@ 3 mins - there are two switches in the kit because it is intended to replace both of the two switches in the shifter assembly. One is the lower one that you are changing which is the park position sensor switch, the other switch is higher up on the shifter mechanism and is the reverse position sensor switch. Both switches are known to Nissan to be high failure points. Of course they were too cheap to ever do a recall on it.
Yea someone recently commented on one of my two videos in this issue and made me realize the second one is also for the my vehicle. I didn’t know it was for the reverse position. I actually still have it in my shed in the bag because I like to save everything but good thing I did just in case you never know. Regardless been shifting strong ever since. Thanks for the info!
Question, have you ran into this problem ever since you replaced the switches? Just curious because there is also a switch on the brake pedal next to the brake switch that also engages that solenoid.
@@franny3451 in my experience the solenoid is only actuated by the second switch mounted at the brake pedal. The two switches up at the shifter are the parked position and reverse position sensors. True though if the park position switch were to fail open it would block the signal from getting to the solenoid so it is part of the circuit. The reverse position sensor is what tells the ECM to turn the backup lights and camera display on the dash when in reverse.
My girlfriends car just started doing this. I found if you push the lever forward really hard it will unlock. Will be replacing that part now. Thank you!
This helped a lot! I just did the same thing: I used electrical tape make it thicker so it can click. I’m going to buy the replacement soon but this’ll be a for-now thing. Thank you! Taking apart the console wasn’t too tough, either. With small research I figured out how to take it apart.
crock crock 1 your best bet is to find the one that’s in your versa and actually match it up yourself find the part number on it.. I don’t do replace things any other way
I'm about to take my car in for it's regular service and to investigate why my shifter stuck in park. It being stuck is intermittent and your video makes a lot of sense. I was wondering if my transmission was going, or the fluid was low...the service department might check all kinds of things but who knows if they know about this or would tell me it's such a simple fix so thank you!
or you could've just gotten one of those electric reciprocating saw (jig saw) and cut off the top part of the white plastic mount, that it drives up to keep the shifter in the lock position. Cut it off about half way. You would still have to push the buttons in to move the shifter.
try to bend the metal part outward of the switch,,,,hold the part that touch the little plastic nipple and at the same time bend it outward,,what happens is it straightens with time and doesnt push all the way to activate the nipple part,,,,this way you dont but those switches'''''''''
Same problems I have it with my nissan sunny n16 I can't move my vehicle from park to drive I have to press shift interlock button ...so what to do in that .....? How do I fix that problem..?
hey, I clicked on your link and it said, "sorry we couldn't find your page." do you know somewhere I could purchase it from. and what is the exact name of that piece? I tried looking at the name I got off the package up and couldn't find it?
I have a 2014 but the console looks the same. But trying to find the oem part number for my year i can't find the part with the metal arm. Is it the solenoid because the diagram for my year shows the solenoid only being the metal box with blue protective wrap. Do you have the part number
Chubbs I would say there’s maybe one or two parts you might get stuck but overall It’s really it’s not too too difficult. You should be able to search a how to for it
@ 3 mins - there are two switches in the kit because it is intended to replace both of the two switches in the shifter assembly. One is the lower one that you are changing which is the park position sensor switch, the other switch is higher up on the shifter mechanism and is the reverse position sensor switch. Both switches are known to Nissan to be high failure points. Of course they were too cheap to ever do a recall on it.
Yea someone recently commented on one of my two videos in this issue and made me realize the second one is also for the my vehicle. I didn’t know it was for the reverse position. I actually still have it in my shed in the bag because I like to save everything but good thing I did just in case you never know. Regardless been shifting strong ever since. Thanks for the info!
Question, have you ran into this problem ever since you replaced the switches? Just curious because there is also a switch on the brake pedal next to the brake switch that also engages that solenoid.
@@franny3451 in my experience the solenoid is only actuated by the second switch mounted at the brake pedal. The two switches up at the shifter are the parked position and reverse position sensors. True though if the park position switch were to fail open it would block the signal from getting to the solenoid so it is part of the circuit. The reverse position sensor is what tells the ECM to turn the backup lights and camera display on the dash when in reverse.
Does anyone know the technical name of -not either piece he replaced- but that moving white L shaped piece
My girlfriends car just started doing this. I found if you push the lever forward really hard it will unlock. Will be replacing that part now. Thank you!
This helped a lot! I just did the same thing: I used electrical tape make it thicker so it can click. I’m going to buy the replacement soon but this’ll be a for-now thing. Thank you! Taking apart the console wasn’t too tough, either. With small research I figured out how to take it apart.
Just bought the replacement, waiting to receive it. If I can I’ll comment if it worked for my 2014 Nissan Sentra. 😁
Got the part 3 days ago, installed it the same night and shifter has been working ever since. Thank you!
What's the part called
Yes it did! No problems since. Exact replacement!
07 nissan versa SL i need it asap can you give me information thank you
crock crock 1 your best bet is to find the one that’s in your versa and actually match it up yourself find the part number on it.. I don’t do replace things any other way
What is name of this part ?? I have same issue
John Ingrassia my Sentra 2013 needs RK 5842 , can't find it on Amazon, please help.
ADVANCE IGNITION Compatible with 13-17 Nissan Pathfinder Altima Shifter Repair Kit New Set of 2pcs 2013 2014 2015 2016 2017 www.amazon.com/dp/B08L7TTSY9/ref=cm_sw_r_cp_api_glt_i_27M54GJR1AC4ECTCGMN0
I'm about to take my car in for it's regular service and to investigate why my shifter stuck in park. It being stuck is intermittent and your video makes a lot of sense. I was wondering if my transmission was going, or the fluid was low...the service department might check all kinds of things but who knows if they know about this or would tell me it's such a simple fix so thank you!
Very few would tell you when it's 800.00 for two solenoids.
Thank you John!!!! Im going to order and replace. Appreciate you doing this 2nd video!
Change car battery.
My same problem solved.
If you haven't changed it for long time, try it expecting quick fix.
Good luck.
Do you have a video of how to take apart console? I have same problem just can’t figure out how to remove console to access problem?
Mine has the same problem..what a pain
Just stuck a stick in the slot and fixed...
I wish I watched this video before hand.now my transmission have in.i believe the cause is the shift solenoid and a weak fuel pump..
That switch is for the altima/pathfinder...did it work for the sentra?
Hello Thanks a lot for a video !! Your amazone order link is expired can you please again post it in comment ! I can’t find it on amazone either
I used a long bread tie on my sis's 05 altima UNTIL I find my zip ties. Better than a quote for 800.00 for two solenoids. Chekeye.
Thank you very much for saving us from the dishonest mechanic
Amigo, where can I buy the solenoide?
or you could've just gotten one of those electric reciprocating saw (jig saw) and cut off the top part of the white plastic mount, that it drives up to keep the shifter in the lock position. Cut it off about half way. You would still have to push the buttons in to move the shifter.
try to bend the metal part outward of the switch,,,,hold the part that touch the little plastic nipple and at the same time bend it outward,,what happens is it straightens with time and doesnt push all the way to activate the nipple part,,,,this way you dont but those switches'''''''''
Thank you so much John. Very very helpful...
Same problems I have it with my nissan sunny n16 I can't move my vehicle from park to drive I have to press shift interlock button ...so what to do in that .....? How do I fix that problem..?
I'm here 2023 and the link is gone
Which Allen wrench you use to unlock the shifter?
Thank you for the video.
Thanks you IT was very helpful👍👍👍
Where’s the Amazon link for the part? I can’t find it
hey, I clicked on your link and it said, "sorry we couldn't find your page." do you know somewhere I could purchase it from. and what is the exact name of that piece? I tried looking at the name I got off the package up and couldn't find it?
Still can't find this part on Amazon, can you help me to find it please?
Zip tied mines lol
Thank you!
Cannot find this part on Amazon. I need it ,can you provide me with further details on how I can order it ? RK 5842
Where’s the link/info for Amazon to order?
www.amazon.com/dp/B08L7TTSY9/ref=cm_sw_r_cp_api_glt_i_27M54GJR1AC4ECTCGMN0
I have a 2014 but the console looks the same. But trying to find the oem part number for my year i can't find the part with the metal arm. Is it the solenoid because the diagram for my year shows the solenoid only being the metal box with blue protective wrap. Do you have the part number
ADVANCE IGNITION Compatible with Nissan Pathfinder Altima 13-17 Shifter Repair Kit New Set of 2pcs 2013 2014 2015 2016 2017
ADVANCE IGNITION Compatible with 13-17 Nissan Pathfinder Altima Shifter Repair Kit New Set of 2pcs 2013 2014 2015 2016 2017 www.amazon.com/dp/B08L7TTSY9/ref=cm_sw_r_cp_api_glt_i_27M54GJR1AC4ECTCGMN0
@@johningrassia2381 park position switch?
I'm fixed but I have a problem my car key it's not detected...help me !
Thanks
How hard is it to take the center console out?
Chubbs I would say there’s maybe one or two parts you might get stuck but overall
It’s really it’s not too too difficult. You should be able to search a how to for it
ADVANCE IGNITION Compatible with 13-17 Nissan Pathfinder Altima Shifter Repair Kit New Set of 2pcs 2013 2014 2015 2016 2017 www.amazon.com/dp/B08L7TTSY9/ref=cm_sw_r_cp_api_glt_i_27M54GJR1AC4ECTCGMN0
Am confused. Part is for Pathfinder, Altima. Is it compatible for my 2013 Sentra S ? Currently this part unavailable. I live in Ontario Canada.
@@peterwilliams2840 it says Nissan Pathfinder Altima ….
لماذا لم تقم بتصليح العطل الكهربائي
Because that’s not the issue. Thanks!
You could just replace the microswitch. they are about a dollar.
Can you add a new link the one listed does not open to item
I think amazon stopped selling it .. in the video look at the number on packaging and search online for it
@@johningrassia2381 It's in stock now.October 2021. Under the part # you have RK5842. $42 and some change for the two.
Where can I buy it
www.amazon.com/dp/B08L7TTSY9/ref=cm_sw_r_cp_api_glt_i_27M54GJR1AC4ECTCGMN0