Video není dostupné.
Omlouváme se.
Installing Brother Toners
Vložit
- čas přidán 8. 07. 2015
- NOTE: Not all toners for Brother laser jet printers will follow the same installation instructions as shown in the video, however these steps fit the majority of models.
Replacing Brother toners can sometimes cause confusion as usually in order to replace the toner you must also remove the drum cartridge from the printer first, then release the toner from the drum. A lot of people are unaware that the toner and drum are separate units and will inadvertently dispose of the drum as well when they only need to replace the toner cartridge (on average a drum cartridge has a lifespan 10 times longer than that of a toner cartridge).
Although of varying shapes and sizes, the majority of Brother follow the same steps, although the locking mechanism for the drum varies between the different printers, some simply slot into place and don't need to be clipped in.
The model used in this demonstration is a Brother TN1070 toner cartridge for the HL-1110 mono laser printer.
For all you ink & toner needs, please head to our website www.inkspot.net.au. Inkspot, the home of ink & toner.
So much clearer than the illustrations on the official Brother site - thank you.
The printer was a bit complicated to hook up czcams.com/users/postUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 but it does the job very efficiently. I like the ink wells versus the ink cartages that cost an arm and a leg. It prints quickly and the quality is excellent. It shuts off when not in use, so you have to remember to turn it on. Overall, it exceeds my expectations. I'll update my review in a couple of months.
Thank you, this was easier to understand than the quick start guide's instructions.
What about showing how you actually take it out?
Thank you it is a simple process but very frustrating if you don't know for the first time....
Thank you! i recently brought a couple of toner replacements for my brother HL-11 series but i was scratching my head on what to do as i hadn't changed the toner in so long i just couldn't remember what to do. I've done it now, so thank you for uploading this video its helped a lot.
Thank you this is clear and easy to follow. Nice one! XM
You're a life saver thank you.
Thanks for this video. Far more helpful.
Very good shown.
Thank you!
I like this printer. Does the paper tray close while the paper is still in or do you first have to remove the paper in order to close it?
I have a brother DCP-J140W. I would like to know how the ink cartridges are put back in, because lt won't lock in place plz.
Wow. Everything is more clear now than the trash instructions I got with my printer from Sam’s Club
Are there any retaining clips on the lid
toner baru siap pakai atau belum bertmasuk isi sebuk?
thank you so much !!!!
Thanks really helpful and quick!
But what about that little white cap at the end that needs to come off? I dont know how to get it off?
After replacing the toner cartridge how to reset low toner error on software???
Thank you. Very helpful!
Thanks
I don't care how she took it out, I can figure that out myself. I just needed to how she got it in. I sent back two replacements from Amazon thinking the cartridges were too small...Duh.
Thanks for the tutorial.
Kathryn, how would u know, if it's guy or a girl hmmm?🙄🤭
Tysm sir your video is very helpful for me
Thanks you - from Perú
รบกวนถามผู้รู้หน่อยค่ะ พอดีพึ่งเคยเปลี่ยนครั้งแรก เราต้องกดปลดล็อคปุ่มไหนก่อนรึป่าว แล้วจึงดึถาดดรัมออก
Thank you
Very useful, thanks!
hi, may i know is this printer has color ink ?
sorry for my bad english
Hi Amirah, no this is a black and white printer. However Brother has many colour laserjets that would follow a similar procedure to replace their toners.
Last week a bought a brand new printer (same model) its always jam my paper, I used 85gsm paper but not solve the problem, I lost my receipt so I can't return it, could you please help me... Thanks
Probably because u haven't cleared out the paper, that was in it, im only guessing, im not a techo though.
Bro how much cost of the toner
I think its like 45 dollar for 1200 prints (TN-730) or 90 dollar for 3000 prints (TN-60). I think it comes with 700 base
@@rlcsd.1732 india cost bro
@@hennashorts9798 Which currency is that lol
so daft- doesn't start with taking it out!
Agree, why show the process with the job half done?
how do i print from computer
Thank you so much!
thank you so much
Amazing
thank you
mais comment vous faites sortir le toner???
Do i need to do this everytime the toner or ink goes out? Its kind of expensive...
Unfortunately yes it does. The toner is what actually makes the imprint on the paper, so when it runs on the cartridge needs to be replaced or you can't print. There are some tricks to try and prolong your toner cartridge though, the most common being to give the cartridge a GENTLE side to side shake when it is running low. This redistributes the toner powder inside and can squeeze a few more prints out. As for the cost of a new toner, I would recommend trying compatible cartridges a go. The high quality compatible/aftermarket cartridges do the exact same job and save you a heap of money at the same time.
@@inkspot7016 there are several videos on resetting the "toner low" message that yields more pages from the same cartridge and althought I haven't tried it, but I plan to becuase I did it with my old printer, some of the same videos that show you how to reset this function, will also show you how to refill the same cartridge with toner you buy on ebay, or maybe even amazon. Check it out, it really saves a heck-ova-lot of money. Better your buck in your back pocket!
(0:40) - *_"separating"_*
>
How often should I change my drum? I usually change my toners once per month.
Hi there, it depends on your printer model. For example the printer used in this video is the Brother HL-1110, a toner for this printer has a yield of 1000 pages and the drum has a yield of 10,000 pages. So the drum would usually need to be changed after about 9-10 toners. Drums tend to have a much longer life span than the toners, but your printer should give you a warning when it is starting to reach it's end of life and needs to be replaced.
Really aprreciate your answer. I do have a Brother HL1212W, which is quite similar to the video's model, I suppose. Thanks!
How do you know if the ink cartridge is stable?? Please reply ASAP
I'm not quite sure what you mean by stable? If you are asking if it works well, well I'm happy to say yes, it definitely does. Hope this answers your query.
amazing! thank you sir
toner need
Thank You!
WHAT DID HE DO IN THE END SLIDING THAT SMALL KNOB?
The sliding part you are talking about is used to clean the corona wire on the drum. It normally sits to the left side of the drum unit and isn't touched during the process of changing your toner, but was accidentally moved filming this video so was pushed back at the end. You shouldn't have to worry about this when changing your toner cartridge over though.
Inkspot Franchising lots of thanx for this comprehensive clarification
@@mrhuman4570 Please tell me why that little green alien on my brand new machine has a direction lable that seems to tell the user to slide it to the right and make a U-turn with it. Did I miss something in my intial set-up that I am now finding since I am changing the toner cartridge for the first time? If not now, when would I apply the little directions that are on the lable just to the back of it and still on top of the cartridge holder or drum... whatever thingy
Thank u
Thank
Very helpful, thanks 👍
Gracias!!!!
uhh how do you remove the drum?
It can be different depending on your printer model, but with most of the Brother mono printers, like the one used in the video, the drum will simply pull out. They usually have a handle part (the one in the video has a handle on the green plastic part) which you use to pull it out and slot it back in.
Merci
Shows red light
Plz reply me
What'asap 9149515343 ok
Not a helpful video, as it starts with the drum already removed. I need to see how to remove the drum before inserting the new toner cartridge. Grrr!
Learn to spell!!!!! Its SEPARATING...NOT seperating.....where did you learn English..???