How to Install Fuel Pump E8536M 2003 - 2007 Nissan Murano
Vložit
- čas přidán 24. 02. 2015
- Application:
E8536M
NISSAN Murano 03-07 3498 cc. (3.5L)-VQ35DE
NISSAN Murano 09-14 3498 cc. (3.5L)-(Left Side)
This video is about how to install an E8536M fuel pump in a 2003 - 2014 Nissan Murano. Airtex is committed to providing the most up-to-date, in-depth fuel pump replacement information that professional technicians need to diagnose, repair and install today's complex fuel delivery systems. Airtex is the only U.S. automotive aftermarket manufacturer that designs and builds electrical AND mechanical fuel delivery system components, including modular reservoir assemblies, electric fuel pumps, mechanical fuel pumps and in-tank sender and hanger assemblies, for a full range of car, truck, fleet and specialty vehicles. - Auta a dopravní prostředky
thank you for your time and info
I replaced the ring gasket at top of pump (was leaking) but unable to locK THE ring clamp under the 5 HOOKS, Gasket is in groove OK. Any tips please?
what is the part number for the NISSAN fuel pump retaining ring removal tool
please if you can put vedio how chanch full pump nissan sanny 2012-2013 thank you
my care dont star morning i need to try 3 times or 4 then stare.so battery good and everything good .do u thing i need to change fuel pumb .?
which should be the pressure of the pump in 2004 murano?
thanks
Hi, I have a Nissan Murano 2003 and need to replace the fuel filler neck, anyone have video or detailed explanation on how to do this?
Best regards
Atli Eythorsson
Keflavik
Iceland
my 2014 rogue after replaced fuel pump ，whole car is the gasoline smell ，it is normal ？ how to remove this flavor 。
I know this maybe a stupid question, is there a fuel filter in these cars? Specifically 2004?
What’s the tool for the ring removal tool
Thank you, this video was really helpful and we'll detailed. Now I have just one question. At the end when you regulated the Gass pressure with that funky looking gun. I just want to know what's it's called.
Ok thank you so much. Now, I installed the fuel pump to my nissan murano and once done I turned it on but there is a really hard shaking to the car. When i accelerate the shake is more. Could that be the cause of not releasing the pressure?
weird i forgot top do the presser thing and it works fine
so as it goes the pump is working but now i have multiple problems , ABS light and TCS light are on . my MPH gage isnt working my fuel gage isnt going past quarter tank and my MPG gage isnt working as well. i have an 06 altima SE-R . all i did was deaconect the negative terminal and the fuel pump and reconnect new one .
Alexander Castillo drive it so the computer catches up.
Hi, are there any differences in the place and direction of fuel pump, between left-hand drive murano and right-hand drive murano? thanks
thanks for replying. I'm in NZ, and I plan to buy a Airtex pump but I did not know if it fits a right hand drive murano.
Where can i get a Nissan Fuel Pump Retaining Ring Removal Tool? Or is there another way to get it off?
Amazon.
What size drive do you need for that tool? Thanks for the vid and tool!
1/2" drv.
i changed the fuel pump and the car started up and was working for a good 25 min , i got back out to turn it back on and now it qont start . what could it be ?
When you turn the key all the way without starting it do you hear a whirring sound ?
just bend the metal housing down with channel locks and use a hammer and large screw driver worked like a charm and saved 125.00 bucks on the stupid tool you will only use once ! LOL
I did it the same way on a BMW, yep!
Здрастуйте у меня Nissan murano 2.5 dci дизель какой подходит топлевный насос ?
Where can I buy this tool to removed the ring on the fuel pump?
Thanks
TheToysforboys , where ?
Freedomracing.com has the exact tool listed on their website for just under $127, but I'm sure they can be found elsewhere much cheaper
can you take the retaning ring off with a screwdriver and mallet,or where can the tool be bought ?
u can but putting in back on the same way is extremely difficult
@@jonathanw1711what’s the tool
Is the 2012 similar?
Is the fuel filter located inside the gas tank?
The job is similar. Your 2012 calls for more time in doing the job, other than that the process is pretty similar. Both modules do have a strainer contained within the housing.
how different is the fuel pump of a 2004 Nissan quest in relation to this video?
+Airtex Pumps , thank you for replying and for the help!
you don't have to drop the fuel tank on the Quest. take out the middle row seats and lift the carpet. floor access panel is behind the middle row seats towards middle.
this fuel pump can be a PITA if u dont have that tool to install that lock ring
Very true. Without the Nissan tool, or equivalent, removing the lock ring is next to impossible.
+airtex Pumps Which store can you rent the tool from?
+Airtex Pumps i was unable to source that style from Napa or Advanced. However our shop get along well with the local Nissan. But thanks for the educational video and thank you greatly for actually replying!
hola tengo un grandee problema con mi nissan murano 2006 yo quite la fuel pump y la instale de nuevo pero ahora el carro no arranga que pudo aver pasado y como lo arreglo alguien que me ayude por favor
ok thank you
Is the filter and the pump one and the same?
yes
Its not necessary to clean the fuel tank.
Do you have to put fuel back in the fuel pump ?
After install is complete, battery reconnected, function the ign. key 4-6 times, without starting, you should hear the pump responding each time. Then it should start.
Just bought this tool online for 126 bucks 47 extra for UPS next day air . That's a hell of a one off turn for that price !!!
It's obvious the manufacturer doesn't want a civi working on it and only wants the dealer to do it so they can charge you a arm and a leg . Pitiful !
I just replaced my pump in my 07 murano. I ended up buying a knockoff at autozone for 50 and made it work, though it was a royal PITA.
@@LacunaSerenity10 what is the tool you bought? Really in need of one because only 2 retailers sell it and they want $300 to $470 for it. Insane.
How much does it cost to get this done at your local Nissan dealer?
ALLDATA Flat Rate Labor time is 0.7 hours for a 2005 Nissan Murano. This does not include time to drain, clean and refill. You will need to check with your local facility to verify their labor rate per hour and their labor times for the associated tasks.
Ok thanks for replying
Where do I get the took to turn the lock ring
I would start by checking the local parts store. While this tool is unique to Nissan it won't hurt to start local. If it is not available locally to rent or borrow or purchase an internet search will show a number of suppliers. Make sure it is applicable to the Nissan you are working with.
Where is the fuel filter?
At the engine compt.
You completely gloss over where to connect for releasing line pressure ?
my car is lik that we need hop
Can u call me it
those fuel pumps are the absolute worst airtex
Are they?