BMW M62 740i 540i 4.4 Timing Chain Guide Replacment Job
Vložit
- čas přidán 25. 08. 2024
- A short video of procedure doing the timing guide job on Bmw 740i E38 1997
Hopefully you will like it and if you are interested in more videos like that please leave the comment below
If you would like to be part of the channel permanently here's Patreon link
/ the777garage
Greatly appreciated for any kind of support!
Insta @the_777_garage
Tiktok @777garage
Music by: lakeyinspired-chill day
You’re good mechanic for giving an estimated cost of the job!
Hi Ed, I am doing the same job on my M62TU and I had to make a tool to hold the crank pulley so I can safely remove the "Jesus" crankshaft bolt. I didn't want to use an impact in my case. I have a video about it-Part 40 video. Keep up the good work mate.
Cool! Thanks for posting this! It's good to know people still have an interest in these older BMWs!
Awesome. I need one done for my 2000 540i
Started right up!😎😎😎🤠
Sounds healthy and strong too👍👍👍
Good price. My Range Rover L322 has the M62TU ( vanos/ same as X53 ) engine and needs this.
Well done mate 👍
If I have a over advanced timing check engine and do the guides everything will be ok??
2:00 agreed
So mine pop up check timing guide chains and I’m not sure if that’s leaking from where I think this video helps but I’m not sure 😂😂
Start stripping to see 😃
How much does a job like this cost?
I have an L322RR w/ M62
Hi Mate! Can you tell me is that true, cuz Im confused and dont know what to do with my e38? Some people say that, after rebuilt the vanos system on m62 engine, ,,the thicking noise'' dont stop, or stop but just for a short time. After searching internet, I found out, that the oem gaskets reacts with engine oil, and the best way is to buy aftermarket gaskets from independent company, there are made from different material, and that fix the problem. What is your point of view ?
I'm looking at doing the same on my 735i m62Tu.
How reliable are those cheap timing tool sets, are they precise, as I've heard setting the timing on these engines is pretty tough, if not done with proper tools?
Any special brand of the cheap tools to buy?
Did you manage to time it with the tools on first try?
Hi!they actually not that bad… there is no specific brand have i used but they are in the blue box sells £70-80
I personally didn’t had issues..i had sometimes vanos control fault but not sure if it was vanos itself or timing
hello again i have a 728i it runs perfect .but when i first start the car and put my foot on the break , then press the button to move the gear shifter . its hard to get out of park into reverse then pull down to drive its sticky .i use to move it with one finger a while ago .
Sounds like actuator which located underneath the plastic is bit dogy..cause when u press brake that actuator lifts locking pin for u to select gears
@@The777Garage whats the plasic bit underneath the plastic bit is that the that the panel underneath the gear knob is it the swich on the the gear lever. my gear knob is big and wood ,its a 1999 728i .
At what milage did the chain guides break on this one ?
Have an 02 540I with about 100 k :)
About 140ish k
can u give a link for the timing tool??
I timed mine and bank 1-4 vanos jumped clock wise after removing the cam lock. When I spun the motor by the crank bank 5-8 vanos jumped on first 1/8th of a turn. Did your do that too?
Frank Sepulveda this one is non vanos,but yeah for vanos Engine that’s normal
The 777 Garage hahah my bad I have tu I’ll get it assembled and start it up thanks
How did you torque the crank bolt? With your impact?
Yes
Mine will be done as well. My 3.5 m62tu started to rattle last saturday. He is now at the shop.
Do you have advice for other parts to get replaced while changing the guides?
The vanos for example?
Its a 1999 with 230.000 km/ +-140.000 miles miles
If u can afford yeah vanos ,main thing oil separator behind timing chain (must)
Do you have the video following where you stopped? I'm about to do chains and guides on my m62 (pre vanos) and haven't found alot of info on using the chain tensioner block, torque specs,etc. also my chains that connect the cams has a bad tensioner so I'll be doing those as well
To be honest I didn’t use tensioner block..used cable tie and worked as good and less hassle
@@The777Garage okay thanks for letting me know
G'Day, I am in Cairns (FNQ Australia), had the timing chain tensioner replaced, still makes the noise intermittently ...so decided to bite the bullet ... there is no way I can come to you, but I would appreciate your suggestions on the components to replace ...
if you come to OZ, I'll buy you a beer of three ...
(the car has about 300,000 kilometres on it, but like most E38 Owners, I love the car.
I thought the water pump and clutch fan as well ... thanks
Hi!
I guess ur engine is vanos version?
Can be driven if the chain is loose? Thanks
Literally just to move it..but obviously better not
Good work ! where are you located at? I have a car just like this one in video that needs same thing done.
Thanks for feedback
Im based in Spalding,Lincolnshire UK
@@The777Garage too bad you're not in california. I have a 2001 740il with a bad timing chain and no one seems to be able to help. Im even considering buying a new engine and mechanics etc just leave me hanging. Smh
❤️❤️👍👍👍
How long did it take to do the whole job
Bit more than a day
The guides get destroyed when the tensioner becomes slack over time. As long as the tensioner is maintained along with regular oil changes the guides should last, they are then only dealing with friction not chain thrashing caused by a slack chain.
Well soon or late it needs to be changed anyway..usually they go after 130k miles plastic doesn’t last that long tho
Where can I rent the special tools for a timing chain job on my 99 bmw 540o
540i
Want to come to USA in Montana n do mine
Special tools now are $100 so I guess if u bought them u would still save tons of money on labour
Did u time the vanos or no
This non vanos
Hello mate, i have a m62b35 non vanos engine, and I’m curious how u did the timing.. all I can find are timing guides for vanos engines
1st cylinder at tdc..lock the flywheel at the back of the engine (there’s hole between gearbox and engine)
Camshafts should be facing upwards with numbers and letters on the end..lock them up using special tool and u good to go to remove chain
@@The777Garage so after I’ve locked the engine at the tdc, I can remove the cam sprocket and the cam sensor wheel, is there anything that I have to look out for when I’m assembling it back together?
Where you located I would like to bring my BMW to you.
Spalding
This is a vanos engine ?
Non
We wanted 2 see the actual work boss
Can you please tell me what brand timing chain kit did you use? Also what is the cost of this job please? Thanks
In this video febi
Costs depending what else U want to do along with it
How much does it cost?
Depending how deep u want to go and what parts brand u choose..1-2k