scotch taps, with a fine quality install that was originally done, you think there would be at least 1/2 a dozen.
You get all the good jobs LOL, you and Eric.
You will never be out of work.
If we knew better…we do….we know you do in fact know what you’re doing. Nice job.
Once in a while.
Nice work!
I have a 98 C6500 with the same Cat motor and a flat bed. Also have a push button start. Must have been a common issue.
You are the Man, Wes. You bring calm and logic to chaos and loopy!
You could totally be a voice actor. Not because of any particular skill, but i’m not sure why you just have a very memorable voice.
That bracket was so nice that I'd want to visit it once in a while. I'd sure have a framed picture of it on my wall. Nice work!
When you hear the giggle you know he found the issue lol
Smart to buy a universal fan for the truck.
Those companies steal out of their own pockets for not selling separate parts lol
1:18 Yes the 3116 and 3126 were mechanical. Common fuel rail with a rack to move all 6 injectors.
2:30 Yes that is a fly back diode.
22:31 Thank you for making the brackets. There is enough "Who did it and ran" done to this.
Dictionary definition of stoicism, "watch wes work".
The man with infinite patience.
I know that struggle. Had a guy at work hook up a 400 watt amp and a car stereo in a Hyundai Robex wheeled scrap magnet at work to the lift pump circuit. He said that he'd turn his stereo on, and the engine would only run for about 30 seconds and acted like it was out of fuel. Imagine that. It was slowing the pump down to the point it was almost stopped, starving it for fuel. I ripped the stereo out, per bosses orders, and told him to deal. Problem solved.
I'd usually just pull the 87A terminal right out of the relay socket than leave it hanging with a piece of heat shrink on it.
These are the sort of simple harness repairs that my feeble old mind can grasp.
Great video brother. Wiring issues are always the worst, especially on "custom" jobs.
Bet you never knew how important you would become to your county! Awesome work Wes!!!
What are you talking about? Men all over the US have been doing this and more since before Jesus gave up his cowboy gig for religion.
Wes fitting a fan with cable ties, yes! The same day as a cockrill starts laying eggs!
Genius! Great diagnostics and repair!
Thanks. I appreciate your approach to your work. Straight forward makes perfect sense.
Nice repair as always! Really appreciate the quality drawn wiring diagrams. Nice and neat.
Wes for President. He's way smarter than any of the Idiots we have had in Washington
Nice job on the brackets! Your fabrication force is strong.
Nice job! 👍
Thanks for the video Wes. I like your approach on these kinds of fixes, especially when you diagram the circuits. Well done.
Wes the man of unlimited patience.
It blows my mind that more of these cab/chassis don’t just burn to the ground. I’ve never in nearly 20 years of wrenching seen one of these that was wired by somebody who had even the slightest clue what they were doing.
Electronic gremlin is a lot of fun especially when you are chasing it down from someone else work great job and video God bless keep up the good work from GA
Hey Wes. I recently ran into your channel and I have really enjoyed it. I like that you don't typically half ass repair things and want to fix it correctly the first time. Too many of us have suffered from a vehicle that had been screwed up by a hack mechanic/s. Having wrenched on old, classic VW's for decades as a hobby, it's amazing the amount of butchery you find from previous "professional" mechanics.
Too many other CZcams automotive fix it or will it run channels have "mechanics" that seem perfectly content in doing things half ass or cut corners sending the wrong message to their viewers in my opinion. My Dad use to say to me "if you can't do it right the first time, don't do it at all".. To bad such a high percentage of current "professional" mechanics don't live by that motto.
Some people shouldn't be allowed to own wire cutters 😳. Always run relay's try to stay away from factory harness tap off battery with fuse at battery unless you need a toaster put pilot light on circuit to remind you to turn off or put a battery disconnect on new feed from battery to shut down aux circuit. Tons of electrical work on class 8 trucks some of that will make you talk to yourself
Interesting project - nice wiring diagram illustrations! Great to see a fan substitute that worked so well.
You know back in the 80s we had Toro 72 mowers with Cozy Cabs that had to put together for The City of Edmonton and Calgary ! You should have seen all the accessories had to be installed on them ! There was Work Lights , an Extension for the fuel tank through the Cab , Signal lights , Interior heater , Horn , Rear view mirrors , some had Cruise Control , complete Guage package , it was a Nightmare but fun to do ! 😇😇😇 We put together over 300 of those !
Good job, lucky it didn't catch fire, all the best to you and your loved ones
Great job, always interesting to see how you repair a cobble job by some one else.
Another SUPERIOR JOB done by Wes Working ! Forget trying to replace original equipment with original equipment ! Much faster going with replacements. Right Wes ?
Wes is not only a great mechanic, but he is also an electrical engineer and also moonlights as a parts detective.
Love your videos but 14 gauge is way too light for 30 amp. 16g=10 amp, 14g=15amp, 12g=20 amp, 10g=30amp. You might be able to fudge it a little but if you stick with these gauge sizes you will be safe!
Yeah, automotive doesn't really play by NEC rules. The relay socket I bought is rated for 50 amps but has 16 gauge wire...