The thing you called the pre-boost reference line is actually the wastegate actuator line. "Pre-boost" fueling is not affected by boost at all. That pump does not read boost pressure "from the turbo". Boost pressure is read only from the intake shelf in the manifold. That line sends the same Manifold-AFC pressure to the wastegate actuator. What you would have removed was a "boost elbow", which is supposed to restrict the pressure that the wastegate actuator sees. No boost elbow means your wastegate should be dumping at stock ~18 psi. A boost elbow (without any leaks) would make the wastegate think it's at 18 psi when the turbo is actually pushing 25, 30, 35, etc. into the AFC.
@@Timmandel theoretically yes. Realistically, it depends on if your stock fueling is up to the task. This is the idea behind "boost elbows". It is also dangerous because you can overspeed your turbo if you disable the wastegate by plugging that line. Get a boost gauge before trying it.
Keep doing Grandma truck content and 50K is in the bank🙏, hope she is doing well and I can’t wait to see her riding shotgun in those nice seats, head pushed back from all that 24v awesomeness. Thanks for sharing Sam👍👍👍🇺🇸
I just bought a grail truck. 98 QCLB 12v 4x4 NV4500. Outside (bed mostly) is a little rough, interior is almost mint. Pump has been messed with a bit for sure, but I haven't dug into it yet. Tappet cover leaks like a sieve. I need some 3rd gen wheels for it, it has some hideous steelies on it.
Glad to see you’re getting some ads on your videos!! Saw the first two mid roll ads and was upset, then realized it means your content is getting the views it deserves! Keep up the hard work
My 12 valve has an in-line pacbrake so I can get by with whatever turbo I want. Still works the same. Also the fleece cheetah is a bad girl that sounds amazing.
At least you can see your turbo. My 6.7 Powerstroke, I just have to trust the boost gauge to tell me if there's a turbo under the hood or not. Hell, I can't even see the engine for all the crap under there. It's a great engine but I will never work on it myself. lol
In my bosses 6.0 powerstroke, some mice are the wires to the turbo. And it took us four or five hours to make a 2 hour drive. Definitely didn’t have a turbo spoolin
I hope granny never gets in an accident after you welding those seat mounts up with a 115a flux core welder... That's good for body work, nothing structural... That's Sketchy!!!
@@toadamine negative buddy. Super easy convenient welder that does a solid job. Made videos showing how the words have held. Perhaps you should watch those videos
Try out the borg Warner k27, supposed to be good up to 450 horse. Utilizes the factory mounting location for exhaust brakes and all that. That’s what I’m going to run next on my 96 5 speed
The k27 is what u want for a turbo i got mine from power driven diesel She is a nice mild upgrade Dropped right in my 98 qd cab 12 valve Running afc live and turbo tuner also Make a great combo
Would love to see Kenny with the red plate again, Shame ET3 dominated Salt Lake... Normally Ken does well when the track gets a bit slippery, Not this round though.
Your driveway/intersection situation is absolutely hilarious to me for some reason. Like why are always something weird going on and what makes it a popular parking spot amongst the locals?
Good video content except the yelling from the neighbors liked the music cover up. The 98 sounds excellent now. Keep up the good work and stay safe out there.
I have the same intake on my 95 12v, it has so much air flow every time I let off the pedal my turbo chargers and sounds like a blow off valve, but I try to not to save the turbo lol
What’s the minimum upgrades for an automatic to start messing with the fuel plate? I have a rebuilt trans, no idea what’s in it, but I know it has a billet triple disc converter.
Every Adapto Deal I try always has a couple hiccups along the way. I have an AFE on my Gen3 and dang thing gave me 2 mpg and dropped EGT by 100 degrees. I have watched some super cross, heats are too short in both time and distance and the speeds are way down from old time motocross. All jumping and no higher speeds. Guess it is good for the participants as injuries are much less severe. Doesn't stoke my fire though as I am a damned speed demon. Are those steel toed bedroom slippers you got on?? LOL
NO TOMAC??? Jk.. Webb has next round in the bag if he don’t fuck up in practice or the heats or Kenny if he gets the hole shot on #3 and holds on to it.
The thing you called the pre-boost reference line is actually the wastegate actuator line. "Pre-boost" fueling is not affected by boost at all. That pump does not read boost pressure "from the turbo". Boost pressure is read only from the intake shelf in the manifold. That line sends the same Manifold-AFC pressure to the wastegate actuator. What you would have removed was a "boost elbow", which is supposed to restrict the pressure that the wastegate actuator sees. No boost elbow means your wastegate should be dumping at stock ~18 psi. A boost elbow (without any leaks) would make the wastegate think it's at 18 psi when the turbo is actually pushing 25, 30, 35, etc. into the AFC.
On a stock if you plug that line would you get more boost?
@@Timmandel theoretically yes. Realistically, it depends on if your stock fueling is up to the task. This is the idea behind "boost elbows". It is also dangerous because you can overspeed your turbo if you disable the wastegate by plugging that line. Get a boost gauge before trying it.
no more 'fuel plates' for me..every 12 valve p pump gets AFC live w/ max travel kit...love em!
After I installed mine and my 3k springs I have had nothing but problems
So what your saying you Like paying 400 more for 45 dollars worth of parts?
@@shaunfuller939 what happened with yours? Mines had no problems since
Everybody I know their trucks don't run right with afc live...user install maybe I don't know? I'll keep my 0 plate
Love catching supercross when in not too busy. Favorite rider, Ronnie mac of course.
Keep doing Grandma truck content and 50K is in the bank🙏, hope she is doing well and I can’t wait to see her riding shotgun in those nice seats, head pushed back from all that 24v awesomeness. Thanks for sharing Sam👍👍👍🇺🇸
That’s one badass truck! I can’t get over how much she whistles😍
I just bought a grail truck. 98 QCLB 12v 4x4 NV4500. Outside (bed mostly) is a little rough, interior is almost mint. Pump has been messed with a bit for sure, but I haven't dug into it yet. Tappet cover leaks like a sieve. I need some 3rd gen wheels for it, it has some hideous steelies on it.
“Loosing the seats would be the tragic bit” 😂😂
Glad to see you’re getting some ads on your videos!! Saw the first two mid roll ads and was upset, then realized it means your content is getting the views it deserves! Keep up the hard work
My 12 valve has an in-line pacbrake so I can get by with whatever turbo I want. Still works the same. Also the fleece cheetah is a bad girl that sounds amazing.
She seems to run really nice 👍🏻 the smoke is not to bad 👌🏻💨💨💨
That's a nice intake 👌👌👌. I myself is running a S&B Fits awesome 👍👍👍
Grandmas engine is looking so fresh & so clean!
At least you can see your turbo. My 6.7 Powerstroke, I just have to trust the boost gauge to tell me if there's a turbo under the hood or not. Hell, I can't even see the engine for all the crap under there. It's a great engine but I will never work on it myself. lol
In my bosses 6.0 powerstroke, some mice are the wires to the turbo. And it took us four or five hours to make a 2 hour drive. Definitely didn’t have a turbo spoolin
Enjoy your Channel, thanks for taking your time to put out a good show . I do indeed like the red and silver truck . Looks cool .
I hope granny never gets in an accident after you welding those seat mounts up with a 115a flux core welder... That's good for body work, nothing structural... That's Sketchy!!!
lol rookies only say stuff like that. This welding has built more flat beds and tractor attachments than I could count. No weld failures.
@@VBELTandSONif you Cobb enough in there itll hold... 😂👍
@@toadamine negative buddy. Super easy convenient welder that does a solid job. Made videos showing how the words have held. Perhaps you should watch those videos
@@VBELTandSON will do. 😁👍
"aggressive whistles" had me Rollin 😂😂
My heart nearly skipped a beat when that tool box nearly fell on your toes, toe caps save a lot of pain in the workshop , just saying , love your vids
@20:26 "Boone lay down" I'm thinking being nice not wanting to knock him over getting on it. "Boone lay down wanna see some smoke" lol that was great
Try out the borg Warner k27, supposed to be good up to 450 horse. Utilizes the factory mounting location for exhaust brakes and all that. That’s what I’m going to run next on my 96 5 speed
Nice looking truck. Love that bumper
Awesome video as always bud :) Always very informative. One day ill head your way and show you my rig. I got a 18 Dually cummins "Harvest Eddition"
Good vid. I hollared for ya when that box fell on the trailer by them red gym shoes! Stay safe!
The k27 is what u want for a turbo i got mine from power driven diesel She is a nice mild upgrade Dropped right in my 98 qd cab 12 valve Running afc live and turbo tuner also Make a great combo
It would really wake your truck up to put a non egr horn on it . You would.be surprised and the k27 turbo would work great
My 1st gen starts it’s smoke show at 4th gear then really shows off in 5th
Jay G 👍🏻
Would love to see Kenny with the red plate again, Shame ET3 dominated Salt Lake... Normally Ken does well when the track gets a bit slippery, Not this round though.
Sam can you show me how to tune a mechanical motor. Lol God bless
Ow man turn the wrench and let the horsepower out. Mechanical 12v😍😍😍
Your driveway/intersection situation is absolutely hilarious to me for some reason. Like why are always something weird going on and what makes it a popular parking spot amongst the locals?
They don’t park there now with a cable blocking the loop. Those ppl yelling were across the road.
Liking the videos. Just got my black hat from you guys. Thank you.
He351cw with a spring gate is a great upgrade I ran it for a while before adding the s475 compound setup
May as well take that heater grid and throw it over the fence while your in there
tailgaters get the reverse lights at stop lights
I put a manual switch on my old truck to turn them on, fun to do that and blip the throttle at stop lights when someone has been tailgating you 🤣👍🏻
Coal roller, ready for grandma's truck to be done.
Lol I noticed that but of you look at how much gas there is while your welding you can tell that your using flux core
Well remind me not to pull up behind you now. Truck looks 👍
I was watching super cross yesterday after picking up my new to me bike haha couldn’t say no to a little old Suzuki dual sport
I have the same air filter! Very nice!!
Good video content except the yelling from the neighbors liked the music cover up. The 98 sounds excellent now. Keep up the good work and stay safe out there.
I have the same intake on my 95 12v, it has so much air flow every time I let off the pedal my turbo chargers and sounds like a blow off valve, but I try to not to save the turbo lol
I like Flux core. No tanks to deal with and more penetration.
What’s the minimum upgrades for an automatic to start messing with the fuel plate? I have a rebuilt trans, no idea what’s in it, but I know it has a billet triple disc converter.
Engine is all stock as far as I know except for a bhaf, 4 inch straight pipe, and silencer ring removed. I know these mods don’t add much power.
Just wonder, the air bag on the seats? I believe they go off and cinch the female part of the seat belts, in a accident.
Dynamat or similar brand before adding carpets back in!
Yep especially on the older vehicles
You know that progress is going great when you have 7 ads in your video, keep up the good work bro 👍
There was 7?? Damn CZcams throwing some adds on there
Good work Sam keep it
I just took my fuel plate out because everything I read said that a zero fuel plate and no fuel plate at all is the same thing
I have read both, I believe the fuel plate needs to be there as a "backstop" even if it is a 0.
Love the grandpa slippers lol
Grandpa wears nikes now eh hah
I’m a Tomac and Cianciarulo man. So I’m...well a Kawi man.
What air box is that?
now that just makes me want to do that to mine. already took a grinder to it but i want more lol
I knew that I hade to watch it because all I need to hear it see is the word horsepower and then I am fight on the video.
Damn Sam your socks were does your socks end and your leg skin begin (White) 😎😂
Aggressive whistling? That's a new 1
Every Adapto Deal I try always has a couple hiccups along the way. I have an AFE on my Gen3 and dang thing gave me 2 mpg and dropped EGT by 100 degrees. I have watched some super cross, heats are too short in both time and distance and the speeds are way down from old time motocross. All jumping and no higher speeds. Guess it is good for the participants as injuries are much less severe. Doesn't stoke my fire though as I am a damned speed demon. Are those steel toed bedroom slippers you got on?? LOL
Ken Roxsan dude has been through a lot Comes back still Kickin but
Sam, are u running straight pipe from turbski back on98? Grandma 24 valve looks amazing can't wait till she done 👍🏻🇺🇸
In the video you just did fuel plate only ? No spring or smoke screw adjust ?
Keep up the good work
I want to see that 24v finished.
TRUMP 2020 ✌
I see your truck has the EGR deleted what did you do to prevent the check engine light from turning on?
Another good video.
Long time fan of the channel but got to 21:17 and unsubscribed.
Haha just kiddin brotha!!! We’re on the Webb wagon around here!!
I got a 94 12v.. wanting to use it for towing.. any advice for what I should do to the truck for more power?
NO TOMAC??? Jk.. Webb has next round in the bag if he don’t fuck up in practice or the heats or Kenny if he gets the hole shot on #3 and holds on to it.
Lay down lay down I need to see some smoke😂😂
1996 turbo works good I’m told. Wile you’re at it find me one.
I mean 2006
Andrew Camerata style intro! Smart
Which part?
@@VBELTandSON the aerial view man .)
@@VBELTandSON enjoy the vids man .
Haha thank ya I do that all the time
You should get the banks twin ram for your holy grail truck
I ain’t made of money 😂😂
Them are sum sweet red booties there. Are they your "Boat" shoes. lol
Classy hill folk. 😂😂😂
AFC LIVE FOR THE WIN!!!!!
Skipper 😂
Can you use the turbo that you used on your 5500 for your grandma’s truck?
Check out a tater hx35 turbo 💪🏻💨💨
Cool slippers, bad cherry
Favorite Supercross rider had to retire after he whooped up on number 3
Hell ya brother what’s the status on the flip truck?
BAD CHERRY overload
Getting some skateboard vibes Stefan Janoski's
Yup back in a passed life. Went thru dozens of janoskis
how was it done, all i saw was seats
Duramax tuner just put out the stealth hx35
You said this thing is for sale right😉
This is something that I hadr yo see. For the first time ever i am one of the first people to comment on a video, yay.
Do you have head studs on the red 12 valve?
So is there any benefit from changing out the governor spring
Yeah hold a longer power band I would say. Stock starts to defuel so low it can’t stretch its legs out
So what are you pulling on this relatively stock 12v with NV4500?
G56
Are you running stock injectors?
I love your sign in your shop bud. Trump 2020
Supercross num 94🤷🏼♂️
What size is that CAT turbo?
Super Hx40 swap next!?! 😂
ET3 tomac
Hx40
What do you do to provide a living for you and your family ?
Channel main focus is on my job. Check out some of my other videos 👍🏻
God i want a 12v so bad
Don’t you have a couple turbos off the 08 you could use?
Little big
Got ya, I thought I remembered you saying in another video you had some extras. Just couldn’t remember size.
Sense your not gonna use the cat turbski put it on the 98 lol
Must be Somewhere in Mexico when rolling coal huh?😂
Canada lol
Gretta said "how dare you".