5 features and 5 projects with the Atomstack A5 M50!
Vložit
- čas přidán 4. 06. 2024
- The Atomstack M50 adds some great useful features while improving on the 5.5 watt laser module technology. In this video I'll do my usual tech breakdown, talking about the technology of the laser and explaining some of the features that help differentiate it from intro models. I'll also work on some laser projects to give you ideas while testing everything from engraving to cutting performance. I'm excited to intro a cool geek project which can help for organizing electronics or anything small that you may want to organize.
The overall summary of the Atomstack M50 itself surprised me. Laser engravers usually have beginner models that don't feature endstops or an Estop, however I found those features to be beginner friendly. Every laser engraver should have those..they prolong the life of the device, make it easier to use, and safer. I show examples of how these work and give demos for those that may be looking to buy a laser engraver.
You can find more about atomstack here:
Atomstacklab- bit.ly/3kckgxS
here's a link to the laser itself:
A5 M50 Pro Laser Engraving- bit.ly/3LckfpA
Amazon affiliate link (helps the channel, and sometimes has better prices)
amzn.to/3F0HVuO
Laser Enclosures
Atomstack official: amzn.to/3vtTfN0
Comgrow (one in video...usually very reasonable) amzn.to/3MYPDsn
Boxes.py laser template makers:
festi.info/boxes.py/
Chapters:
00:00 Intro
2:08 Feature 1 - The Laser
4:35 Feature 2 - Endstops
6:18 Feature 3 - Emergency Stop
7:04 Feature 4 - Offline Engraving
9:10 Feature 5 - Extensability
10:29 Project 1 - Slate Cloaster
11:00 Project 2 - Leather Engraving
11:50 Project 3 - ID Badge
12:25 Project 4 - Cutting Board
13:20 Project 5 - Electronics Storage Box
16:15 - Final Thoughts - Věda a technologie
Thankyou so much for watching this video and the support! If there's anything I didn't cover please let me know!
Very informative and keep making！
Thankyou! Another video should be out soon, putting the finishing touches on the project :D
Thank you for the video. Would you recommend this machine to also cut thin veneers (thickness 0.5 / 0.6 mm)?
I’d probably recommend a 10watt like the xTool or the Wainlux Jl7 (that review is coming soon…I’m very impressed with it). After using 10 watts I realize that even if a 5.5watt can cut it, you can go SO much faster with a 10watt, and many are coming out for not a ton more than the 5.5s. I’d also recommend an air assist if you’re doing a lot of cutting…you’ll get cleaner faster and safer cuts.
For this machine engraving is great and cutting if you’re not doing it a ton is good, but nowadays the 10watt os where it’s at.
@@geektoolkit Thank you so much🙏🏻🙏🏻🙏🏻👌
just bought this laser, 1 st time owning one. got a steep learning curve. looking in to doing slate coasters but not sure of best settings ,
Congrats!!! Are you on Facebook? If so I’d join “den of lasers”. They have great tutorials. Also I’m working on some but backlogged on stuff due to a move but it’ll be coming soon!
@@geektoolkit will have a look yeah isn’t everyone on Facebook 😂
Very informative video thankyou. I realise from what you've mentioned here that it doesn't need to be continually plugged in to a computer, but can you tell me if this laser is compatible with lightburn. Thankyou.
yes! Absolutely compatable with lightburn! You can use it directly to control it, or you can use lightburn to make Gcode and then put that on an SD card and this will work with that.
@@geektoolkit that's great, thankyou so much. I have been looking at this laser as a second laser but was struggling to get an answer to my question. So again thankyou, very much appreciated 👍
@@gameonuk9169 Glad to help! Yeah the info is a bit sparse out there which is why I decided to do a series on them. I have 2 more I'm working on finishing up reviews for an dthen back to other fun content
@@geektoolkit awesome I'll look out for those. Thanks again. 👍
Thank you for your excellent video. Recently I have got a ATOMSTACK A10 PRO (my first laser engraver). I am very confused, and scared to use it. I would really appreciate if you could please make few video tutorials for the beginner. Thank you again.
Will do! That’s next on my list!
@@geektoolkit Many thanks 🙏🙏