I think these are by far the best mirrors because they are running light white which is so pretty, and then it turns Amber to let people know you're turning you know I just like these better than the others that are straight Amber or off color.
Heads up for anyone with a work truck silverado 2013. The Tubular handles that stem from the top of the window down to where you open the door have bolts behind the plating as well as the ones displayed in this video.
Mirrors are very nice just received them today the only downfall is for the price they should come with the power folding option just like my buddies who just got his last week for a 2014 that come with the power folding option for about the same price
I didn’t either (just installed them today) but I was able to poke a hole and run it through the boot with the hood release cable. On my 2013 LTZ it was right above the main wiring boot.
We do not currently offer power fold for 2007-2014 trucks, however it is in development (no firm ETA at this time). All of our mirrors DO come with the power adjust for the glass.
I have a 2011 Silverado 1500 LTZ, and really need the Power Fold feature for parking in addition to power extend but I have the smaller power mirrors now with turn signal and dim feature. I just need to know if these are available for a 1500. Thanks.
Sounds like you might need our dual function harness. Shoot our team an email to sales@boostautoparts.com and they can get you setup with exactly what you need.
Those would be the switchback option. You can check them out here: boostautoparts.com/products/2007-5-2013-gm-tow-mirrors?+Mirror+Install&Comment&CZcams
Turn signal should be plug and play - please email a video and your VIN to support@boostautoparts.com and our tech support team will get this resolved ASAP.
Will this work for non power windows and locks? Just curious how that would go about? Where would u hook up wire to? Or do I have to use non powered side view mirrors.
These are NOT designed for vehicles that originally had manual adjust mirrors. Please contact our team at sales@boostautoparts.com so they can guide you on how to get them installed.
I have a 2011 Silverado 1500 LTZ with the power fold on the stock mirrors. I have a set of the 2015 style tow mirrors i want to take off my old truck and put on the LTZ. How would that work with the power fold stock mirrors and non power fold tow mirrors? I assume the wires on my tow mirrors will plug in like they did for power adjust and blinkers, but will i just not have a plug for the power fold option?
Does the orange wire need to be tied to the parking lights fuse? I would like my switchbacks to be a true DRL. As it is now, they only come on when my headlights come on.
Instead of running the white wire to the fuse for the reverse lights, could I run it to the fuse for the cargo lamps and have it turn on and off with the switch manually?
I have the same exact wiring and harness as shown in the video and have everything wired the exact same and my running lights won’t work and can’t figure out why but blinkers work and the reverse lights work most of the time
Contact our support team at 765-831-2830 and they will assist in getting this resolved in no time! They know these trucks, because the own these trucks.
@@boostautoparts my running lights aren’t working but everything else is. I was thinking it was the fuse. I put the same size in that I took out the fuse box.
I have 2 black wires 2 white wires and 2 red wires plus the plugs on each mirror. where can I get a wiring diagram for the mirrors. way more wires than what you are showing.
The mirrors from us will have the same wiring as shown in the video. If they are from us and you have any questions send an email to support@boostautoparts.com or give our team a call at 765-831-2830 and our team can assist. If the mirrors are not from us unfortunately we cannot assist with identifying the wires.
It sounds like you didn't put the original fuse into the lower slot on the fuse tap. Reach out to our tech support team at support@boostautoparrts.com for assistance.
I just bought a 2008 regular cab/long bed Silverado work truck. It has manual everything. I have heard that even the WT models have the wiring for door controls. If this is so, I suppose I could get an inner door panel that has the controls from a junk yard. What is your opinion?
Would the white "running lights" on the mirrors work at night time when my actual headlights come on? Or will they only function on the running light circuit? I believe that running lights is a circuit that is not functioning when the light sensor says its night time.
I just ordered these for my 08 2500 duramax the mirrors now have turn signals and power adjustments is this gonna be a plug and play for the new ones? I ordered the same in the video
So do you leave both ground wires for each mirror inside for the in cab ground? Do you pull both sets of orange and white thru the dust boot or just one set? And is that ground spot the same on a 2011 2500HD LT Silverado?
Yes, both gray wires would be pulled through and into the cab to be grounded out. The ground location should be the same for a 2011 - but you can use any good metal ground in the cab (NOT in the door). You will need to bring the orange and white wires for each side into the truck, at which point you can splice the two sides together. Feel free to reach out to our support team at 765-831-2830 with further questions.
The wire colors may not be the same as our mirrors. On our mirrors, the wire colors are as follows: Orange = Running Light White = Reverse Light Black = Ground
Two Questions I have a 2011 Sierra Denali & from my understanding you cannot run LEDs for your turn signals without getting hyperflash for the 2007 - 2013 Body Styles unless you run resistors. Do these mirrors come with built in resistors or are they error free meaning no hyperflash. Also, is there an option to get these mirrors with Amber running lights instead of the bright white Leds?
These mirrors will not cause hyperflash, and do NOT need resistors installed to prevent it. We do offer the mirrors with an amber running light rather than a white running light. You would want to choose the Signal & Running Light 1.0 or 2.0 on our site.
Not currently for this application, but it is under development. You can email sales@boostautoparts.com to be added to a list to be notified when they become available.
If my truck does not currently have turn signals and running lights on the mirrors do I need to order something other then these mirrors or does the harness come with the mirrors themselves
I’m looking to get mirrors for my 2010 1500 LT Silverado. The only feature my mirrors have now is power adjust, I know for sure I don’t have rear defrost, and although the mirrors you offer have defrost it’s not something I’m too worried about. But will the turn signals work, if not what steps have to be taken to get them working? Thanks.
Switchback would be a white running light, amber turn signal. 1.0 is a dim amber running light, bright amber turn signal. 2.0 is a bright amber running light, bright amber turn signal. Reach out to our team at sales@boostautoparts.com or 765-831-2830 for any further questions!
Hi guys i have a 2010 1500 that im wanting a set of these with just turn signals. I currently dont have the turn signal feature on my mirror but i do have power mirrors and heated mirrors. Will these plug an play with my harness? Wanting to make sure before i spend 250 dollars and they wont plug into my harness. Also with signal only model where do i run my wire?
Yes these will work on your truck! Power, signal, and defrost would be plug and play. You would just need to wire in reverse and running light (if equipped) following this video.
It is the same tap for running light and reverse, but the power adjust and signal would not work. Please reach out to our team at sales@boostautoparts.com for further guidance.
does anyone know if these will work on a 2014 with manual everything? It's a work truck and i dont like the boring plain towing mirrors. I need some similar to these.
Signal & Running Light 1.0: The lights will flash as a turn signal. At night when the running lights are activated, the lights will operate at 50% intensity for running light, 100% intensity for turn signal. Signal & Running Light 2.0: The lights will flash as a turn signal. At night when the running lights are activated, the lights will operate at 100% intensity for running light, 100% intensity for turn signal.
@@tacos1308 You can use a simple butt connector, otherwise you could use a pair of our in-line splices. I'll link them below boostautoparts.com/products/add-a-fuse-tap?variant=13538365276215
@@tacos1308 More than likely you have an issue with your gray ground wire. Please send a video to our support team at support@boostautoparts.com and they will be able to assist.
The fuse is purposefully placed near the mirror behind the door panel so that issues can be isolated from side to side on shared wires like the orange running light
@@fernandotrejo1425 below is a link. Give our team a call at 765-831-2830 if you have questions or are looking for other small subcomponents. boostautoparts.com/products/2007-5-2013-gm-tow-mirrors?+Mirror+Install&Comment&CZcams
@Boost Auto Parts mine that I installed today are from scitoo. Everything is very similar but mine came with only two wires for the reverse lights. They're mounted on a 2007 Chevy Avalanche. I'm just trying to find a way to get the reverse lights to work. It's got a red and black wire so do I need to put the red wire only in the trailer slot in the fuse block and ground the black in the cab?
Hello, Unfortunately since the mirrors are not from us we are not sure which wire controls what features. Beyond the video, we would not be able to provide any further guidance.
All tow mirrors will have some shake, but our mirrors are known for our quality and have a minimal amount of shake. Feel free to check out all of the reviews for our products.
Hey Ry, Did you buy the mirrors from us? Boost mirrors use the wire colors in the video and we offer the fuse taps. It sounds like unfortunately the mirrors aren't from us.
The additional wiring is for the running light and reverse light features. We offer signal only mirrors that would be plug and play for power adjust, defrost and turn signal. Unfortunately since the running light and reverse features weren't offered in the older trucks there is some additional wiring required.
Link to product: boostautoparts.com/products/2007-5-2013-gm-tow-mirrors?Mirror%20Install&Comment&CZcams
Would installation be the same for a 2012 1500?
@@rjposton7027 Yes
Best mirrors on the market 🔥
Glad you made this video. Now I can fix what the previous owner did.
Happy to help!
Dead on accurate video. This made the process so much easier. Thanks!
Glad it helped!
I think these are by far the best mirrors because they are running light white which is so pretty, and then it turns Amber to let people know you're turning you know I just like these better than the others that are straight Amber or off color.
Thank you!
Pretty? Lol
Thanks for the video, quick and painless.
Looking forward to when you offer these mirrors in the power fold version. Thanks for sharing.
@@tylerjarman2275 anyone know why?
Probably the fold motor to big idk. I’m definitely gonna miss that feature
They have power fold right now
Power fold now available!
Thanks for the video... dug all over the dash to find a power source for reverse
Glad we could help!
@@FernandoRodriguez-ds5ri yes if I remember rite it was the grey that connects to the fuse he pointed out in the engine compartment fuse box.
Thank you for the info. This was very helpful when I checked out my mirrors.
Glad we could help
After watching this I really miss my 05 🤣
Nothing like a Cat Eye!
Video was a great help, hard to find instructions on website or packaging though.
Excellent how to video! 👍
Heads up for anyone with a work truck silverado 2013. The Tubular handles that stem from the top of the window down to where you open the door have bolts behind the plating as well as the ones displayed in this video.
Thanks for pointing this out; the procedure for door panel removal shown here only applied to top trim trucks.
@@boostautoparts how do I work around that? I have a work mode 2014
@@brianmccarthy9855 There is a different door panel removal procedure - we are working on a new video which will be available soon.
Mirrors are very nice just received them today the only downfall is for the price they should come with the power folding option just like my buddies who just got his last week for a 2014 that come with the power folding option for about the same price
Thank you for the feedback. We do offer power folding mirrors for the 2014+ 1500, however the 2007-2014 power fold mirrors are still in development.
@@boostautoparts is there some sort of an adapter wire harness for the old models to use the new power fold option?
@@DJaktora The wiring and base is different. We are working on adding the power fold to the 07-13 models as of writing this message (5/10/21)
@@boostautoparts any updated on power folding mirrors
@@h-townstros9018 Please reach out to our sales team at sales@boostautoparts.com for the latest.
Great video - thank you.
Don’t test function before panel is plugged it! Found out the hard way. Panel has to be plugged in for switchbacks to work lol
Correct!
Inexperienced, what is the orange fuse in the fuse tap and what is it for?
The fuse taps have two slots; one is for the circuit you're adding and the other is for the original circuit you're tapping into.
Do you need to have defrost feature on oem mirrors in order for your product’s defrost feature to work?
No, you just need to have rear window defrost.
I don’t have that boot on the driver side what do I do?
I didn’t either (just installed them today) but I was able to poke a hole and run it through the boot with the hood release cable. On my 2013 LTZ it was right above the main wiring boot.
When will y’all have power folding ones for 2011 models. And can you move the mirror glass with the stock controls
We do not currently offer power fold for 2007-2014 trucks, however it is in development (no firm ETA at this time).
All of our mirrors DO come with the power adjust for the glass.
I have a 2011 Silverado 1500 LTZ, and really need the Power Fold feature for parking in addition to power extend but I have the smaller power mirrors now with turn signal and dim feature. I just need to know if these are available for a 1500. Thanks.
Power fold is now available!
I have an ‘11 1500 Silverado with stock mirrors that have defrost but no turn signals. Will the switchbacks work on mine?
Yes - you will follow this exact installation video
I bought some mirrors of these for 2009 Silverado 2500 but the lamps do not turn on with the lights only when the unlacking
Sounds like you might need our dual function harness. Shoot our team an email to sales@boostautoparts.com and they can get you setup with exactly what you need.
What mirror's do I need to get for a 2011 Chevy Duramax I like the white running lights with the yellow turn signals
Those would be the switchback option. You can check them out here: boostautoparts.com/products/2007-5-2013-gm-tow-mirrors?+Mirror+Install&Comment&CZcams
I did it the same way and my reverse light cuts on when head lights are on. Cut off when i put the truck in reverse.
Please reach out to our technical support team at support@boostautoparts.com for assistance
How about better quality door panels for those years of trucks. That would be a great upgrade
They are prone to breaking. I'll relay the idea to the development team.
So question, I got it all hooked up. Running lights work. Reverse lights work. But blinkers so not threw the mirror ..?
Turn signal should be plug and play - please email a video and your VIN to support@boostautoparts.com and our tech support team will get this resolved ASAP.
Will this work for non power windows and locks? Just curious how that would go about? Where would u hook up wire to? Or do I have to use non powered side view mirrors.
These are NOT designed for vehicles that originally had manual adjust mirrors. Please contact our team at sales@boostautoparts.com so they can guide you on how to get them installed.
I have these, everything works great but randomly the white/led reverse lights atopped working, any ideas why?
That's certainly not typical. Give our team a call at 765-831-2830 or email support@boostautoparts.com so we can get to the bottom of this ASAP
I have a 2011 Silverado 1500 LTZ with the power fold on the stock mirrors. I have a set of the 2015 style tow mirrors i want to take off my old truck and put on the LTZ. How would that work with the power fold stock mirrors and non power fold tow mirrors? I assume the wires on my tow mirrors will plug in like they did for power adjust and blinkers, but will i just not have a plug for the power fold option?
That would depend on the mirror configuration. Since the mirrors aren't from us we couldn't say exactly how it would work
If I don’t have turn signals in my mirrors now will these work if I run them right? I love the turn signals in Mirrors thanks for feed back
As long as you have rear defrost, Boost mirrors will be plug and play for signal
Does the orange wire need to be tied to the parking lights fuse? I would like my switchbacks to be a true DRL. As it is now, they only come on when my headlights come on.
We recommend the parking lights, but any 12V feed will power the lights.
I follow the instructions just like in the video my turn signal works but my switchbacks aren't only the turn signal part working
Please email support@boostautoparts.com with your order number so we can get to the bottom of it ASAP
How’d you figure it out, I’m having the same problem
Hooking that up to trailer back up….that will be on only in reverse right?
Correct
Instead of running the white wire to the fuse for the reverse lights, could I run it to the fuse for the cargo lamps and have it turn on and off with the switch manually?
Unfortunately not
I have the same exact wiring and harness as shown in the video and have everything wired the exact same and my running lights won’t work and can’t figure out why but blinkers work and the reverse lights work most of the time
Contact our support team at 765-831-2830 and they will assist in getting this resolved in no time! They know these trucks, because the own these trucks.
@@boostautopartswhat size fuse is in the fuse tap? Original fuse were a 10 and 15 what’s the orange one in your fuse tap?
@@JB-in5ig 5A
@@boostautoparts my running lights aren’t working but everything else is. I was thinking it was the fuse. I put the same size in that I took out the fuse box.
@@JB-in5ig If the mirrors are from us give us a call at 765-831-2830 and we will help you to get to the bottom of this right away!
Installed mine the exact way the video shows on my 13 Sierra, and have no white switchback running light, and no reverse lights
It sounds like you might have a bad connection on the gray wire. Email support@boostautoparts.com and our team will get this resolved ASAP
How do you connect both cables and make them one cable ?
You can use a splice connector or a butt connector
I have 2 black wires 2 white wires and 2 red wires plus the plugs on each mirror. where can I get a wiring diagram for the mirrors. way more wires than what you are showing.
The mirrors from us will have the same wiring as shown in the video. If they are from us and you have any questions send an email to support@boostautoparts.com or give our team a call at 765-831-2830 and our team can assist.
If the mirrors are not from us unfortunately we cannot assist with identifying the wires.
Installed my accordingly no turn signals
Please contact our technical support team at support@boostautoparts.com so they can assist
Hooked mine up and they work like there supposed to but my cab lights went out anything I did to cause that ?
It sounds like you didn't put the original fuse into the lower slot on the fuse tap. Reach out to our tech support team at support@boostautoparrts.com for assistance.
I just bought a 2008 regular cab/long bed Silverado work truck. It has manual everything. I have heard that even the WT models have the wiring for door controls. If this is so, I suppose I could get an inner door panel that has the controls from a junk yard. What is your opinion?
We do not currently offer an upgrade for that.
What's that orange wire for
Running light.
I have same mirrors but different wiring. White driving lights wont turn on any suggestions? Or dobu guys sell something that can power them?
If the mirrors aren't from us you'll more than likely need a harness. Reach out to our team for direction as to what to purchase.
Would the white "running lights" on the mirrors work at night time when my actual headlights come on? Or will they only function on the running light circuit? I believe that running lights is a circuit that is not functioning when the light sensor says its night time.
They will come on at night if you leave the headlight in "AUTO" mode.
Do you have to fully remove the door panel or could you fish it the wire out?
You could probably just hang the door panel, but we find it's easiest to just remove it.
I have a question do you still need to run the wires to the fuse box if you just get the basic tell mirrors because you have the regular small mirrors
If you don't want any of the lighting features to work you do not need to do any wiring
I have the work truck ls with manual doors mirrors etc, could I still hard wire newer mirrors with turn signals to my fuse box?
Our technical support team could assist you with wiring in the lighting features if you purchase the mirrors from us!
Do you just conect both mirrors for turning lights to the same fuse?
Turn signal is plug and play. The orange wire in this video is running light, and both of the wires connect to the same fuse.
I just ordered these for my 08 2500 duramax the mirrors now have turn signals and power adjustments is this gonna be a plug and play for the new ones? I ordered the same in the video
You will have to wire in the reverse light and running light as detailed in this video
So do you leave both ground wires for each mirror inside for the in cab ground? Do you pull both sets of orange and white thru the dust boot or just one set? And is that ground spot the same on a 2011 2500HD LT Silverado?
Yes, both gray wires would be pulled through and into the cab to be grounded out. The ground location should be the same for a 2011 - but you can use any good metal ground in the cab (NOT in the door).
You will need to bring the orange and white wires for each side into the truck, at which point you can splice the two sides together.
Feel free to reach out to our support team at 765-831-2830 with further questions.
Where can I find those fuse taps
We sell them on our site. Give our team a call at 765-831-2830 for assistance.
I don’t understand what the “switchback” function is. Anybody?
It is a light that changes from a white running light to an amber turn signal
This’ll work on 07 classic right?
No - that procedure is different. Check that out here: czcams.com/video/DgzJWfNTMZY/video.html
My bottom mirror isn't heated but I want one with heat is it wired into top heating so it's just plug and play ?
Yes - we offer the mirrors preconfigured with lower defrost and also offer just the glass if you already have the mirrors.
What size is the orange fuse on the adapter before you insert the 10-A or 15-A?
5A
Do they level themselves out? I know some Chevy’s they tilt up not sure if GMs do.
That is only applicable to 99-07 GM's - not these vehicles this video is about.
What were the orange and white wires? I have a replacement mirror that just has the cord/plug that came with it
The wire colors may not be the same as our mirrors. On our mirrors, the wire colors are as follows:
Orange = Running Light
White = Reverse Light
Black = Ground
Two Questions
I have a 2011 Sierra Denali & from my understanding you cannot run LEDs for your turn signals without getting hyperflash for the 2007 - 2013 Body Styles unless you run resistors. Do these mirrors come with built in resistors or are they error free meaning no hyperflash. Also, is there an option to get these mirrors with Amber running lights instead of the bright white Leds?
These mirrors will not cause hyperflash, and do NOT need resistors installed to prevent it.
We do offer the mirrors with an amber running light rather than a white running light. You would want to choose the Signal & Running Light 1.0 or 2.0 on our site.
Do you make a power folding version?
Not currently for this application, but it is under development. You can email sales@boostautoparts.com to be added to a list to be notified when they become available.
Power fold now available!
Your gonna wanna subscribe to this channel.
Thanks Gary!
It didn't have hyper flash? If so, how did you fix it?
Our mirrors do NOT cause hyperflash.
When the truck lights are on are the mirrors suppose to because mine just have the blinker light
If you purchased signal & running light or switchback from our website then they will come on with the running lights.
@@boostautoparts ok thanks
If my truck does not currently have turn signals and running lights on the mirrors do I need to order something other then these mirrors or does the harness come with the mirrors themselves
Hello,
Everything you need for the mirrors will come with these. If you had power adjust originally, signal will be plug and play for you.
I’m looking to get mirrors for my 2010 1500 LT Silverado. The only feature my mirrors have now is power adjust, I know for sure I don’t have rear defrost, and although the mirrors you offer have defrost it’s not something I’m too worried about. But will the turn signals work, if not what steps have to be taken to get them working? Thanks.
Yes, turn signal will be plug and play with our mirrors - so long as you originally had power adjust (which it sounds like you do)
Actually sorry I don’t have rear defroster but my mirrors have a defroster.
@@boostautoparts yes I do have power adjust and a single button for defrost for mirrors. Thanks!
when putting two wires into the butt connectors, do you twist the ends together or just have each wire straight going into the butt connector?
Strip the wires and twist them together, then insert into the butt connector and crimp them down.
@@boostautoparts that's how i ended up doing them, i finished installing them yesterday, biggest pain was getting the wires threw the door boots
@@lathanlang7922 glad you got it all taken care of!
That was for one side, how long did both sides take to install?
Depending on the build, most mirror sets take 1-3 hours to install for both sides.
What is the difference between the switchback 1.0 & 2.0?
Switchback would be a white running light, amber turn signal.
1.0 is a dim amber running light, bright amber turn signal.
2.0 is a bright amber running light, bright amber turn signal.
Reach out to our team at sales@boostautoparts.com or 765-831-2830 for any further questions!
Hi guys i have a 2010 1500 that im wanting a set of these with just turn signals. I currently dont have the turn signal feature on my mirror but i do have power mirrors and heated mirrors. Will these plug an play with my harness? Wanting to make sure before i spend 250 dollars and they wont plug into my harness. Also with signal only model where do i run my wire?
Yes these will work on your truck! Power, signal, and defrost would be plug and play. You would just need to wire in reverse and running light (if equipped) following this video.
how do i get the wiring kit?
Wiring comes with the mirrors. Give our team a call at 765-831-2830 or email sales@boostautoparts.com with any questions.
Have a 13 silv. When hooked up like this the lights stay on. Ofc when i put it in reverse they cut off. Anyone know this and have a fix?
Please email support@boostautoparts.com with your order number and our team will get to the bottom of it right away.
will this work on a 2011 Silverado 2500HD WT manual mirrors???
It is the same tap for running light and reverse, but the power adjust and signal would not work. Please reach out to our team at sales@boostautoparts.com for further guidance.
So the turn signals get wired to the truck harness?
Turn signals should be plug and play if you have rear window defrost.
does anyone know if these will work on a 2014 with manual everything? It's a work truck and i dont like the boring plain towing mirrors. I need some similar to these.
You can certainly get the lights to work on a 2014 with a fully manual setup. Send an email to sales@boostautoparts.com so we can help you out
Will you all be making any that are not tow mirrors with turn signals for a 1500?
We don't have any at this time, however I'll let our development team know of your interest.
@@boostautoparts awesome thanks. It would be nice to have a plug n play system with the turn signals and puddle lights
what´s the orange fuse next to the 10fuse?
Please email support@boostautoparts.com so they can check into this for you.
Ground location.... did you do in the cab or under the hood?
Check out the video at 9:04; it is grounded in the cab.
What's the difference between the 1.0 and 2.0 running light?
Signal & Running Light 1.0: The lights will flash as a turn signal. At night when the running lights are activated, the lights will operate at 50% intensity for running light, 100% intensity for turn signal.
Signal & Running Light 2.0: The lights will flash as a turn signal. At night when the running lights are activated, the lights will operate at 100% intensity for running light, 100% intensity for turn signal.
@@boostautoparts okay, but why would I want one over the other? What's the application use? I drive a strictly work 2500 HD.
@@ObsceneGreen It's personal preference. 2.0 is more obvious for the signal feature as it flashes on and off and has a brighter running light.
What is the driver side cake panel look like ?
That is the area near where the driver places their feet.
Did you splice the wires before you passed them through the firewall
Yes
@@boostautoparts do you guys sell anything that can help with that I just ordered the mirrors
@@tacos1308 You can use a simple butt connector, otherwise you could use a pair of our in-line splices. I'll link them below
boostautoparts.com/products/add-a-fuse-tap?variant=13538365276215
@@boostautoparts I installed just like this video and my turn signals and switchbacks do not come on.
@@tacos1308 More than likely you have an issue with your gray ground wire. Please send a video to our support team at support@boostautoparts.com and they will be able to assist.
great mirrors but horrible placement of the fuse coming off the mirror.
The fuse is purposefully placed near the mirror behind the door panel so that issues can be isolated from side to side on shared wires like the orange running light
what size fuse taps were used in the video?
Mini
My reverse lights turn off when I put the truck in reverse...I’m so confused
Please reach our to our technical support team; they can get this resolved ASAP.
What did you do to fix it?
Do it matter what fuse tap you get?
Yes - we sell the correct fuse taps for this install.
@@boostautoparts where can I purchase this and when I do
@@fernandotrejo1425 below is a link. Give our team a call at 765-831-2830 if you have questions or are looking for other small subcomponents.
boostautoparts.com/products/2007-5-2013-gm-tow-mirrors?+Mirror+Install&Comment&CZcams
@@boostautoparts I just need the fuse tap thing not the tow mirror I already have some
Are the mirrors for sell that you took off the truck?
We offer new mirrors only. You can purchase here: boostautoparts.com/products/2007-5-2013-gm-tow-mirrors?Mirror%20Install&Comment&CZcams
Installed mine and don’t have any reverse lights
The fuse tap is likely not making adequate contact.
try taking the fuse tap out and turn it 180 then plug back in
Do these have power fold feature?
We do not currently offer power fold for 2007-2014 trucks, however it is in development (no firm ETA at this time).
Power fold now available!
@Boost Auto Parts mine that I installed today are from scitoo. Everything is very similar but mine came with only two wires for the reverse lights. They're mounted on a 2007 Chevy Avalanche. I'm just trying to find a way to get the reverse lights to work. It's got a red and black wire so do I need to put the red wire only in the trailer slot in the fuse block and ground the black in the cab?
Hello,
Unfortunately since the mirrors are not from us we are not sure which wire controls what features. Beyond the video, we would not be able to provide any further guidance.
How did you connect the wires underneath the steering wheel so that there’s only one of each wire going to the fuse box?
You can splice them together using a variety of methods. Solder & Splice, T-Tap, Butt Connector, etc.
Will these work on a 2014 2500HD Denali? Thanks!
Yes!
boostautoparts.com/products/2007-5-2013-gm-tow-mirrors?Mirror%20Install&Comment&CZcams
Is there a power folding model mode this product?
Not currently, but it is in development! Follow us Facebook and Instagram to ensure you're notified when it's released.
Power fold now available!
Do the mirrors shake bad on these?
All tow mirrors will have some shake, but our mirrors are known for our quality and have a minimal amount of shake. Feel free to check out all of the reviews for our products.
Thumbs down. My wires are purple and black. And my kit did NOT come with any fuse connectors. Wtf
Hey Ry,
Did you buy the mirrors from us? Boost mirrors use the wire colors in the video and we offer the fuse taps. It sounds like unfortunately the mirrors aren't from us.
Did you figure anything out because i have a black and purple harness aswell
Mine are blue white and grey
@@stevecrystal712 did you ever figure it out?
That is way too much extra. They make mirrors just like this that are plug and play, no running wires all over the truck.
The additional wiring is for the running light and reverse light features. We offer signal only mirrors that would be plug and play for power adjust, defrost and turn signal.
Unfortunately since the running light and reverse features weren't offered in the older trucks there is some additional wiring required.