Nissan's fuel pump replacement
Vložit
- čas přidán 22. 08. 2018
- Thanks you for watching please like comments and subscribe and share the love
help me help you support my channel
via
PayPal - www.paypal.me/Momoboss5
cash app- cash.app/$dullahgosohard
thank you for your love and support
here is where you can get the parts amzn.to/2V8rMig - Auta a dopravní prostředky
here is where you can get the parts amzn.to/2V8rMig
How much did u pay for that pump..? And was it genuine or non genuine?
It was an aftermarket pump i got the work just as good with no trouble clicking the link and put in your car info and search and you will find them with the price
Link not working
Click the link then search for your car year make and model and trim
This was a great tutorial. Exactly what I needed. I went ahead and reattached the fuse box after purging the fuel line, then unplugged the battery. Then I took out the old pump and installed the new. The metal seal was a pain to put back on. But when it was done, there was no check engine light! Thanks so much!
great demonstration. i had a difficult time removing the rear seat bottom cushion. probably because i am 64 years old and not as strong as you. on another video the mechanic put a pan under the fuel pump when he pulled it out of the fuel tank to catch any gasoline drips. i recommend brushing off the top of the fuel pump before removing it from the tank. i would also recommend placing rags around the pump hole and on top of the seat bottom to catch any fuel spill. the gasoline fumes will stink for awhile. as an airplane mechanic i would put a baggie with an absorbent rag in it on the fuel hose to catch any drips. great job. thanks
You’re the first one to say in your video to open the tank lid to release any pressure thanks for the information
you can also remove the fuel pump relay & crank it over a couple times to relieve the pressure.
Great job!! Thank you for sharing this information with us! Greetings from Texas!
Thank You! This explained it all. Followed the steps and was done quicker than expected.
Just wanted to let you know that I’ve only ever changed a headlight in my car. I knew the issue was the fuel pump from sending videos to people of the issue. I watched this tutorial, followed your instructions, and you seriously saved me like $400. Car is running great!
Rachael, what was your initial problem? Were you losing acceleration?
Ruly it’s been a while, but from what I remember my car would turn over but wouldn’t start
Rachael, thank you so much! Helps my research.
When working to get out the pump metal ring thing (8:58), have your friend or sibling do the hammering on the opposite way. The metal thing we are supposed to rotate is mostly crooked so this will save tons of time.
This is really the perfect and only video you need to place the fuel pump.
Yes lets create sparks by clanking on the metal right above the fuel tank
Thank you for the step by step tutorial on replacing fuel pump. I felt like vacuum cleaning the debris before removing the pump in case dirty fall in the open tank. Once again thank you so much.
Awesome video man. Helped a lot! Keep makin em
Subbed. Very good tutorial. Very well explained and good job with the camera angles. I look forward to watching more of your vids. Keep up the good work! Many thanks from NYC.
Good looking out on this video. It worked on my 2011 Nissan Pathfinder. I just had to cut out a square on the metal panel with electric blade saw. Eazy and simple. No experience needed. Access is behind the driver seat. Back left passenger seat. Lift seat up.Time it took was 25 min. Thanks again for this video.
Is this the same for a 2009 pathfinder? How did you know where to cut metal panel at to line up with fuel pump?
Getting ready to do 2005 pathfinder. How do you know how deep to cut and where the location of the pump is?
Excellent video ---Straight to the point . Thank you
Heaven sent video. Awesome. Thank you!!
Thanks for the info, you are super!
Thanks. Waited for a long time to see this.
Thanks brosky my car back to the road again
Headed now to fix my 2012 Sentra. Don't know the results yet, but your video gives me hope.
Still trying???😅
Great job, looks like a 10 th grader could exchange the pump. Either oem or aftermarket... great job
I liked the video it was straight to the point not like a lot of others, now some would say to disconnect ur battery before connecting the pump but that was a great video brother
Good job showing us how take a fuel pump stop by step
Thank you for this video , it's really helpful for me
That was the best tutorial ever on youtube.
Man thank you for explaining this straight to the point. You the best I will follow now for help. Most people talk for 30 min about they hair instead of the car much respect
Thank you very well explained
Thanx for showing how two take the steps in disconnecting fuel line and plug looked at alot of videos you my man the only one that took the time two show important disconnecting the fuel line and plug
Facts
Thanks a lot mate it was really help
VIDEO WENT HARD AF THANK U BRO
thank you sooo much for the Effort
thanx for the illustration, it really helped me, much appreciated
Thanks for sharing, been running my 2018 Nissan Rogue with the CEL on for months now because of bad fuel temp sensor which is part of the fuel pump. Car has 161K miles and although the fuel pump still works, I think its time to get it replaced before it fails catastrophically. Your vides gives me everything I need to know to get the job done myself instead of having my shop do it. I will be buying the OEM fuel pump which will hopefully last as long as the one I am replacing.
Get delfi from Rock Auto also buy the opening tool don't use metal on metal is very dangerous any spark....also put fire extinguisher handy in case of fire good luck
The tool for Murano lock ring is $400 US.
Very helpful video. Thank you so much.
Dulla !!! Just saw your video this morning. Replaced the fuelpump (2012 Altima 2.5s) took me more time to go to the store and get the pump than it did to put it on. THANK YOU, THANK YOU, THANK YOU!!!!
Thank you
You help me allot
A perfect video, thanks so much!
very good and informative video. step by step instructions. awesome bud.!!
life is really not complicated.Good Job.
much respect from motherland.... South Africa
Thanks a ton!
Good job, bro. Thanks ❤❤❤
Thank you for this video. Doing it now, hope it helps. Fingers crossed. You def got a thumbs up from me.
Respect mi G, subscribed !
Great tutorial!....and nice hammer 🤣
The hardest part is putting the seat belts through the hole.. hehe. Great video!
Good tutorial mr....nice
Great job nakama friend Shalum!
Awesome, thanks. I thought I was going to have to drop the tank.
Subbed. Thank you .
Good work
Great video brotha
I love this works ❤
To remove the 1st metal plate, some plastic oval (screws) are under a metal bracket. I used an open end 10mm box wrench to turn them. Way easier.
Been trying that shit for 2 hrs useless I'm going crow bar
Thanks so that's a great video
Thank you. Rogue is running again!
Thank you👍👍
Thanks man
Great job
Great video. Very helpful. If yo spray the ring with a little WD40 before tapping on it it will come off alot easyer.
Your killing me trying to take of the retaining ring 😂
Good job yardy
Thanks for the video...for all those ding this...may not want to use a metal bar to loosen it. Spark + gas are no bueno...
Great video and explanation. Does it works with a Nissan Qashqai J10 Diesel? I've been told that my car model has no access to the fuel pump from the back seat, and I should remove the tank growing up the car. They were not sure, I'd like to avoid to dismount the back seat :) as a side note, my car is working, but the sensor for the diesel level is not working.
great video!
THANK YOU VERY MUCH
Respect!
Thank you Dullah...do we need to remove any screws/bolts before taking off the back seat? Seems very difficult to take it off the way you demonstrated. I have the exact 2009 Nissan Cube
For that car yes
Thanks dude
Very good video
AWESOME VIDEO
It's good job
Thanks
Support channel..good job
Thank you very much ❤❤😊
Thanks my brother
Serias tan amable de decirme cual es la corriente de los cables y la tierra del conector ?
hi,is it the same for nissan terrano 3.0l 2004?in iceland they charge me around 2300 euros for the fuel pump and labour,is crazy really
Hi I followed the instructions as you said, but when I removed the fuel line it started spraying everywhere. Please assist.
Unplug the fuel pump then crank the car when it shut off open the gas tank and then turn the key off the car make sure no lights on on the dash they remove the fuel line from the pump it will spray alittle but it will stop
ALRIGHT 👍🏽 👌🏼
which year pathfinder is this? i have a 2011 is it the same location?
Do I need to disconnect the battery and or other components ( electrical or not ) before replacing pump ?
Would this be the same process for a 2016 Nissan NV 200 cargo van? My engine cranks but wont' start and it happened right after filled up my tank with gas. I had to get the vehicle towed home from the gas station.
God bless you my friend, hope you googled or found your answer someway.. my car's tank is filled also and I also had to get it towed back from my docs appt. Engine cranks but won't start.
Thank you for this video😍 your giving me hope!!!! I tried the amzon link, but it want work for me😦! not sure which fuel pump is for my 2014 Nissan Altima on amazon??? Called auto zone & there wanting $500.00😭! Any tips which fuel pump any help would be greatly appreciated! !!!!?
if they have for that year in stock it will let you know which is the right pump for your car i went looking for you but i didmt fin it on amazon try ebay.com and see if there is any luck there
Go to the junk yard they have them for 45 bux
Did you check rockauto?
So if you come across the problem with the fuel tank/pump metal locking ring not fitting flush or some metal slots are overlapping/misaligned then just use the original Green rubber O ring instead of the new one or get one similar in size to the OEM Green Rubber O ring. I came across the same problem with the new black Rubber O ring not fitting but used the original Green rubber O ring which is bigger than the new Black Rubber O ring in size and I was able to insert the metal locking ring back with no problems. (Took me 2 hours of struggling and finally comparing both Rubber O rings to release my mistake). -2010 Rogue SL AWD-
Some good points you show in this video, but no way would I'd use a steel crowbar and steel hammer to remove the lock ring. One spark and you, the car and the building are gone. ⚡💥🔥
Hello, what is the name of the iron like tool you used to open the lid of the fuel pump?
Good points. TU
Gd channel gd info new sub
What are some indicators that the fuel pump needs replacement? 2016 Nissan Altima
Bredda where did u buy the pump I have a 2015 sentra would it work with the same pump? Keep up the good work!
Click here for the pump amzn.to/35u6Vsh
@@DULLAHGOSOHARD thanks my G!
Thank You for this video. I purchased Nissan Rogue 2020 and engine lights on. (not even a year yet 4,000 miles) fuel pump repair it but when I start my car this week, gas leaking under and smelled gas, what could it be? Thank you appreciate. right now it is in dealer and waiting, no one call yet..
Could be a crack in the fuel line, fuel pump or fuel tank it self
@@DULLAHGOSOHARD Thank you so much. new sub here. I appreciate your reply. seems They dont care and no call yet from them. I buy toyota next time.
General quick question would this pump/filter combo work on a 2014 Nissan Sylphy?
Yes that's how it come
I think the lock ring would rotate back on easier if you put a thin film of it under the lock ring.
For a 2013 Nissan Rogue, would it be the same, or would the fuel tank have to be dropped?
I think it's under the back seat
Great job but I need the exact place to find the fuel filter on a 2010 Nissan versa please.
Very good job brosky!
amzn.to/2XBj35O
Great job, but you shouldn't change the direction of the tubing and wires.. Because the tube will kink and also the floater will not work properly
You can only put it in one way or else the tube wont fit right
Adana'dan selamlar bro. I mean hi
Perfect Step by Step to remove fuel pump assembly Thank you for your support
good day brother I bought a Nissan bluebird sylphy 2001 with qg18 engine. however when the car starts and a sudden rev is given the engine shuts off. What is your recommendation.
Try and look for vacuum leaks and try to adjust the distributor
On my rouge fuel gauge not reading do have change fuel pump or fuel sending unit
Is the gas placement the same for a 2013 nissan altima 3.5 sv?
Yes