Video nenà dostupné.
OmlouvĂĄme se.
Why does the Boeing 737 not have any landing-gear doors?
VloĆŸit
- Äas pĆidĂĄn 15. 08. 2024
- Paid promotion: brilliant.org/...
Have you ever seen a Boeing 737 take off and noticed that the wheels are still visible after the gear has been retracted?
In this video I will tell you all about the reason for this, the aerodynamic impact and some protection systems that you might not know about.
Enjoy!
To download my app, and chat with me, click links below đđ»đđ»
đČIOS: appstore.com/m...
đČAndroid: play.google.co...
Never ask a pilot a question unless you have plenty of time.
Precisely
@Vergolia Elcompa People at chernobyl didn't ask enough questions then
this comment is cute asf tbh
True, we get carried away, sorry.
Haha the last time I did, I got like don't know we don't design 'em, now please get off my plane so we can get the next flight prepared...
I never knew I'd be so interested in hearing an answer to a question I never wondered about.
lmao
This is because most things are fascinating, you just need a great teacher to make them accessible
There where he's very strong, is the moment he told us, right at the begining, the reason why they decider to take this solution. And the most of us pursuit the lesson watching the entire video, because of the torrent of precisions he give us. Master.
It always bugged me. In flight simulators, I fly the 737-800 most of the time, and I always hated seeing the gear.
â@@tomhutchins7495amen to this
20 years ago, on a 737 flight, the pilot notified passengers to buckle up, extreme turbulence ahead. He said he was going to try to fly to avoid it. The plane went into a roller coaster ride from hell as the pilot took the plane straight up, to where we were almost flying in the stratosphere, then suddenly turning into a speeding nose dive. This went on for almost half an hour - straight up, straight down. Passengers were terrified & screaming. I was new to flying but the guy sitting next to me flew often & said this was not a turbulence issue - it's something else. He was scared. The plane finally leveled out & we landed shortly at Newark. But my legs were like rubber, I was so scared & stressed I could barely walk. After deboarding, I was waiting at the gate for a friend to pick me up & overheard our flight attendants nervously joking & one say, "Thank God *pilot name* knew what to do - I wasn't up for a belly landing today!" Found out later, from a small plane pilot friend, that the landing gear was likely not working properly & the pilot was maneuvering/pitching the plane up & down to get them to drop. All was forgiven :)
Wow, good thing no one got severely hurt in the flight
Holy yeah, that would scare the life out of me, but I'd pick that over belly scraping a fuel-filled tube at jet speeds.
See the crashes in 2018-2019 ?
Sounds like many of my skydiving flights.
Should told it was to get the landing gear out, less scary than doing stuff like that for no reason.
Was on an plane who was able to retract the gear.
We was worried about getting it out and was told it just fell out then released but needed hydraulic to retract.
Worked on many 737's & was aware of the main landing gear brakes & hydraulic systems but I learned so much more from this video.
I mostly did APU overhauls, hydraulic troubleshooting, slat, flap & rudder checks & maintenance & on wing engine checks (fan & last stage t-wheel). Fun stuff!
I still look anytime I hear a plane flying.đđ
Thank you. Iâm a medically retired airline pilot, nearly 15 years since I left the cockpit. Thanks you for the good info. Itâs hard to believe but I had forgotten some of what you covered. Itâs amazing how quickly ones mid can dump information. Keep up answering some of these more common questions and being a great ambassador for pilots.
yep a great ambassador for boeings nose up nose down nose up nose down down down do....... plain
@@mokuzu993 he does a good job for the forest clearing A320 also.
@@mokuzu993 well when you fit new larger engines you alter the weight balance of the aircraft In the case of the 737 Max it wants to go more up so you correct that tendency with elevator pitch What Boeing did not do was execute this properly Be failed to insist that pilots were trained in this ; how it worked ; how to recognise and system failure and how to manually overcome any failure off the pitch control system. That failure to explain and train cost 2 aircraft and 350 lives .And if another 737 Max crashes in the next few years for any reason it risks the very existence of Boeing .potentially. It used to be "if it is not Boeing I am not going " -now it risks becoming "If it is Boeing I am very definitely not going " !!!
I'm a pecuniarily retired pilot and i can hardly remember the 12 things he told us to do to land a 737. I still remember the radio, oh and the full flaps, but what about the seat belt sign?
If you don't use it, you lose it
Unreal the amount of hoses and exposed stuff inside of that wheelwell.
Like maintenance renegade said, the intire landing gear and supporting systems like anti-skid valves ect. and a large area of the hydraulic system is accesed from the wheel well. Absolute bitch to work in tho
@Maintenance Renegade Dunno how it is on the 737 since I only worked on the 707 in training but I'm quite short (5"8) and some parts are hard to reach for me ;D. Especially the walking beam.
@Maintenance Renegade When the Aircraft is on the ground the landing gear tire is no longer covering the wheel well opening giving complete access all components. The original design engineers missed this feature and added a serving door for hydraulics (probably for an external hydraulic mule) which was generally never used and subsequently deleted. Debris generally enters the wheels wells when the gear is down (unusually on landing and thrust reversers applied). The perimeter seals mitigate noise and aerodynamic drag. The original bag seal material was attacked by residual hydraulic fluid residue and change order was issued correcting the problem with the present system.
I know they often have exposed equipment in military aircraft because of ease of access in case of emergency.
Looks scary as f*ck lol
I've been lying awake at night for more than a year asking myself this question. Now finally you have answered it.
bc it doesnt FUCKING NEED A LANDING GEAR DOOR
ITS SOOO SIMPLE
ikrrr
Very cool to see how different manufacturers tackle the same problems. I work on CRJ-200 and -900 and they have brushes instead of those flaps lining the wheel bays. Also they have "wheel bins" which surround the gear inside to protect structure and components.
My uncle was one of the primary design engineers for one of the planes in the 737 family. I believe it was mid to late 70's. I love to see some of these quirky ideas they came up with!
That's what I love about engineering--they found a solution to their problem that was as good as it needed to be but not more. I'm sure the small cost in drag was compensated for in weight (fuel $$) and complexity (maintenance and manufacturing $$)
In the 1980s (actually in the electronics industry, but exactly the same principle), I used to be the one who said things like, "Get rid of the doors".
Everyone thinks I'm completely mad. "We need doors" "Gotta have doors" "Ben's spent two years working on the doors, we can't get rid of his doors" "Get this guy outta here, he wants us to get rid of the doors!".
I persist: "Seriously, run the calculations without the doors. I think they'll work out. And with no doors, we won't have to solve the problems with the doors".
The calculations do work out. Ben loses respect. I gain it.
Heehee yX-D! But it's interesting even tho it could be said in two sentences y:-D
Exactly...! Designing has the biggest challenge up ahead which is not about the best materials and best performances to get out, but the best compromise. That's key to success!
Thank you, I have often wondered about this, but did not realize that even the most recent 737s use this system. Very used to seeing the 737-400s, but seldom anything more recent than that. Your videos are hugely informative - thank you.
Yep, even the latest MAX-series has it.
@@sprucegoose6933 The 737 MAX planes on ethiopian airlines and lion air crashes MCAS is programed incorrect.
Thank you. Having flown planes for over 50 years, I appreciate your videos and organized presentations.
Hi Carol: Have you written up your story anywhere? I'm interested!
This is one of the many reason why you should NEVER take for granted seeing these beautiful machines fly overhead!!
Just before getting on this presentation video, I watched a video of inside the well cam of a B737 in a take off. The moment the landing gear moved to come inside the well, the brakes were applied on the fast moving wheels stopping them instantly before they got inside the wheel well.
I was pleased to see you pointed out the same in your presentation.
Good eye. A landing gear hydraulic line that is pressurized only when the gear handle is in the "UP" position, during gear retraction, is also connected to apply the brakes. After the gear is completely retracted, the flight crew moves the handle to the "OFF" position, removing pressure from the retract cylinders and wheel brakes. The gear is mechanically locked in the up position until the handle is moved from "OFF" to "DOWN," at which point the gear extend side of the hydraulic actuators are pressurized. After the gear reaches the fully extended position, it is held in that place by both mechanical locks and hydraulic pressure.
@@Hopeless_and_Forlorn Thank you so much for sharing this information. I am amazed and I really appreciate your care. :)
It landed in St Louis, they were stolen.
The enginer was smoking pot the day he designed wheel wells
boat show đđđđ the lou do get crazy.
I thought they did that so they can save money...
đ
or Rome/Rio/Liverpool/Jo'burg/Kolkata/KL?
I love the look of the exposed tires beneath the 737. Obviously, itâs all about function, but itâs still a function that gives a distinctive, maybe more rugged appearance to the plane (like having a spare tire mounted outside of a SUV).
Haha I love that analogy
One of the first things I learned when I first joined Air Traffic Control was about the Boeing 737. It was built to be "self-sufficient" at smaller airfields. That meant that it could start it's own engines using it's on-board APU (Auxiliary Power Unit), it has it's own on-board mechanically operated stairs so it doesn't need airfield steps or the start up truck just the fuelling bowser. I think it can or used to be able to, power back off the stand without the use of a tug. A very forward looking design that has lasted decades, that's why it's still being used albeit in more modern guises. Another airliners that had their own stairs were the DC-9, the BAC 1-11 and the Boeing 727 if I"m not mistaken, all at the back of the aircraft between the rear engines. My friend was on a flight from London to Madrid once on a DC-9 when the back door/air stair seal blew causing an explosive decompression of the cabin. They landed safely but very shaken. Another good reason to keep your seat belt loosely fastened in flight when you're not moving around the cabin.
I don't know why ppl fret so much to wear their sear belts. Loosely fastened should be the way at all times. Ppl unlock their seatbelts the moment the seat belt sign is off, as if they are gonna get paid for it
@@coronarahul Same reason they donât get covid vaccinatedâŠ
Itâs outrageous! I mean my seatbelt has been locked on every airliner since iI did flight training and learned what clear air turbulence wasâŠ
Pretty amazing to take this chance at a time where computer simulation was a dream. They certainly had to spend numerous hours in wind tunnel to validate this design, to avoid drag and awful whistling noise, making the plane unusable. They saved weight and landing gear complexity, all my respect to the design engineers.
I had been told by a friend who works at Boeing that the exposed wheels increase survivability in the event of a water landing. If you look at the at-rest angle of the Airbus in the Hudson River incident, you will see that the plane settles alarmingly low in the water very quickly. Simulations at Boeing have demonstrated that, in the same situation, the at-rest angle of a 737 would place the floor of the cabin 3 to 4 feet higher than the Airbus. This is, my friend tells me, because of the exposed wheels. I am glad you have taken the time to correct this misinformation. Now I don't feel so bad about sleeping with his wife.
Great answers and explanations love the way you go into so much detail, Iâm not a pilot or have anything to do with working on aircraft but the understanding I get from your videos are great, keep up the good work.
Thanks for the video. I've heard that sound of the snubbers stopping the nose wheel spinning, after it was retracted, just never knew what it was. :)
Great! Now you know.
Never noticed it, though I do notice the Airbus "dogs".
I was in the Air Force, and a lowly First Officer in the KC-135. Heading toward Beale AFB, a 737 flew over the top of us, on the way to Sacramento. I helpfully told him that his main landing gear doors were missing. I thought the laughing would never quit.
LOL
Iâm not a plane enthusiast but I cannot stop watching these clips.
Very well delivered info on very interesting subjects.
Good job.
you are now, if you watching a lot of these clips....
Don't know how can 1.1k people dislike his video when he is explaining everything very clearly with images and videos.....!!
Really a hard working person..
I have the same question too. It s a simple clear explanation and it s about the reasons of the manufacture behind those design ideas , not his own personal opinion or something. What makes people unhappy, argue or complain?
I live nearest from the Airport in my city, and some days ago i saw an 737 and i was thinking why the wheels have not doors, thanks a lot for explain it! Im from Silao Guanajuato MĂ©xico.
Excellent piece, just like the rest of your videos. Thank you SO much for doing these! As a total airplane junky, I love this sort of easily digestible education.
I'm scared to ask for he long explanation.
Speaking of the 727, I remember many years ago I flew first class in an old 727. Since the engines were way at the back of the plane, the take off was the quietest I've ever experienced.
Yep, great for the people in the front, less great in the back :)
Yeah, those old engines were noisy af! lol
It's quiet for those in the front of the plane, but definitely not for those at the back of the plane or on the ground outside. In fact, it seems that tail-mounted engines are MUCH louder than their wing-mounted counterparts, even ones that appear to be the same size and from the same time period. I wonder if there's a scientific explanation for why that is the case, perhaps having to do with the sound waves bouncing off each other and amplifying. Could this explanation be a future Mentour Pilot video?
Glenn, the main reason tail-mounted engines seem louder is because they are indeed louder -- they're earlier-generation engines. They were either turbojets or low-bypass turbofans.
JT8Ds... low bypass turbofans.
I just found your channel but your videos are extremely informative and comprehensive and you get sraight to the point. I love videos like these. I hope you continue making videos as you're a role model for many young aviation enthusiasts like me :D
I love how you can make giving the answer âbecause thatâs how the Boeing engine engineers design itâ last 11+ minutes. Lol
Well in reality he is answering the question "Why did the Boeing engineers design is like that" which is much more interesting than what amounts to "because I said so"
You need to stretch the video beyond 10 minutes to put midroll ads in.
thank you for the explanation Mentour Pilot. I've been working in the ramp for 8 years now and I have this same question. Now I know the answer. Good job sir
Thank you for explaining this. I've see 737s fly over head so many times, and I've noticed that I could see the wheels, but didn't think it possible from an aerodynamic perspective. I thought maybe they painted black circles on the landing gear doors, but that didn't make any sense either.
Yes! And this is the reason.
I hope you liked the video!
If given the opportunity I would totally paint weird stuff on the bottom of a plane.
The 737 variants milked the airframe to its limits, it is time for a totally new design, with a decent landing gear height to begin with
Whatâs your point?
Agreed 100%. Now they created a contraption so the Max-10 could be some inches taller. Ridiculous.
â@@tomdavis3038no point explaining as you won't understand
Only mentour can turn such a seemingly basic concept into an 11 minute video. Earned a like!
One extra step when changing the outboard tire/wheel assembly because of wheel fairing. Also wheel nuts are not visible on walk around inspection before flight. Not great. But it works.
Glad I stumbled on this. Thank you for in-depth explanation. Very interesting!
Great to hear! Iâm happy you are here.
I am so pleased that I read this, because I was thinking about buying o e of these to fly the 3 miles to work each day. But the hub caps have put me off the purchase. Yobs nick hubcaps down my road.
This is not the in-depth explanation. It is the executive summary
I like you very much. You offer very good and clear explanations. Keep feeding us with more videos. Big thanks to you!
Thank you! I will do my best!
@@MentourPilot No doubt by now someone has suggested this, but I'll make the point anyhow. For instance, much of Northern Canada airstrips such as in the Yukon or NWT have been mostly gravel strips and the 737 was able to land and take off from these strips with only slight modifications to add rock deflection above the nose wheel. I suggest that the 737 aircraft was one of Boeings best short field models ever produced.
saju mathew
I discovered this channel a week ago and it clears all my doubts,and am very keen to watch the vedios,thank you Captain....
You answer the question and answer every question related I would have asked regarding it.Bravo!Thank you for your knowledge and willingness to share Sir.
Do more of this untouched stuff in aviation more than the popular stuff. As always the video was absolutely fantastic just like you. No suggeations on quality of vids coz its best :)
Thank you!! Iâm so glad you like them! I will continue!
Damn that's a lot of pipework
Scitimar that's what she saidđđ
@ John Beer LONG is good, many might not be! lol Take it from a horse. :)
The B737 main wheel well doubles as the planeâs nervous center. A separate compartment for such task didnât fit in the 737 elsewhere because itâs a such small airplane and thus they had to combine main wheel wells with the nervous center into 1 compartment.
First thought was, "messy data centre" :D
Mostly hydraulic systems.
not much extra drag [hub caps in place] less the weight of the doors and equipment.
less time in the repair hanger too.
Correct!
Mr. Mentour Pilot, what is your name? This video brings me alive, I was an aircraft mech on the A7-B's during Vietnam. I was an AMH, structures mechanic, and good too. Boeing tech specs, OMG!!! Bring 'em on!!
it's amazing to think how Boeing engineers designed 747s and 737s decades of years ago.
Yep, they were some seriously smart people. I love how they though âout of the boxâ when designing.
could you make a video explaining different autopilot modes? Like Level Change, Vertical Speed, LNAV, VNAV ,etc?
So smart they even thought to include coffee cup holders in the cockpit.
Mentour Pilot Little wonder Boeing is contracted for defense then and now. Though I canât help but wonder where innovation like that happens today, seems very esoteric âčïž
FlakeTillman SpaceX
Tyre pressure : I am under the impression that it is around 200 psi. You mentioned 14 psi which is half of what I have in my car tyres.
He probably meant to say 14 atmospheres đ€
@@jonathanmoreno1945 Thanks. :)
@@Amonginsanity 14 psi is maybe correct, you want a low pressure to have a good contact patch to the ground. Drag of the tyre is not a major concern here
@@guigui045 Sorry ... 14 psi is not a correct figure. The correct figure is 200 psi which is equivalent to 14 bars pressure.
Thanks for your comment though.
@@Amonginsanity yep, i've checked and the impact force of a landing building is mainly why theses have such high pressure. Thanks for correcting me ;)
As far as stuff entering the wheel well's when retracted, I'd be more concerned with stuff entering the well's when the gear is down during taxing or take off , like rain, slush, snow etc.
ROCKS and stuff thrown up from the tarmac!!
Or Stowaways.
About the fuel efficiency issues, think of it this way: You have slightly more drag but at the same time you ditch the weight of the doors and thus in total, the fuel efficiency remains the same as if you added a bit of extra weight and reduced a bit of drag by adding doors
The drag isn't "slightly more" and the door probably doesn't weigh enough to create the difference. I'm no engineer though, so I might be wrong
Very funny. Great details and your straight face. That shot of all the tubes in the wheel well is damn scarry. Appreciate the inserted very clear pictures. Every followup question clearly answered. Love these super technical trainings. OH.... do captains routinely know all this or did your research this topic?
Thank you very much for your service, Captain Petter!
Thank YOU for supporting the channel my friend.
The landing gears on the C5 Galaxy is something, amazing to not hear of many problems with this setup.
Love all the complexity they added after deciding doors were too complex
Nice to see some video's about construction of an aircraft. That's a different approach.
Great to hear that you like them.
Very informative for any flight student or otherwise, GOOD Share......God Bless
Thank you! Im glad you like my little videos.
And people think my work in industrial Instrumentation and Control Systems is intricate and complex? Thank you for a detailed and rational explanation into one more engineering design decision.
I'll make certain that I watch all of your videos before I ask any more questions! No manual brakes needed! Thanks Mentour 360!
You should read about the nose gear and the main gears of the space shuttle. On landing, there are pyro charges to make sure the gear doors open up. On one landing, one of the main tires blew while the shuttle was coming to the wheel stop. This happened only one time when landing at Kennedy Space Center.
This channel answers so many of my questions I never even asked! Simply amazing!
Peter, I love the 737 and have flown in it more than any other aircraft from the 737-100 to the 737 Max. The United and Norwegian pilots knew how to fly it, I wonder why the others didn't have the training on the system so they didn't have the episodes that led to their crashes? I love your very informative videos. I wish I could be a pilot but at 56 it's a little late in the game to pursue that path. I love at least learning and you are a great teacher. Thank you for creating these videos.
Dude!! I am so loving this video series Answered so many questions I have always wanted to ask!!!
i never even noticed that they dont have doors. interesting :) btw i always find it funny how low-tech some solutions are in the aviation, and space/military world. some rubber things to stop the noseweel motion and to seal the compartments...shows that the simplest way often is the best one in engineering :)
Engineering is about asking the right questions. Once you identify what performance/design criteria you really have for something, you can boil it down to its simplest parts and go from there.
Digi20 I guess you NEVER LOOK UP, that was the1st thing I noticed when they came out.
Never noticed. After all the wheels are down when they are close and on the tarmac . However next time I see a 737 circling Iâll get my binoculars. On second thoughts I am not that interested. One thing , the Stuka : why did it not have retractable wheels?
Less to fuqupp is a good thing.
KISS -- Keep It Simple, Stupid
This should be applied to software, also. But it seems that such is made complicated on purpose these days, because... Gee Whizz!, would you look at that! Bah!
(I'm a software/network guy. But I started in Electronics. And should probably have done Mech. or Industrial.)
@@peterdavidasige8073 helps braking the dive during bombing and stabilizes the diving attitude
Interesting video with a good explanation of why there are no doors on the MLG. As for the exposed tires, I wouldn't think anything would happen to them as there have been many other aircraft designs that have had exposed wheels. WWII aircraft may not have flown at speeds of today's modern aircraft but many flew at altitudes at 30K + with no problems of the wheels or tires exposed to extreme temperatures. The B-17 didn't have any landing gear doors and the tires were filed with compressed air, nothing much happened to them due to altitude or temps. Flak and Fighter damage was another problem, but not having landing gear doors eliminated weight and problems caused by damaged doors. But Boeing has always build superior aircraft, built like tank armor.
As for icing on the underside of the wing, I've seen this only once on a B-52 Bomber. I doubt that it formed during high altitudes, but rather after it was at lower a altitude or after it landed. I was stationed at Seymour Johnson AFB and we had a B-52G that had just landed with some mechanical problems. It was summer, very humid and the aircraft was very cold from flying at high altitude. When I got out there the underside of the entire aircraft had a thick layer of frost and some ice. But like I said, it could have formed at landing speeds, at low altitude or after it had landed during taxi.
Given what we know now, I think it's safe to say that Boeing definitely do not build superior aircraft.
Amazing video very educational. Unbelievable how many hydraulic lines inside that wheel well.
Thank you for another very informed, educating and interesting video. I am a retired Engineer and can't get enough of this sort of thing! Oh, and by the way, I think you meant 14 bar, not 14 psi when talking about tyre pressure.
Great video as usual. We call the Citation X the âCitation Tenâ FYI.
The coolest part of working at an AMO is watching gear swings. The whole action of the gear being sucked into the belly of the beast is most impressive, and seeing a whole aircraft being held up by only three jacking points is a little daunting.
I never really took into consideration why they wouldn't have doors over the wheels. But less weight makes sense and reducing complexity as well. Plus I have recently done rigging of the MLG doors and it is a huge pain in the butt. So from a maintenance stand point, one less gear door to rig is better too.
So many aircraft have this solution and some don't even have fancy hub caps, like the CRJ, Challenger, and ERJ all have exposed wheels and lack hub caps. So it must not be a huge deal aerodynamically.
Okay, I'll be the one to ask the dumb question. How well does a plane land with one or more flat tires?
Donald Clifford i dont think that is a dumb question at all, but a very curious one for sure. It is not an easy one to answer either, because of one main factor is that landing gear on aircraft vary so vastly.
One thing is for certain, that commercial aircraft manufacturers employ multiple levels of redundancy. Thus you'll note that many commercial aircraft have multiple tires on the main landing gear. If you lose one per axle it's a concern but the plane should handle it well as long as the pilots dumped a significant amount of fuel to reduce weight.
It might not be the smoothest landing ever but some might jokingly say that any landing you can walk away from is a good one. Maybe check out the JetBlue incident at LAX when they had a nose landing gear not rotate fully on deployment and on touch down it sparked and screeched to a halt, but ground the whole front tire assembly to a pulp.
Waldek: I assume if we fly regularly, we probably land with at flat once or twice, and never notice it. Commercisal air is amazing in its safety record. Thanks for the reply.
Donald Clifford you're likely right about that. You'd never know about it as a passenger.
I have to agree. Watching a nearly 2 story high 777 landing gear retract in a couple of seconds really gives you a sense of how much energy those hydraulic systems have.
I was always wondered why the 737's main gear was exposed. Now this video answers me. Thank you!
I enjoy listening to talented and knowledgeable people ...that is YOU!!!
Beautifully explained.....Good Job
Thank you Yasir!
Always enjoy your videos, your range of knowledge is admirable!
Great video. You are good at explaining things.
Tires are filled with Nitrogen. PSI depends on 737 series. Between 200 and 230 for the 737 Max. When servicing these tires itâs best to stand away just in case they blow up.
I got confused when he said 14 psi I figured it would be a hell of alot more
Really it depends on the tires the airline decides to use, but 14psi is hella low đ
@@Radim0303875 no. Its dictated by what boeing says is required, it's not up to the airline.
Not a pilot and don't fly at all, but still I have found this series extremely interesting and informative.
Me too! But I have flown all over the world. :)
Well done for taking time away from your off duty moments and creating these videos. Very much appreciated.
Love these video's. I wish they had been about when I was still young enough for flight training. Thanks Peter. Keep up the good work
They should have put some sick spinners on those hubcaps.
Chrome spinners!đ
That little hydraulic fuse is called frangible fitting and it's function is slightly different than in your explanation. Since small punctures might not come out, there would be no meaning to it if a nail is stuck in the tire but it may miss to hit. This fitting is for burst tires, which remainings would uncontrollably fly, or rather flatter around the spinning axis of the wheel during gear retraction. If the fitting is hit and cut open, it releases the hydraulic fluid of the returnline(two sided gear extension/retraction cylinder) so that no pressure on the retraction side can build up and the landing gear will fall back to the extended position and be overcentered/locked(down three green) down. :-)
Also, there is another feature for protection of the wheelwell equipment; selecting the gear lever to up will cause a signal from (correct me pls., i'm not 100percent sure right now about the box-type rating was years ago and i'm not working on b737 anymore) auto break control unit to the antiskid control valves, who open the return line of the antiskid valves, resulting in a braking function during gear retraction and open the brake metering valves for providing brake pressure, thus called gear retraction brake. Sorry for that wall of textđ
Thank you! Thatâs an awesome point to make!
Sometimes I over-simplify the explanations a bit in order for everyone to follow.
Mentour Pilot you're very welcome, simplifying is not wrong, since not everyone can grasp the ideas right after hearing them đ
What a great attitude to take, rather than jumping in with an agressive defense - I can see why you have the job you have - I'd love you to captain ALL the flights I take in the future.
Hamburger Quieddje I like Pizza
That's good. I don't trust people who do not like pizza.
I love this channel man, I'm not a pilot but I do love mathy things so aviation falls into that well. This guy is seriously fantastic as explaining the technicalities. I get as much enjoyment out of watching this channel as I did watching MC videos when I was 14 years old. Really cool!
I attended a talk by a Boeing engineer regarding all the effort that went into the design of the winglets for the Max. The improvement in the aerodynamics was not large. I kept wondering if they might have had a bigger improvement by just putting doors over the main landing gear.
Really eh sometimes I wonder if they trying to look modern Iâve heard differing opinions on winglets some deadly unfortunately
0:14 That sir, is a wheel boot. You obviously parked your plane in a no parking zone or had a bunch of tickets you hadn't paid and so the parking authorities placed a boot on your wheel to force you to take care of your parking tickets before they will remove the boot so your wheel can freely rotate again. Happy to help, and just let me know if there are any other questions I can answer for you.
Wow Petter very detailed explanation... amazing video!
Thanks so much!
Thank YOU for your support!
Excellent video and answer to the question. It never occurred to me the main driver behind the lack of wheel doors was the height of the aircraft when the gear was extended (and the complexity to engineer such a solution for that scenario)
I had the misfortune to be a Captain on the NG and Max for 10 years. A truly ghastly, unstable, noisy, cramped aircraft so inferior to the Airbus product that if the 737 was a fridge it would have been banned. As they say âŠ.. never trust an aircraft with hubcaps. Great video and series by the way.
Because the Boeing landing gear designer loved the Grumman F4F Wildcat and Brewster F2A Buffalo.
I usually love, appreciate, and find honesty in everything you say.
This time is no different!
Thank you,
Dale
I would've expected the wheels to retract into a basically bullet-proof, air-tight compartment. But probably the fuel savings are more important than the added weight.
The hydraulic fuse is called âFrangible fittingâ
An advantage of exposed wheels is brake cooling. There was a hull loss disaster in Switzerland many decades ago when a pilot used his brakes and turbines to clear fog off a runway. The brakes overheated and caught fire after in flight after the landing gear was retracted, bringing down the plane. Reminds me of the comment by the Engineer who certified the 747-100 for use in UK airspace which was "as a Chief Engineer with an airline, one would be forgiven for assuming that our profession is inhabited by professional pilots and not circus clowns!", or words to this effect. It was inreference to the finding that certain US pilots were using flaps in cruise for some reason I forget now, contrary to Boeing procedures? Maybe a smoother ride? The moral to the story - use turbines and brakes as they were intended, not to clear fog off a runway prior to departure. So no gear doors mean cool brakes - which is always a good thing. Anyone who has witnessed over heated brakes will attest to this fact. Heavy jets have emergency type brakes which can aborb by necessity an enormous amount if heat energy, but the downside is they take a long time to cool off!
Thanks; that's very cool to learn about! And it's great that Boeing has those scrappy engineers: very practical minded.
Cut to the 737max
You're videos are always such amazing, they teach me so much about aviation!
Great to hear! Iâm happy you like them.
:) You're simply the best!
'The Boeing 737 is an American short- to medium-range twinjet narrow-body jet airliner.'
Boeing 737s are used primarily for commercial aviation. A major advantage of the 737 over its earlier predecessors is that it can land on and take off from smaller runways.
The Boeing 737 has two variants, -700 and -800. The -700 is 69 meters (227 ft) long and can carry 150-186 passengers depending on seating configuration.
The Boeing 737 has many advantages over the previous models like the Boeing 727, 737-200, 737-300, 737-400 and others. Some key points are:
it was designed with lower operating costs in mind
it has a lower capacity than the Boeing 747, but also uses less fuel so operating costs are lower as well as maintenance costs
The Boeing 737 is a very cost efficient aircraft and its low price tag compared to other medium range jets allowed airlines to purchase large numbers of them. The first Boeing 737-100 was delivered on December 28, 1967. The -300 model was introduced in 1968 and had a longer fuselage and greater capacity than the original design.
-100 models were built until 1987 while -200 models were built from 1982 to 2000. The -400 model entered service in 1987 and is still currently being manufactured today.
737 CA here, great job professor! đ
I think you made a minor error. You said the tires are inflated to 14 PSI. Perhaps you meant 14 Bar, which is near 200 PSI.
Yes, that sounds correct.
205 (+ - 5) psi
Mentour Pilot 225 for -900
I have no practical experience with aircraft but as a mechanic 14 PSI sounds a lot more reasonable for a tire that size.
brocktechnology A can of coke has about 50 psi... In fact, atmospheric pressure at sea level is 14.7
Another GREAT video Petter, thanks!
Thank you! Iâm so happy that you guys seem to be enjoying these little videos.
I had no idea actually and never noticed that the wheels were exposed! How interesting.
One thing I would be wondering about would be cabin air pressure, and potential drastic differences.
Let me give a little background here. A little over 30 years ago, I was down in Acapulco for Spring Break in high school. On the flight back, in a 737, I found myself becoming light-headed and disoriented, to the point that the flight crew needed to administer oxygen to me. As soon as we touched down at the airport and I met my dad, I could tell that things were not right: my balance was off, I had trouble hearing, etc. For the next three weeks, in fact, I was having trouble walking, to the point that someone who didn't know me would have thought I was drunk. (Thank goodness I had such a good rep at school, and that my teachers all knew me and that this was NOT the case.)
So, I went to see my doctor, and then a hearing specialist. What had happened was that my left inner ear had collapsed due to a sudden change in air pressure. My dad, working for Wardair Canada at the time in the computer center, told me how the 737 at the time had a reputation for lousy air pressure. Also, as a child, I had frequent ear infections, and the specialist mentioned that it was probably a contributing factor. (He noticed all the scaring on my ear drums, and when I told him I had been flying back and forth 4 times a year for about two years to a boarding school in the US on 737s just a few years earlier, he told me it was a good thing it did not happen then.
So now, I've had very little hearing in my left ear since then. Fast-forward to last year, and my sister's destination wedding in Jamaica, and I was rather worried when I found out we would be flying on a 737. Luckily there was no problem, but I'm still worried if I ever want to fly again. Are the newer models of the 737 considered to be safer then those of the past, or do they still have that issue with air pressure in the cabin?
A friend of mine is deaf in one ear, similar experience. A background with ear infections will predispose you, it can happen on any type of plane. No-one in her family will get on a plane without taking a decongestant for eg with pseudoephedrine in it. If your sinuses and ears are clear, the probability is dramatically reduced. If it's a long trip [and your doctor says its safe because disclaimer I'm not a doctor], I take one just before boarding and another one just prior to landing.
Hey, ! Please make a video about the escape chutes for emergency evacuation. How they are folded in their tiny boxes, what inflates them, etc... Thanks in advance. Take care and stay healthy.
The escape 'chutes are only for the crew, so us passengers don't need to know about them.
How have I only just discovered this channel! I love this content!
Excellent! Welcome to the channel!
One of the best on CZcams IMO :)
Outstanding. You explained everything in an easy to comprehend way. Thank you.
fick precis svar pÄ nÄtt jag undrat över i minst 10 Är :P haha tack sÄ mycket :D
I have been following Captain Joe for a while for his A320 videos and find them sooo intesresting. And now I recently found your equally interesting series about the Boeing 737. The A320 and the 737 are the aircraft I fly most often in my travels so I like learning about the internals of both aircraft. What if both of you (don't know if this it at all feasible) join at simulators and try to fly each other's aircraft. Would be quite interesting to see you flying an A320 and Captain Joe a Boeing 737. It seems that each aircraft is quite different from the other.
Sounds like a great idea!
I wouldn't fly on a Scarebus for free to anywhere!
While Capt Joe was flying A320s, I think he might be flying 747s for freight service now. At least that's what remember hearing in one of his career updates.