Congratulations for you. Thanks a lot for your dedication. I thank your dedication time about slingshot class. Sorrry my English is not good. But I'm learning too. God bless you. A big hug.
Been making my own bandset fore a while now. I almost came to the same way of attaching the poach to the bands, but I dont use that notch. And of course, now I have to try that one. Thanks fore the advice. 👍
So it wasn't really clear to me which side the pouch went on. So the "rough" part is between your fingers? And the smooth side of the pouch is for the ammo? Thx!
How would the trifold work on your smallest bands? I've done it on one set already but was wondering if I can kink it easier with its narrow width. Mighty little bands btw👌
Right here. simple-shot.com/diy/3q40004x/diy-bandset-tying-kit?ref=simpleshot They do tend to sell out fast, so sign up for the alert if it's sold out. We'll let you know when they are back!
I tried this knot on my rounded rubbers but altough the knot seemed to be strong, it untied when shooting. I'll give it a few more attempts. Thanks for the vid
If it untied, there are two possible reasons: 1. Perhaps it just wasn't tightened down enough. 2. (More likely) there was a missing twist. It was probably a clove hitch instead of a constrictor knot (there's just one small but critical difference). Good for you for giving it a few more tries! Learning is part of the fun!
@@SuperAdvid That's great that you solved it. It can feel a bit wrong to tighten down as much as needed, but you do need to torque down on it pretty tight! :)
Hi Nathan, It's Bob Bussiere again, I have a very good question for you. I make my own slingshot bands, when I attach the pouch to the band I fold the latex, But I noticed that the bands I received with my hammer XT are rolled when they are attached to the pouch. My question is this, how do you roll the bands and then tie them to the pouch?
Great question! You can get the latex in the hole and then stretch it to get the 2 folds creating the 3 layers on the tag end. Then just tie it as you normally would.
The white string is simple cotton twine found at any supermarket, dollar store, or hobby shop. The crystal string is amazing...if used correctly. Check out this video at the 2:07 mark : czcams.com/video/Hgk2ZEvezXg/video.html
@@simpleshot yeah I used it and had to wrap it and then tie a square knot I just wasn't able to do a constrictor knot with it but yeah I did find it to be good thank you
“There’s no wrong way to tie it as long as you tie it correctly”
Sage advice.
Correctly is as long as it holds, right? 🤣
Congratulations for you.
Thanks a lot for your dedication.
I thank your dedication time about slingshot class.
Sorrry my English is not good.
But I'm learning too.
God bless you.
A big hug.
Thanks, that helps clear up some questions about banding. Nice vid.
Sofar your the only one i found that gave the detail information i needed...❤ it
Happy to hear that!
Very well done. A straight forward how to. Thanks.
clear, simple and easy. thanks!
Thanks! Glad you liked it!
Is fishing road good for tying the pouch to the bands ?
Do you still sell the Tying Jig?
Thanks good solid advice
Amazing videos, very helpful.
Glad to hear that!
Been making my own bandset fore a while now. I almost came to the same way of attaching the poach to the bands, but I dont use that notch. And of course, now I have to try that one. Thanks fore the advice. 👍
Hello! Think about do a video on how to tie dankung tubes to pouch, I' ve had some problema with it!
Pls give the exact measurements of the band thx I’ll wait
Good vídeo!!! Very important!!! Divulgando sempre!!! Like com CERTEZA!!!👍👍👍👏👏👏🎣🎣🇧🇷
Excellent
Hi, i'm planning on doing my first slingshot and i would like to ask you if i can use a ball bladder to make the bands?
Thanks for the great videos :D
It is likely butyl rubber and not very good for slingshot bands. Try exercise bands instead- like Theraband or Fitness bands
SimpleShot Shooting Sports Ok, thank you very much for the reply :D
So it wasn't really clear to me which side the pouch went on. So the "rough" part is between your fingers? And the smooth side of the pouch is for the ammo? Thx!
You can use it whichever way you like the feel best. It really does not matter. Try one each way.
How would the trifold work on your smallest bands? I've done it on one set already but was wondering if I can kink it easier with its narrow width. Mighty little bands btw👌
It is much more difficult with the narrow bands but the same exact concept.
@@simpleshot مرحبا اذا اردت ان اشتري هذا الشريط المطاط كيف
Is the "Crystal String" that Simpleshot sells tied with the "Constrictor Knot" also?
Crystal string is super simple, just wrap at the tie in point several times while maintaining tension and then finish with a square knot. Easy peasy!
Wonderful idea! Where can I get the tie jig? how much it costs?
Right here. simple-shot.com/diy/3q40004x/diy-bandset-tying-kit?ref=simpleshot
They do tend to sell out fast, so sign up for the alert if it's sold out. We'll let you know when they are back!
I tried this knot on my rounded rubbers but altough the knot seemed to be strong, it untied when shooting. I'll give it a few more attempts. Thanks for the vid
If it untied, there are two possible reasons:
1. Perhaps it just wasn't tightened down enough.
2. (More likely) there was a missing twist. It was probably a clove hitch instead of a constrictor knot (there's just one small but critical difference).
Good for you for giving it a few more tries! Learning is part of the fun!
@@simpleshot It was the first case. It holded tightly until expanding the rubber therefore I should have tighten it more before doing the knot.
@@SuperAdvid That's great that you solved it.
It can feel a bit wrong to tighten down as much as needed, but you do need to torque down on it pretty tight! :)
@@SuperAdvid We do now offer some new materials for tying. Our Crystal string makes tying a lot easier! simple-shot.com/new-products/crystal-string/
Hi Nathan,
It's Bob Bussiere again, I have a very good question for you.
I make my own slingshot bands, when I attach the pouch to the band I fold the latex,
But I noticed that the bands I received with my hammer XT are rolled when they are attached to the pouch. My question is this, how do you roll the bands and then tie them to the pouch?
Great question! You can get the latex in the hole and then stretch it to get the 2 folds creating the 3 layers on the tag end. Then just tie it as you normally would.
@@simpleshot thank you for the info!
Would you make a video of how to do it?
I think a lot of people would like to do it.
Why not use latex band to tie instead of string? New to all this stuff.
Latex will also work great. String is just easy to keep around and organized.
Since these are tapered bands, Does the wider end or the narrower end go through the pouch?
Nice
Where is the illustration
Tell me string name
This is just a cotton string. Band Tying Tape/Amberbelt is the best option for most shooters these days.
Why don't you sell that white string for tying pouches. I only saw and bought the crystal string and it's horrible.
The white string is simple cotton twine found at any supermarket, dollar store, or hobby shop. The crystal string is amazing...if used correctly. Check out this video at the 2:07 mark : czcams.com/video/Hgk2ZEvezXg/video.html
@@simpleshot yeah I used it and had to wrap it and then tie a square knot I just wasn't able to do a constrictor knot with it but yeah I did find it to be good thank you
there's no wrong way to tie it as long as you tie it correctly
Val Kilmers cuz fixin stuff. 😅
🤣🤣🤣