brother HL 1110 laser printer drum cleaning - printer troubleshooting and maintenance schedule
Vložit
- čas přidán 28. 06. 2017
- brother MF 1110 laser printer drum cleaning
printer troubleshooting and maintenance schedule
brother MF 1110 laser printer drum cleaning
printer troubleshooting and maintenance schedule
brother MF 1110 laser printer drum cleaning
printer troubleshooting and maintenance schedule
~-~~-~~~-~~-~
Please watch: "Introduction of Instrument Transformers | Instrument Transformers"
• Video
~-~~-~~~-~~-~ - Věda a technologie
Brilliant! No chitchat, straight to the point and comprehensive. Saved me from buying and new printer. Thank you.
Ok. I thought this was a bit crazy so I decided to do it with an old Drum. I used a lens polish for cleaning scratches out of headlights. I put lots of the abrasive on and polished until all the scratches were gone. I then cleaned it with alcohol 70% and KleenX. The results were better than I thought. While I do see a much lighter print now, the printing is more uniform and clean. Probably won't work a second time. But I have ordered a new Drum as a replacement if a second cleaning damages the Drum. So far, this actually work. I have an MFC 2700DW.
Thanks for this video. I had a smudge on the drum and just used spray cleaner from the kitchen. It's all good. The disassembly instructions are great. Thanks.
yeah. dont forget also to floss your toner after
Hello Electrical Machine Engineering, U saved the day. I was about to go out to buy another laser printer as I tried cleaning the drum using only Iso-propyle alcohol. Your method of using a mild abrasive tooth-paste did the job. I had to clean the the drum using the tooth paste twice. ...Ean Aw ( NZ)13/10/21
Thanks for the info and comments here. I used industrial alcohol (ethyl alcohol) dabbled on a small piece of cotton to wipe clean the entire drum, rotating it by turning the gear at the end of the drum and my printer is back to normal.
that little jump cut where you change the paper xD @6:38
Thanks, the video helped me in learning the way how to open the drum. Thought I did not use Toothpaste as I was not sure, replaced it with the alcohol to clean the drum.
The way to dismantle was easy following this video. I tried with toothpaste it was worse, then tried with just alcohol swabs which seemed even worse. Panicked but I realised that you just have to print a few more times until it's ok. Now the print is clean, thank you.
WARNING! this doesn't work. toothpaste will destroy your printer drum.
It's already destroyed, so nothing to lose after all. Cheers.
i agree after proceeding according to instruction printings were total mess, my printer landed inside of rubbish bin
Muy bueno, tengo la misma impresora y no sabia como limpiar ese rodillo, gracias!
Thanks for the tuto. It worked! didn't use toothpaste though but something fot cleaning screens.
Nice tutorial. Terimakasih 👍👍
Gotta love the way you keep showing us the circlip ... see ... here it is!
Buenisimo, me ahorre unos$$$, en serv tecnico. Felicitaciones
terima kasih tutorialnya, sangat bermanfaat
you don't use anything abrasive like toothpaste you use rubbing alcohol and also never touch the drum. The oil on your finders will get all over it and cause more problems. I am a electronic technician.
Would a lens cleaner used to polish plastic be useful?
Thanks to your comment (and a bit of 75% alcohol) i cleaned my printer's drum without any problem!
I wish I had read the comments and found yours before I followed this horrible example video. I found a few specks of crap stuck to the drum and cleaned it off then polished with toothpaste and some tissue paper afterwards, following the video… Then I put it all back together and did a test print out… And it’s absolutely horrible! Far worse than how it was before which just had a few specks on the page… I’ll have to try again with rubbing alcohol to see if that works…
This is what I just read from the Brother online manual so I agree that this video's methods seem detrimental to the toner cartridge
first print after this = total mess, after about 10 prints it has recovered to 95% cleanliness, hope it will get better each time until perfection
Toothpaste is abrasive and will damage the drum. Use de-ionized water and a lint free cloth to clean everything. Also, use gloves. :D
But it also actually works as a Polish, to remove some of the light surfwce wear on the drum. Brass Polish/ cleaner works far better than toothpaste!
My OPC drum is green and this one is black, so I painted my drum in black car paint. Now it works perfectly. There's another solution. Just leave the drum out of printer and you will never experience faded image, stains or smeared toner...no image at all. Result is the same.
What, seriously? it that was the solution then everyone would be painting their drums and saving a lot of money! 🤣🤣
I, after cleaning this drum (that part from glass) still have some "spiders" on the printed paper, i dont know how people clean it, but there is allways some dust grain or any small object sitting on the drum when i put it back into the printer, is there any solution on that? All those tiny bits of dust are visible on the print.
i found a scratch on that black thing. hoping it still work
everything went well according to your instructions, instead of colgate i used normal kitchen cleaner, except the last part of getting that tiny blocker into the rod! Damn thing won't go back in!
Shaik Azrin Daud i used pliers
The moment i saw this guy’s BARE hands....no gloves used, that was it for me.
After toothpaste cleaning, you will get lighter printings, then rub your nose on the drum making it oily and clean it out. it does perfectly work.
GRACIAS !!!
sangat berguna toturial nya terimakasih (y)
mama mu pasti bangga
Thank you bro 👍🏻
Thank you 💕
I will try this bkz when i use the printer, there are smudges and spots on the paper. Hope it works for me!
DR 2255 print out fully black after clean blade and drum how to solve this problem.
Hola, sabes q haciendo eso se me cortó un alambre muy delgado, parece un cabello, para que sirve ese alambre??
Thanks!!
i use glass cleaner to clean and the print result abit lighter, but in 24hours it became abit darker but not as dark as before cleaning. hope in few days it will be normal
What the frequency of maintance
Using the toothpaste the way it is shown destroys the drum.
I had to go for a new drum.
Doesn't work the way it is shown.
Fantastic
To be honest the instructions were so good
But toothpaste? I don't know
I used Alcoholic substance to clean that
But something else appeared
Is there any other substance that i can use rather than Alcohol??
Guys, this must be an April's fools joke right? The video is cut just before turning over the paper haha. I loved one guy's comment who said to rub your nose agains it to make it oily - I imagine I would get a black nose haha. This video is yseful to learn how to dismantle it though, so thanks to the autor for that. Brother has instructions on how to clean the drum. Just search for 'brother printer smudge'.
Hello everybody ,
I have a 'Brother MFC 8460N' but its interface is in spanish and i'm lost ..my question is what is ' MP', ' MP>T1' , ' T1 >MP '
Please how to select and change bacs (superior, middle and at bottom ) and sizes of paper for scaning and for copying ?
Good vdo
Tanya sikit. Bila kita print, keluar tompokan hitam di kertas. Itu tanda kena servis atau kena tukar drum? Mohon pencerahan. Tk.
Ikut video ni, suggest clean drum cukup
not sure use toothpaste but i need more stronger cleaner than isoprofil alcohol.
Sir meri drum unit me Green Button ki wire toot gyi abb kaise thik ho sakta hai..??
Tried it and it completly f***k up the printer
If you have doubts that this is NOT GOOD FOR YOUR PRINTER, check minute 6'39''. you will see a brake in the video.. this is when he changes tha paper, because he RUINED the Drum
shabash
Very crude way of handling delicate things like OPC drum & toothpaste to clean the drum !!!!!! Great Great!!!! Are you really equipped with technical knowledge?
Chandrakant Kane it works. So great video
Use I.P.A. solution for cleaning drum.
iso prophyl alcohol ?
It works, thanks.
My hl2130 drum got damaged after Cleaning with toothpaste
Informative, but do you think you could find some more annoying music?
Que ganas de generar contenido basura
is that using toothpaste?
Yes,That's Toothpaste.
not working :@
Thanks for tri it. please do it properly and also reset your printer
Electrical Machine Engineering it was worse
This will destroy your drum. Please do NOT follow the video.
It's can't be work
Can I use white Jocky underwear to clean the drum? ...or will only the dark Fruit-of-the-Loom you use work..?
LOL FAKE !!! :D, if you want destroy your drum ^^
OH God that music... WTF!👎
Great video
It works 🖤🖤👍
This method ABSOLUTELY FUCKED my printer. Thanks mate...... not
Mine too
This is the most stupid thing I've ever seen. Don't try this at home.
😂😂😂
Shit..remove the song
sorry but had to give a thumbs down after reading all the comments re dont use tooth paste on the drum
pleaseeeeeeeeeeeee dont try this tipss.....my drum is lost......so please dont try this...this is fake video..
ACHTUNG!!!! Es funktioniert nicht!!!!!
cheating video, after do that, it will ruin your drum, be cafeful, don,t believe this and dont do this if your just have few dots.
I'm sensing anti-Semitism vibes coming off this. Like you'd have to be a Jew to try to fix your cartridge instead of buying a new one.