Terimakasih sudah memberi saya inspirasi untuk pekerjaan saya..... Saya belum mampu membeli JOINTER untuk pengerjaan BAK TRUK.. Dan anda memberi saya solusi yang tepat untuk meringankan beban biaya saya... Terimakasih🙏... Salam dari indonesia🇮🇩
Not the ONLY problem, that setup won't solve the problem with twisted/warped boards at all, which a real thickness planer solve elegantly. Still a nice and useable idea.
Put some metal weight on the ends of the boards to hold that thing down so you can get a nice consistent feed and not worry about it moving on you. Great idea tho, will probably get a hand plane soon and I’m just looking at ways to use it before I get it haha😂
This is brilliant. I've always wondered why people always go with router planning rigs insetad of handheld planer. Seems like the handheld planer would be way more efficient at it.
This is awesome. I'm looking to do this with some pallet wood but don't have $400 for a planer. so if i narrow it down a bit and shorten it, i think we're in business!
It would be better to add some latch into the sleds, pressed with a spring onto a screw-thread. As noted by Степан Мудрак, there are vibrations that will rotate nuts. The sleds in my build have very tight holes, so they hold in place, but if you drill bigger holes they will move down due to the nuts turning by vibrations. Edited Finally, I made the video where you can see in detail how to attach the planer: czcams.com/video/Fl0PIJNlbxw/video.html
I will show details in the next video in a few days. It is simple, and it can be done that way on most planers. (Unfortunately, I have to work at the moment, no time for making videos, which makes me very sad.)
Olá Berg! Eu gosto de seus vídeos. Mas não de música. Vou tentar evitar a inserção de música em meus vídeos. Em vez disso, eu gosto de ouvir sons de ferramentas. O som do trabalho é melhor.
I'm sorry, Victor, but I can't make it for you. I can't keep up with my work right now, or making videos or anything else. Furthermore, I'm overloaded. 😞
I have shown proof of flatness in another video czcams.com/video/Fl0PIJNlbxw/video.html (at the beginning) by laying a metal ruler in different positions.
@@architechdesign Thanks for that. I'm eager to make yours as it appears to be the most effective that I've found on the internet and simplest height adjustment too.
![planing wide boards perfectly with electric hand planer / amazing way of planing [woodworking]](http://i.ytimg.com/vi/Mp2vSodcTOQ/mqdefault.jpg)
I like how you made the adjustable height fences.
I don't believe it. I was looking for a way to do this, but with a belt sander. You, my good sir, have just solved a very difficult problem for me.
I tried a belt sander too. It did not help at all. 🙂
The belt sander is very slow .
Just what I m looking for right now, millions thanks bro.
Clever. We shared this video on our homemade tools forum this week 😎
So many exceptional creative genius on youtube. I am amazed!
This is what I need for my electric hand planner
Terimakasih sudah memberi saya inspirasi untuk pekerjaan saya..... Saya belum mampu membeli JOINTER untuk pengerjaan BAK TRUK..
Dan anda memberi saya solusi yang tepat untuk meringankan beban biaya saya...
Terimakasih🙏...
Salam dari indonesia🇮🇩
terimakasih, bagus sekali idenya. sangat kreatif dan sangat bermanfaat untuk pekerjaan perkayuan. salam dari Indonesia.
Not the ONLY problem, that setup won't solve the problem with twisted/warped boards at all, which a real thickness planer solve elegantly. Still a nice and useable idea.
It will if the board is wedged and hot glued in place. 😊
Excellent c'est vraiment super merci beaucoup pour la vidéo 📼
Je suis content que tu l'aimes. (I don't know if we can rely on ai translators, but my reply is: I'm glad you like it! :-)
Put some metal weight on the ends of the boards to hold that thing down so you can get a nice consistent feed and not worry about it moving on you. Great idea tho, will probably get a hand plane soon and I’m just looking at ways to use it before I get it haha😂
This is brilliant. I've always wondered why people always go with router planning rigs insetad of handheld planer. Seems like the handheld planer would be way more efficient at it.
This is awesome. I'm looking to do this with some pallet wood but don't have $400 for a planer. so if i narrow it down a bit and shorten it, i think we're in business!
Thank you
Отличная идея!
It would be better to add some latch into the sleds, pressed with a spring onto a screw-thread. As noted by Степан Мудрак, there are vibrations that will rotate nuts. The sleds in my build have very tight holes, so they hold in place, but if you drill bigger holes they will move down due to the nuts turning by vibrations.
Edited
Finally, I made the video where you can see in detail how to attach the planer:
czcams.com/video/Fl0PIJNlbxw/video.html
i would just use 2 screws and counter screw them so they lock
The Bosch gho 16-82 has mounting points for such a build.
I think this is a good idea. I woukd have made the side rails out of angle iron because id worry about those wood ones flexing too much.
Opá obrigado pela dica muito boa e de baixo custo.
great job!!
Muy buena idea, saludos desde Venezuela
Great idea!
Ta ai um video que eu queria gratificante tamos juntos
Well done! trying to figure out how you attached board to back of planer. My planer doesnt have any good spot to mount on backside
I will show details in the next video in a few days. It is simple, and it can be done that way on most planers. (Unfortunately, I have to work at the moment, no time for making videos, which makes me very sad.)
Magnifique!!
Por qua do vc faz um desse pra mim...nao consigo usar a minha plaina eletrica manual...
Belíssimo trabalho amigo show de bola parabéns ganhou mais um inscrito e deixo aquele like valeu 👍 🤝 💯 👍
Olá Berg! Eu gosto de seus vídeos. Mas não de música. Vou tentar evitar a inserção de música em meus vídeos. Em vez disso, eu gosto de ouvir sons de ferramentas. O som do trabalho é melhor.
Sensacional!!!
You do realize that the axis on your drill press is skew right?
Mantap
You show how did you setup the planer!
How to set up the planer can be seen in the second video: czcams.com/video/Fl0PIJNlbxw/video.html
Die beiden äußeren Längshölzer sind nicht hoch genug!
como agarro el cepillo a los listones ?😮
Headphone warning at 10:00.
😃😃😃😃😃
How did you mount the back post? I don’t see any bolts to use.
I just saw your 2nd video. Thank you
How much will you charge me if you make it for me? Including the planer and shipping to Illinois.
I'm sorry, Victor, but I can't make it for you. I can't keep up with my work right now, or making videos or anything else. Furthermore, I'm overloaded. 😞
Joos❤
Так твои гайки на шпильках будут раскручиваться при такой вибрации
Неплохо подмечено. Вибрации довольно большие.
proof of squareness?
I have shown proof of flatness in another video czcams.com/video/Fl0PIJNlbxw/video.html (at the beginning) by laying a metal ruler in different positions.
How did you setup the planer to use with the jig?
That's a good question. Thank you. I'll make a detailed video because it may be of interest to more people in the future.
@@architechdesign Thanks for that. I'm eager to make yours as it appears to be the most effective that I've found on the internet and simplest height adjustment too.
@@chrismcg7856 Finally ... I made the video where you can see in detail how to attach the planer:
czcams.com/video/Fl0PIJNlbxw/video.html
@@architechdesign Thanks very much. I'm looking forward to seeing it
Deine Bohrmaschine hat einen üblen Lagerschaden. Bau dir doch eine neue
Ich möchte. Es ist nur eine Frage, wann das passieren wird. Etwas anderes hat immer Vorrang.
👍👍👍🇧🇷🇧🇷🇧🇷👏👏👏👏👏