Zotac | GeForce RTX 3080 TI | Thermal Pad Replacement
Vložit
- čas přidán 25. 08. 2024
- We'll be replacing the thermal pads on a NVIDIA ZOTAC GAMING GeForce RTX 3080 TI AMP Holo 12G Graphics Card.
Thermal Pads 3mm: www.amazon.com...
Thermal Pads 2mm: www.amazon.com...
Enjoy the video? LIKE and SUBSCRIBE for more!
GET CONNECTED:
Twitter | / mannyocrity
Twitch | / mannyocrity
Militia Discord | discordapp.com...
Thanks for this video Manny! I will be getting my build completed in the next few weeks and will be using your review and replacement guide as a yardstick for my 3080 TI AMP HOLO. Much appreciated man!
Glad I could help!
@@Mannyocrity What's the thickness of stock thermal pads?
is youre fans are quiet in 65%?? because my are super loud even in 57% that's weird
Much thanks for the video. It gave me the confidence to replace the thermal pads once the process is shown. I do leave my pc to mine when not doing work or gaming. Using the recommended Thermalright Thermal Pad 2.0mm to replace just the VRAM and repasted with Noctua NT-H2, it went from 98-104°C down to 78 to 82°C while mining at 87 MH/s. Simply amazing, thank you.
What 3080ti do you have? do they all use the same size pads?
@@dariusiakabos I have the Zotac 3080ti amp holo
@@abnRZ Hey friend, just to confirm, you didn't touched the thermal pads of the backplate right? You got great results, i'm thinking of doing the same :)
@@Domazin I changed only front thermal pads on my zotac 3080 and the result is great, planning to do the same with my zotac 3080 ti, can you confirm only front thermal pads can get the job done ? I only have 2.0 mm thermal pads.
excelente video solo tengo una pregunta mi grafica es usada y le faltan tornillos del plastico que sale en el minuto 4:09 que medida son? los 6 tornilos
I just subscribed because this video proved to me that you don't play around and fudge tests. Thanks for the honest assessment on the cooling pads. By the way, the difference in the wattage between the 2 test configurations is insane. Almost 100 watts. Not to mention the fps differential of 13 fps, etc. Have you seen this kind of discrepancy in this test before? The fan(s) speed...wow. 800 vs 1700 for the 2 tests. That 1700 is going to cool the system better.
What's the stock thermal pads thickness ?
I have the gigabyte 3080 ti and fortunately my temps go from 78-88 when mining and low to mid 80s gaming so I don't think it requires any action from me. Thankfully because the model I got has 4 year warranty which I don't want to void. but I figured I would check this out just so I'd have the knowledge.
I have Zotac 3080 amo holo. My temp were core: 65 stuck, mem: 75-80. but hotspot was on 104.7 and it was throtlling hard. I repasted and changed the front thermalpads with coolermaster 2mm and now core temp is 75-77, mem: 75-80 and hotspot is still on 100-101 on max load but not throtlling. Should I need to replace backside pads too? I mostly use it for gaming.
Good job replacing the pads. Yes, I'd leave the rear pads alone. I changed only the front. Temps went from the low 90s to low 80s so down about 10 degrees for the memory, plus I was able to take fan down from 70% to 65% and still have low temps.
What mm pads did you use on the front?
@Rein S HI. I used 2mm pads. Worked perfectly.
@@TechnologyHive i also used 2mm gelid extreme pads on the front but i still get 100C memory 95 hotspot temps.. Do you maybe know how this is possible? i didnt use a lot of thermal paste as in the video, but still a substancial amount.. could this be the problem? thanks.
@Rein S Are you mining or just playing video games? 95c for the hotspot is rather high if you're just mining eth. However, if you're a miner mining on an algorithm like Ravencoin, which utilizes core, then I can see the gpu hot-spot being high. But 95c is still a bit too high.
If I were you, I'd dismantle everything again, double check thermal paste application to make sure it is properly distributed all over the core, and that by sight, on the heatsink, it seems to have had a good amount of distribution from pressure.
If the paste is not evenly distributed due to thermal pad resistance keeping the heatsink from applying the right amount of pressure, then the pads, for your case, might be 1.5mm or less.
But everything checks out, and all is in order, then try a higher fan speed. I have mine at 80% on my 3070ti's and 3080ti. This made a huge difference. In fact, try this first.
@@TechnologyHiveThanks a lot for the detailed answer. Im mining RVN btw, i get a very low hashrate on eth for some reason...
crees que me alcance quiero comprar dos piezas una mide
100 X 100 x 2.0mm
100 X 100 x 3.0mm
cres que me alcance a cubir toda las areas que necesito?
So you're saying if i get high vram temps changing the pads won't do anything ? Thanks for the video
This mod will reduce the memory module temps, but raise temps for all other sensors (because heatsink is pulling more heat from the memory, it must pull less from other components). This is alright because thermal throttling in 3080s almost always comes from memory temps.
He used cheap thermal paste making his hot point go up its 3.3 W/mK u need to use something better like a 8.5 artic Mx-6 is great and use grizzly thermal pads u will get way better results than what he got
I'm going to be doing this to the same card any updates or advice???
Thanks for this video.
You used TG7 which it has 3.3 W/m-k ??? It is very low thermal conductivity therefore the GPU temp. not changed.
Is there is need to change backplate thermal pads of 3 mm or not ?
If I could go back. I would only change the VRAM pads.
Thank you for your selfless sharing. What is the size of the heat sink?
The thickness of the heatsink or the size of the card in total?
@@Mannyocrity The size of the thermal pad
You missed the on the VRM's (under the black heatsink frame thingy on the PCB).
Yes, I did in this video, but I ended up finding them and switching them out as well. I was planning on making a video on it, but just haven't gotten around to it.
Is this the updated video where u put pads on the vram
Hi do you know size of the Two long screw on back plate i need to replace them
I thought the front takes 2.5m pads not 2.0?
You forgot to change the VRM thermal pads (3mm)
Yes, I did. I have changed them since. I need to create an updated video for this including it.
@@Mannyocrity Can you let us know please? I have replaced my pads, but believe I missed the VRMs as you have as well. I only replaced the existing pads I saw.
What is your ambient temperature?
I replace the back with thermalright 3mm and use alumunium mod on the front. Alumunium supposely has more heat transfer capacity. But under full load I reach 90degree in 2 minutes.
I wonder are you testing this on winter?
I made this video in August, and I do not have air conditioning in my office, so ambient temps were probably pretty high. Most likely in the mid 80s. I have just switched from factory cooler to a water block, so I ran another test with factory air cooler and average temps where mid 70s and hotspot was low 80s. Ambient temps were mid 80s.
You think it could be from the oil in your skin, contacting the thermal pads, since you didn't bother to wear gloves?
Which can i use pads for 3080ti trinity.? Thanks
I heard some people are using .75mm pads on this card?!?
I'm pretty sure I have that exact same card coming in your opinion do you really think that was necessary? To change the thermal pads. Did the ones in the card seem subpar
No, I do not think it is necessary, but was fun learning
This thermalpads is compatibly to Zotac 3080Ti Trinity?
I think you've messed up the torque on screws. Or the equilibrium of pressures.
Can you elaborate?
@@Mannyocrity Torque on screws matter at a lot of things. I think the placement of the cooler unit don't contact well enough with the pads/parts correctly when it's too lose or tight.
This is why Gamers Nexus do pressure tests nowadays.
@@RoyalPredator I understand torque on screws. I was just wondering why you think I messed them up? As long as I use the same pad thickness and then tighten down the screws we should be good. Torque mainly matters on things with moving parts. E.g. like a cars engine.
@@Mannyocrity Because the values dropped on mems, which is cool, yet the GPU core and hotspots remained the same.
Maybe something gone wrong there.
I've experienced the same issue with CPU.
Once replaced paste, not changed.
Had to do it again because of high RAMs, and temps dropped nearly about 10C, 15C under benchmark load. That time I've set torque properly.
hello i use 2 mm thermal pad in my zotac 3080ti under the temperature of the memory from 93 degrees to 73 at work but my core temperature rose 4 degrees in my 3 zotac i use the artic mx4 for the core, it is not much temperature at work I am in 51 core and 78 memories but before the memories were in 46... it happens to me in my 3 zotac
I use the same thermal paste too,core tempt went up. I think the thermal paste is just bad lol
does this have the same size as a zotac trinity 3080 ti ?
I have this same 3080ti card. My temps aren't bad (GPU 63° Hot Spot 80° while gaming Fans 75%) but I would like to try this with the copper shims? They seem to make more difference. If the shims drop the temps 20° to 30° that would be great!
Let me know how it works out.
Fans 75% that must bee loud as hell
How’d it go?
Did it work?
copper shims? please tell us more.......
Si mettono anche nelle vrm
same sizes for the 3090 model?
Not sure
Hey! Is this card worth it? Or should i spend more and get a strix/suprim x,, I won't overclock or do anything crazy
It is tough getting a card. I'd almost say to get what you can if you want a new high end card.
Zotac is one of the cheapest cards... get any brand but theirs.
Honestly it looks like u draw a lot more wattage on average? Is it worth it?
Honestly, no. I think a regular 3080 is a better deal.
What is the thermal pad thickness for the MOSFET heatsink?
I believe the vrm is 2.5mm. I have this information at home. I'll get back to you a bit later with the exact thinkness.
Would this be similar to the ZOTAC Gaming GeForce RTX 3080 Ti Trinity OC?
Maybe?
is it me or you just uninstalled the card from 2nd pcie slot ?
1:26
I believe it is an optical illusion. The card is 3 slots wide, so I think it just looks that way, but I honestly do not remember that far back. I can promise you it is currently plugged into the first.
@@Mannyocrity Now i can sleep in peace!!! :P
I have an RTX 3080 Amp Holo that has been giving me some issues in the past months. Fans rattling, overheating, random restarts while gaming. Any chance that the thermal pads are at fault?
Zotac support has been useless, literally stopped responding to my mails. Might as well try my hand at changing the pads since they wont help.
first thing would be to see what your thermals are at and then you can decide the next course of actions. Changing thermal pads will only help if the card is over heating. If your fan is rattling then that could also be an issue and you may need to replace the fan.
@@Mannyocrity what's the best way to do that?
Running MSI Kombustor and taking note of the temps when the system restarts?
@@M4trockvideos You can run any thing that will grab the thermals and then keep them up and watch them when you play games to see how high they get.
Is warranty going to be void after diy replacement?
I thought so, but someone commented below that it does not.
I put paste in gpu my temp up after this i of 45c to 50 in gpu and my mems whit 2mm down 92c to 80 ... why my temps up in gpu?
did you put enough paste? What quality of paste did you use? the paste's thermal make a big difference.
@@Mannyocrity hello I put the mx-4 gelid I put in the 3 gpu and in the 3 it went up 3 degrees is not much, but I thought I was going to improve the temperature of the core, where I bought all the thermal pad and paste, they answered me that maybe the thickness of the thermal is not adequate (2mm) and that is why the heatsink does not make good contact with the core.... which I do not think about because it makes a stop when assembling
@@marcelosalama1860 The thickness of the thermal pads will change thermals. Putting pads that are too thick can make thermals a bit worst.
@@Mannyocrity but I put 2 mm in memories it is a zotac 3080ti trinity I think that is the thickness that you have, have you put that or not? it's still only 3 degrees more in gpu if I see that it gets worse I'll open again
There are probably thermal pads under the black heatsinks over your mosfets/power stages that you didn't swap. Just FYI if you care to switch those too, they're not going to get as hot as the g6x does, but thought I'd let you know.
There are. Someone else also pointed this out. I have changed them, but tour right. They did not do much to decrease Temps.
Is this gpu good for mining? Eth *?
no idea. I use it for gaming.
No MLCCs on that card. Guess I'll avoid Zotac.
warranty will be ok?
Nope, this will void the warranty
@@Mannyocrity In the US it won’t void the warranty, they passed a law disallowing it.
Hi gentleman, could you please help me choose the right card for mining. These are the price tags(after tax) for the 3070 Ti in my region:
Asus Strix: $1030
Asus Tuf: $900
Gigabyte Aorus: $885
Zotac AmpHolo: $900
Zotac Trinity: $825
I am wanting to know is it worth paying more and grabbing the Zotac AmpHolo instead of Zotac Trinity, or no it doesn't worth it, I should go with the cheaper one (Trinity model)
Are you a vampire?
lol, those are some serious canines.
Supposedly that brand isn't great
Working well for me.
@@Mannyocrity There was another channel that did a compassion and got the equivalent of stock temps. Gelid Solutions seems to work well. Just ordered some so maybe i'll update is I think about it.
Hey elderly man, could you toss a link in to those pads you got? Didn't catch them in the video.. or put in discord?
I put them in the description that way you have to come back here and it counts as another view. =)
can you just squirt the paste on the memory chips? ive seen videos of people just pouring into cpus leaking everywhere and its no problem at all.
Do you mean instead of using thermal pads? If so then the answer is no, but the paste isn't thick enough to make contact with the heatsink and chip. The pads are used because there is a bit more space between the heatsink and chip. For CPUs the heatsink is pressed right up against it.
@@Mannyocrity i meant like if you just coated the old stock pads or even i saw a vid of someone making a slice in the old pad and injecting the paste that way