HUGE 3D Printed Death Star Pumpkin! Comgrow T500 Print!
Vložit
- čas přidán 9. 11. 2023
- Gear up for a build that's out of this world as I 3D print a colossal Death Star pumpkin at almost 500x500x500mm. In a thrilling dash to the Halloween finish line, I enlist the new Comgrow T500 to push the frontiers of consumer 3D printing to their limits. Will this galactic superweapon be operational in time for the spookiest night of the year? Join the adventure and find out if we'll have a glowing gourd ready to eclipse all others this Halloween!
---------------------------------------------------------------
Comgrow T500 0.8mm Cura Profile: drive.google.com/file/d/1-ydv...
Printer:
Comgrow T500
Direct: www.comgrow.com/products/comg...
Filament:
SUNLU PLA Plus Filament: amzn.to/3FUHhjG
Galactic Armory Death Star Pumpkin Candy Bowl: galacticarmory.net/products/d...
Buy my NEW t-shirt!
Short Sleeve: amzn.to/3NVZnaq
Long Sleeve: amzn.to/3I2qNrq
---------------------------------------------------------------
Journey with me. If my video resonates, a like, share, or comment would be appreciated. To be notified of future videos, simply hit subscribe.
For Amazon Links: As an Amazon Associate I earn from qualifying purchases.
Other purchase links may also be affiliate links.
---------------------------------------------------------------
All music courtesy of www.epidemicsound.com
@epidemicsound
---------------------------------------------------------------
You can support my work monthly (or yearly) on Patreon:
/ kerseyfabrications
You can support my work via one-time PayPal donations:
www.paypal.me/kerseyfabs
Where to find me on Social Media:
Facebook: / kerseyfabs
Instagram: / kerseyfabs
Twitter: / kerseyfabs
Contact: kris@kerseyfabrications.com
You can send me fan mail!
Kersey Fabrications
5885 Cumming Hwy
Suite 108-262
Sugar Hill, GA 30518
Privacy Policy: drive.google.com/file/d/1zEBG...
Terms of Service: drive.google.com/file/d/12SaT... - Věda a technologie
:-) your video with the BIG printing is incredible.
Thank you so much!
Kris, quite a challenge, one that I often attempt. Some thing I learned is to think of the problems you will encounter and try to start early. I'm working on Christmas now, so I can learn and improve on my early mistakes. Love the clock in the top background.
The clocks are always somewhere around the shop. I've had to move them as I reorganize but they're so nice to have sitting on a shelf. On this project, I did get started too late but it was a last-minute idea I had after printing a small one. It worked out in the end and I'll have this for years to come!
That is way cool!
Thanks! It was a lot of fun putting it together.
Awesome video! The pumpkin looks absolutely amazing with the light inside!
Thanks so much! 😊
Dude it came out awesome it looks great at night with the camping light.
I appreciate it!
Thats cool and the infill gives a in the clouds look with the light inside. That Sunlu does string, Ive given up trying to dial it out as its not blobby just angel hair, easy to remove lightly with a stainless scouring pad from the kitchen. (Oh, finally have Ender5+ running with BTT Minie3v3 TFT35, Shop fixed, took them 6 weeks!!!! Theres me thinking id gone nuts lol)
Epic looking 🤩🎃
Thank you! 🎃
Very impressive!!!!! This printer has the same build capacity as the Creality CR-10S5, but how does it compare in print quality??
Awesome video! Kind of reminds me of myself : print first - measure never 🙂
😅 It happens to all of us. "It won't matter much..." - Famous last words.
I had the same issue, the MOSFET was dead out of the box. I bought the same one you're using on Amazon.
It does the job!
Scale everything at the same time in the slicer
Typically, yes. This time, each piece would only fit on the bed individually and I kept tweaking my settings, so that didn't happen.
This printer has been sort of a nightmare for me and quite a few others on r/t500
Bed not heating (r17)
Bed bubbles like CRAZY
Bed bubbles may be the issue with first layer adhesion as well. For some reason the first layer or 2 always want to peel away from the rest of the print, especially on the edges.
The bed heating was definitely an issue! They acknowledged it and hopefully are providing replacement parts. I also just fixed a bunch of other parts including a broken extruder arm, burnt out/maybe melted fan, and a bad connection on the extruder motor. There has been a lot of maintenance on this machine so far.
Had this printer for roughly 2 weeks. It was...no bueno.
Details! What didn't you like about it?
FYI, they are offering build plate replacements for everyone who jas this issue. I just bought one. 😁
Can you supply a link to the mosfet just in case.
Here was the fix to their mosfet: Removing the "R17" resistor should fix the issue.
If you need it, something like this one should work: amzn.to/3MYbqm7
I’ll probably try a Tronxy PEI plate on mine. The cutouts for the bolts are a bit annoying though.
The bolts are really nice when you're aligning the bed.
Hi Kris, I have the same MOSFET problem....what have you fixed at the original MOSFET?? Best regards, Oli
It works....thanks!!!!😃
That was fast! Nice!
How would you rate the t500 print quality?
Overall I'm really happy with its consistency and quality. When you're printing with the 0.8mm nozzle though and trying to go at 200mm/s it can have some artifacts and stringing. I'm going to be backing off to 0.6mm and tuning that in. I think the results will be better. That just comes from personal experience with 0.8mm vs. 0.6mm.
Did you deleted my comment? Pretty sure i left you a comment here, something about a vecna clock lifesize ;)
But i did mention a third party that also offered prints, so sorry if that was the reason for the delete.
Anyone else have big problems with the x-axis shifting layers? There's a lot of it on reddit but on youtube everything seems fine. Mine is impossible to get a useful print from. $900 IN THE TRASHBIN. Support from the company is nonexistent.
Sorry to hear it! For me, it's about slowing down if it's shifting and, as a last resort, enable Z-hop.