Building Wooden Roller Coaster Model (CoasterDynamix Comet) Part 1 with Hyde
Vložit
- čas přidán 9. 09. 2024
- In the late 2000s CoasterDynamix released a wooden coaster model called The Comet. This HO Scale model is based on a traditional wooden roller coaster. Hyde who has never done any modeling tries to tackle building the model and in part one unboxes and does prep work.
Make sure to subscribe, we post videos at 2 PM on weekdays & 10 AM on weekends
Visit us on the web at www.inthelooppodcast.com
Facebook: inthelooppodcast
Twitter:
The Legend @inthelooplegend
Hyde @onlinehyde
Ranger @parkblotter
Drew The Intern @drewtheintern
Little Spoon Kenny @intheloopkenny
Clint Novak @clintnovak
Instagram: InTheLoopPodcast
Untapped: DrewTheIntern
Cant wait for part two. Those coasters are no longer available, shoot!
Thanks for taking us along for your build, Hyde. A bit different for the In the Loop channel but, equally good. I am looking forward to Pt. 2 trash or not.
Great segment Hyde...looking forward to part 2.
I hope you have more luck with it than I did, mine would never complete a full lap, could never work it out, great models for detail though.
Wow looks amazing can't wait 4 it 2 be built
Great Stuff Hyde. I'd recommend watering down the glue a bit in the future - so its easier to spray.
You should learn how to follow directions before you start assembly. Try making thin cardboard discs from thin paper board using a hole punch, the punch is the same diameter as the bent mounting holes. You may need to stack more than one disc in each hole, just make them level with the surface of the base. Now you can flock the base without loading the holes with ground foam.
If you need to undo super glue type glue just use nail polish remover, it will soften the glue so you can remove any mistakes.
the back of a pad of pa
I have bases and bents to fix it for $15 -and I buy parts for comets if you didn’t toss it in the trash
Where do you get them
Where do you get these
I will try to do it with Woodglut plans.