Learning To Spray: How To Get Started (Simple & Easy)
Vložit
- čas přidán 25. 04. 2024
- If you enjoyed this video or my content as a whole, please, please, do consider becoming a CZcams member or a patreon member to support my work here on my channel.
This will allow me to keep investing in the channel and create more educational woodworking content
As you may know, my Joinery business making Bespoke Fitted Furniture (The London Craftsman) is my main job.
It takes alot of effort to plan, film, make and edit each and every video (as I do it all on my own), giving away everything I know and have worked for over the last +25 years, for free.
Any paid member will get Priority fast replys to any questions asked in the CZcams comments or Patreon messages.
I will be happy to help and answer any queries and questions you may have, and as many as you have.
Link to JOIN my CZcams Membership:
/ @thelondoncraftsmanwor...
Link to become a Patreon Member:
patreon.com/thelondoncraftsma...
Link to donate a small thank you:
Paypal donations - PayPal.me/TLcraftsman
Thank you!
Hi everyone!
Welcome to another Video.
This one in particular is about learning to spray paint through an Airless sprayer.
I show you all the equipment needed, such the Graco 595 Airless sprayer, variavble fans, home made spray filters, turntable, racking, heater & tons more.
Not only that, I alsoo show you how I spray in 4 different viewing angles, and give you tons of advice and information about spraying as I spray.
I am using the Vernites 1K paint from www.amicus.co (Based in Rark Royal, Uk).
It it a fantastic paint and the best you can buy (waterbased).
Please contact Rob, you can find his details through his website and he will give you advice on the best paint for you.
I hope you find it educational and I hope you enjoy!
PS The special Playlist I made is called 'Learning how to spray (special mix playlist)'
If you found this video helpful, please Like, Share, Subscribe and JOIN our membership (Details above).
Enjoy The Video
Ryan Cooper
LINKS TO TOOLS, MATERIALS & WEBSITE USED IN THE VIDEO OR PREVIOUS:
(I may recieve affiliates for any qualifying purchases made through my links.
This is a great way to support me and my channel without costing you extra)
SPRAY EQUIPMENT
GRACO 695 ULTRAMAX 2 AIRLESS SPRAYER - amzn.to/2O7HDJp
GRACO RAC X GUARD - amzn.to/34tVFuo
GRACO 310 FINE FINISH LOW PRESSURE TIP - amzn.to/2PIMQHC
SPRAY BOOTH TURNTABLE - amzn.to/35oNj8v
SIP SPACE HEATER - amzn.to/30ADvq9
SPRAY FILTERS ON A ROLL - amzn.to/2TyIlTz
TWIN SLOT SHELVING UPRIGHTS - amzn.to/2uTXapl
TWIN SLOT SHELVING BRACKETS 10 PACK (370MM) - amzn.to/38l76H2
PIPE INSULATION (TO PROTECT SHELVING BRACKETS) - amzn.to/2tjUK37
400MM ADJ SPEED EXTRACTOR FANS - amzn.to/2TCfBJK
CHINA TOOLS
UPGRADED PARALLEL GUIDES - www.banggood.com/custlink/GmD...
ADJUSTABLE TRACK SAW SQUARE - www.banggood.com/custlink/mKv...
HONGDUI CHAMFER PLANE - www.banggood.com/custlink/mDm...
200MM CARPENTERS SQUARE - www.banggood.com/custlink/33K...
300MM PRECISION SQUARE - www.banggood.com/custlink/m3m...
300MM ANGLE T SQUARE - www.banggood.com/custlink/vmK...
600mm ROOFING/CARPENTER SQAURE - www.banggood.com/custlink/D3K...
ALUMINIUM HINGE JIG - www.banggood.com/custlink/3vKEQHIQgd
POCKET COMPASS - www.banggood.com/custlink/333...
DRAWER/DOOR HANDLE JIG - www.banggood.com/custlink/KKv...
DRAWER/DOOR HANDLE JIG - www.banggood.com/custlink/3vv...
GUIDE TRACK SAW SQUARE (BUDGET) - www.banggood.com/custlink/KK3...
ATOMSTACK LASER - www.banggood.com/custlink/mDG...
TREND TOOLS
TREND BISCUIT JOINTER BLADE - amzn.to/4cMkbet
SMALL FINGER PULL CUTTER - amzn.to/3GAMaAh
MEDIUM FINGER PULL CUTTER - amzn.to/3EqsMD6 (USED IN THIS VIDEO)
LARGE FINGER PULL CUTTER - amzn.to/3OmNZmf
TREND ROUTER TABLE - amzn.to/3TS7Omz
TREND T14 ROUTER - amzn.to/3hZDkl1
TREND T35 HOOVER - amzn.to/3V9Q3jn
OTHER WORKSHOP TOOLS
HYUNDAI HY55 COMPRESSOR - amzn.to/3PwujMm
VIRUTEX AG98F EDGER - amzn.to/3MbHroc
PAIR OF BESSEY COPY WRATCHET CLAMPS - www.banggood.com/custlink/K3G...
1.6MM RADIUS - MICRO ROUND CUTTER FOR 1/4" ROUTER TRIMMER - amzn.to/3cTCYW6
MAKITA ORBITAL SANDER - amzn.to/2TIkUqK
CTS HOSE KIT - amzn.to/3FCLXIL
MAKITA HOOVER - amzn.to/3cvNl3p
MAKITA CHOP SAW / MITRE SAW (LS1019L) - amzn.to/330BcCF
MAKITA ROUTER TRIMMER - amzn.to/4aHU7Ql
JIGSAW - amzn.to/2R9z7em
POWER DRILL - amzn.to/2V2SGWT
MITRE FAST SPRAY GLUE - amzn.to/34pvYem
35MM HINGE CUTTER - amzn.to/2POJR09
250mm TREND 48T BLADE - amzn.to/3aq2pgI - Jak na to + styl
Thanks
Thank you very much for the super thanks, it really is appreciated 😊👍
Cheers ryan 🙂
Great video Ryan . I will build my workshop very soon and the spray booth will be inspired from your one . Greetings from Romania
Ahh hello!
That's great! I'm glad its helping and give me a shout if you need more information on what to buy when you do 👍
Cheers ryan 👍
@@thelondoncraftsmanworkshop Great, thank you 🙏
@valentinointeriors3023 No probs at all, enjoy your day 👍
fridays work for me...nice video it shows that you can get a LOT done in a short period and still get an excellent finish thanx rick
Hey Rick!
Glad to hear that 😊
Yes, it's ridiculously quick and great finishes too, so a win win 👌
Ryan thanks for the tips and demo.Well organised as usual. I’m just a hobbyist so it’s interesting to see how it’s done large scale. Can I ask when you did use rollers back in the old days 😂. Did you ever water down the Johnson’s a little or straight from the tin. I’m priming with leyland acrilic water based. Any tips to use when rolling with the last top coats. 👍
Hey!
Thank you!
Oh yes, I did the roller thing for a while, until I got sick of it... it took days to paint a whole wardrobe as components, hence going airless and never looked back 😊
I don't think I ever watered it down.
I remember with my topcoats I used a 9 inch gloss roller (prodec).
I applied the paint over the whole surface, then let the weight of the roller glide over the painted surface over and over until I had a flat finish or the best finish I could get.
I also used a short pile 9 inch roller before that.
It put it on heavier and I still got decent finishes. I j7st let the weight of the roller do it's thing again over and over until it was flat.
👍👍👍
Do you normally fetch your components 1 by 1? Make it much quicker if carried several & stack up near sprayer.
Hi.
To be honest, no.
The wooden bench I put my brush on in the vid, I have 2 of those.
I generally put them side by side next to my sprayer and stack materials there.
I think Sean stacked them away as he knew I was filming and needed it clear in the booth area for filming 👍👍👍
Thanks Ryan, this was a cracking video
Ahh cheers maty.... I'm trying to dona variation now. Next week is likely to be an under stairs shoe unit build 👍
great video, interesting Kieth - R&BB released an understairs storage this week, my son-inlaw built a pull out understairs unit - so you pulled out into the hallway and had shoes on - worked really well
Thank you, and sounds great!
This one next week is just one giant drawer that pulls out completely.
👍👍👍😊
@@thelondoncraftsmanworkshop cool, sounds similar to my son-in-laws look forward to see that one over the weekend
Thanks Ryan do my first spraying tomorrow 😮
Oh wow, how cool! You'll never go back to the roller once you start 😊👍
@@thelondoncraftsmanworkshop thanks Ryan. I’ve made by debut, nervous as hell before I started, best thing to do is just get stuck in!! Your channel has taught me a lot. I also get the little walk whilst you’re spraying now!! Started off holding the gun to close to the board but holding back 250-300mm now giving a better finish. Keep the videos coming 👍👍 don’t forget when your over for the TT give me a shout
Great new start time!!
Cheers mate! Let's hope it does well at this time 🤣
Good video
Amazing to hear thank you 😊👍
hi Ryan, do you have any recommendations for paint sprayers for someone who just does small jobs here and there but also wants a good finish. I'm looking to move from roller into spraying
Hi!
Well the best basic machine if gojbg for graco is the gxff )with hopper) or gx21 (without hopper).
I'd always go graco, wagner and other brands are mainly cheap plastic rubbish.
Cheaper graco versions are mannky gimmicky and probably not what you want, so I'd say either of the above or the 390 pc if you want to spend a bit more.
You can always buy used too 👍
I’m sure you said in another video that you just spray 2 coats of eggshell and don’t bother using a primer coat. I’ve tried the 2 top coat method and so far it’s worked a dream. When would I need to use a primer coat first?
Well technically you should use a primer.
A primer is so the top coat/s sit nice and flat on the wood/mdf/ply, without sinking in etc.
So by using the topcoat as a primer, basically you need to sand it until you think its as smooth as it can be, and without going back to the wood/mdf/ply etc.
A real primer is designed to do this very well, but i manage to sand back the 'top coat/primer' (the first layer of top coat paint), really well, hence sticking to this system.
It works for me :-)
By the way, I am trialling new paints.
This video is showing the paints from Amicus uk. If you want to try these, give Rob a call or email, and he will give you some advice on some waterbased 1K paints, which I have been finding to be absolutely amazing and rock solid.
Just mention my name :-)
Cheers
Ryan
Brilliant video. Would you recommend the gxff for a hobbiest for spraying furniture or something else?
Thank you so much :-)
Yes I would say it is...
It has the hopper on it, and think most hobbiest/diyers like this as they can just pour in half a litre or a litre etc, rather than needing to buy a bigger 2.5L tin etc with the non-hoper style versions.
The pump on it is smaller than say the 390, but itll still do a huge amount of work before the pump needs a service/changing etc.
I have put a link here as an example of the next sprayer up in terms abilty, the 390. Also check out used machines, always bargains out there.
amzn.to/3xWGCOb
Cheers Ryan
@thelondoncraftsmanworkshop thanks for your help. Thinking of maybe grabbing one at some point as latex paint is not brilliant in hvlp. Would you consider the air assisted airless or do you think the results from airless with a fine tip is good enough?
Been watching your videos for some time now, good job! But, please tell me you know it's not pronounced John Stones🙈
Cheers mate :-)
Well technically it is what you said, but without the space inbetween lol.
Maybe it sounds like im saying it in 2 words in the film lol :-)
Johnstuns.... Thank you for all your videos, have really helped me with my wardrobe build
If u don't mind can I ask u 1 question did ever use sayerlack new water base furniture paint
To be honest, no... but I've heard this paint is better.
So far I'm super happy with the Vernites from Amicus UK, pretty amazing finishes I'm getting so far 👌👌👌👍
@@thelondoncraftsmanworkshop thx for answer I will deffo try because I like your fnjsh I get fed-up 2k paint be honest and I am following u which is u using paint coverage and fnish looks fine 1 more question the fnish when you touch its surface hard or feel like soft or plastic I am sure u understand what i am asking:)
Cool, well of you do buy this paint, ask to speak with Rob, and mention my name (Ryan).
He may give you some discount if so 👍
Ahh the paint is rock solid. Totally hard. You won't be disappointed 👍
@@thelondoncraftsmanworkshop nice to meet you Ryan thx for all information deffinetly u will buy and try thx for all ur information
@yavuzhocaoglu8568 you are welcome 👍