Thanks for this, thought my 6 year old dryer was needing replaced! Removed the back cover and pressed the reset button and it’s working perfectly! I am guilty of stopping mid-cycle, taken note for future ref 😅
I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Thank you! This worked for me. Dryer diagnosed and fix in 30 mins because of this video for £0!!!! I think it had tripped because of the condenser filter needed cleaning. Thank you.
@@ghostfacescrillaNGAwesome! I am trying it now, there is no audible click so I thought maybe it needed to be on. I will try again! Thank you for your response!
I have a vedette condenser. It doesn't have a removable panel with the thermostats, they are attached directly to the frame inside the rear panel, but just like the beko in this video, one had a little button. I pushed it to reset and presto! Good as new. Thanks for the tip on the secret button! Love your work.
Hi thanks a lot for your comment and I'm glad it helped. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand. I'm also employing someone now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Thanks so much. My tumble drier failed to provide hot air. I used your technique to find the thermostat and reset it. It worked! The condenser was full of wet fluff. Now cleaned and working.
Thank you so much great video with answer to my dryer not heating but otherwise working. Only warning is will add is my back panel had obviously never been touched so i managed to cut 2 fingers open when trying to remove the back. My fault entirely but anyone could do it the metal is very sharp.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Thank you for your video, which helped me a lot. The tumble dryer works!!! We have a different type, but it worked again. We had no idea that such devices could also be reset. It's only 4 years old and hasn't been used that much. I must admit that I did not know before that opening the door during the drying program affects the thermostat. Which unfortunately I did many times.I know now, thank you!!!, very important information☝️for me.
Hi your video is great and very informative . Good idea not to waste time with showing how it all goes back together. I have a hotpoint 7Kgb TVYL. Style. The heater simply stopped working so I suspect open circuit and you have given me good direction where to go
When I look at the statistics on the video, it does tell me not everyone watches the video past the point of what they need, but there are other people out there who do you need their hand held. And expect me to take them from the start all the way to the finish and as I have to assemble the machine myself, I might as well leave the camera rolling. The great thing about CZcams, you can always jump to the point in the movie that you want to see. Thank you very much for your compliments. @alanharperfirst please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Nice video after searching for a while, machine seemed clean enough but i cleaned it further, 2 loads later its cut out again, this manual reset switch is annoying as the machine can't be left open but also indicates an underlying issue that is causing the cut out and cold air problems.
glad you enjoyed the video @jamjam308 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Really glad I was able to help you Mike. I'm glad the video sorted out the no heating. You can always do me a favour in return What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @mikelaird6735 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Hi @Legends-CZcams2023 thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Hi how to repair. I've got a fault with my Beko washer dryer condensing machine. Washes perfectly well. Does not dry clothing. No heat created. I took the old off and set the reset button. Now we have heat but the motor or fan sounds extremely overworked noisy and a consistent noise comes whilst on, doesn't sound healthy at all, also the area where the thermostat cut of get extremely hot. The thermostatic button was cutting out before, but since resetting it, it doesn't cut out and although heat is being produced it doesn't sound healthy and um concerned maybe a fire risk due to the heat. Any ideas. I have taken a video to show the noise. The model is a Beko 7kg/4kg wdl742431w
Hi, great video ,is it the same for the other dryer that you have on the right? becaiuse i have same dryer with this issue it doesn't heat up, thank you
Hi, could you please share your full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Thanks for the video - any chance you know if there is one of these switches on a Samsung? It's not as easy as just removing that one panel on the back for my dryer. TIA!
Glad you enjoyed it. I hope it helped you fix your machine Wrinkly hands fix appliances, not algorithms! My videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @ELIT3KYL3 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Hi, I have the BEKO DTKCE80021W condenser dryer and it's not heating. I removed the back and found the reset button and pressed it but unfortunately, still no heat. All the filters are clean and lint free. Any other suggestions?
I'm not able to upload documentation to CZcams on your Pacific model number like wiring diagrams and so on so please use the contact page at my website if you need further help www.how-to-repair.com/help/contact-us/ looking at your tumbled dryer I would do a continuity check on the heating element to make sure it's good if I remember correctly there is a forward thermostat as well and an NTC sensor that needs to be checked. Also remember if you have any blockages on the pump system sometimes the heater will not come on because it's in safety mode, but if all, the parts have been checked and you know they're 100% working. It is possible for this printed circuit board relay that controls the heater to have become faulty.
We had a Beko tumble dryer… it burst into flames. According to the fire service it’s a known issue with Bekos. Fortunately I had a fire extinguisher. Beko were awful. They sent a guy round who admitted they do that all the time. We never had any further communications from Beko. Dodgy and dangerous.
Thanks!
Worked a treat! It's drying again - happy house!
Thanks for this, thought my 6 year old dryer was needing replaced! Removed the back cover and pressed the reset button and it’s working perfectly! I am guilty of stopping mid-cycle, taken note for future ref 😅
I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Thank you! This worked for me. Dryer diagnosed and fix in 30 mins because of this video for £0!!!! I think it had tripped because of the condenser filter needed cleaning. Thank you.
So glad we were able to help you it's always nice when something doesn't cost you anything
Do you leave the dryer switched on to reset?
@@ghostfacescrillaNGI am needing to know this as well!
@@TheAminat2010 I switched it off mate. Worked a treat
@@ghostfacescrillaNGAwesome! I am trying it now, there is no audible click so I thought maybe it needed to be on. I will try again! Thank you for your response!
I have a condenser dryer and this worked ! Thank you so much , saved alot of money at a time when I couldn't spend it.
Hi, can I just ask do you leave the dryer on to do the reset? Thanks
I have a vedette condenser. It doesn't have a removable panel with the thermostats, they are attached directly to the frame inside the rear panel, but just like the beko in this video, one had a little button. I pushed it to reset and presto! Good as new. Thanks for the tip on the secret button! Love your work.
I'm glad you found it helpful please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
This worked! Thanks! it took me 5 minutes and no £ to fix mine!
Hi thanks a lot for your comment and I'm glad it helped. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand.
I'm also employing someone now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Thanks so much. My tumble drier failed to provide hot air. I used your technique to find the thermostat and reset it. It worked! The condenser was full of wet fluff. Now cleaned and working.
You are right. I have just checked below the lint filter and there was a large accumulation of fluff. Hoover out, job done. Thank you.
Glad it helped
I had the same problem this weekend. Thank you for the upload as it’s working as it should know. Saved me time and money! Thank you!!
Thank you so much great video with answer to my dryer not heating but otherwise working. Only warning is will add is my back panel had obviously never been touched so i managed to cut 2 fingers open when trying to remove the back. My fault entirely but anyone could do it the metal is very sharp.
Reset the switch and working again perfectly, thanks so much for the great tutorial 😊
Thank you very much for this video. I have successfully restored my Beko tumble dryer.
Mate you just saved us $400 on a new dryer ....legend thankyou followed your video old dryer working again
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Thank you for your video, which helped me a lot. The tumble dryer works!!! We have a different type, but it worked again. We had no idea that such devices could also be reset. It's only 4 years old and hasn't been used that much. I must admit that I did not know before that opening the door during the drying program affects the thermostat. Which unfortunately I did many times.I know now, thank you!!!, very important information☝️for me.
Hi your video is great and very informative . Good idea not to waste time with showing how it all goes back together. I have a hotpoint 7Kgb TVYL. Style. The heater simply stopped working so I suspect open circuit and you have given me good direction where to go
When I look at the statistics on the video, it does tell me not everyone watches the video past the point of what they need, but there are other people out there who do you need their hand held. And expect me to take them from the start all the way to the finish and as I have to assemble the machine myself, I might as well leave the camera rolling. The great thing about CZcams, you can always jump to the point in the movie that you want to see. Thank you very much for your compliments. @alanharperfirst please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
clicked the switch and it's now working, thanks so much 👍
Thanks so much. Reset the button working fine now. Saved us 300 on a new tumble 👍🏻
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Nice video after searching for a while, machine seemed clean enough but i cleaned it further, 2 loads later its cut out again, this manual reset switch is annoying as the machine can't be left open but also indicates an underlying issue that is causing the cut out and cold air problems.
Thank you, because of your video i fixed my Beko Dryer.
Glad I could help @chrisoli8849 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thank you for this very very helpful video😊 saved me lots of money
This was awesome!!! I managed to fix it myself. Thank you for making this video ❤
Glad it helped! @naturallycats please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thank you! Worked a treat! a 2 min fix!! Wonderful
You're welcome! @paulkent7379 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
You are an absolute legend, Thank you so much for this helpful video. Saved me a lot of headache!
Hi pal, do you turn the dryer off completely when doing the reset?
Thank you, just fixed mine with your advice, Excellent video.
glad you enjoyed the video
@jamjam308 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thanks very much for the vid. Found the reset button and it did the job. Much appreciated.👍
Thank you so much for this video, you have just saved me £350! 🙏🙏🙏
Really glad I was able to help you Mike. I'm glad the video sorted out the no heating. You can always do me a favour in return What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @mikelaird6735 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Very helpful, was exactly as he said 😊😊
Will this cause my fusebox to trip.
Thank you for your valuable explanation and illustrations ❤️
Hi @Legends-CZcams2023 thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Hi how to repair. I've got a fault with my Beko washer dryer condensing machine. Washes perfectly well. Does not dry clothing. No heat created. I took the old off and set the reset button. Now we have heat but the motor or fan sounds extremely overworked noisy and a consistent noise comes whilst on, doesn't sound healthy at all, also the area where the thermostat cut of get extremely hot. The thermostatic button was cutting out before, but since resetting it, it doesn't cut out and although heat is being produced it doesn't sound healthy and um concerned maybe a fire risk due to the heat. Any ideas. I have taken a video to show the noise. The model is a Beko 7kg/4kg wdl742431w
Hi, great video ,is it the same for the other dryer that you have on the right? becaiuse i have same dryer with this issue it doesn't heat up, thank you
Hi, could you please share your full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Can you just try a blind reset if you don’t have a power meter?
Might be a stupid question but should the dryer be switched off completely to do this or left on?
Hi my Beko heat pump tumble dryer is working but intermittently making a screeching noise....any ideas?
Tried this fix but unfortunately it still won't heat up. How much ISH is it to repair or is it worth replacing? The machine is a Beko and 7 years old.
Thanks for the video - any chance you know if there is one of these switches on a Samsung? It's not as easy as just removing that one panel on the back for my dryer. TIA!
Without having an exploded diagram of the machine, I cannot remember off the top of my head
I have one of these control knobs thats on this dryer
Great video thankyou soo much
Glad you enjoyed it. I hope it helped you fix your machine Wrinkly hands fix appliances, not algorithms! My videos might not be CZcams superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @ELIT3KYL3 please remember to subscribe to our channel as that really helps us czcams.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thank you. Life saver
Glad we could help
Have u got a vidoe on changing the main wire on a vented dryer ? Mine js faculty..like when uts bent it will work
Hello, I've fitted a brand new heater element and it's blown the thermostat (the switch doesn't click) , any ideas?
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Hi buddy where side you get your meters from, have you just got them wired through the socket outlets
Hi, I have the BEKO DTKCE80021W condenser dryer and it's not heating. I removed the back and found the reset button and pressed it but unfortunately, still no heat. All the filters are clean and lint free. Any other suggestions?
I'm not able to upload documentation to CZcams on your Pacific model number like wiring diagrams and so on so please use the contact page at my website if you need further help www.how-to-repair.com/help/contact-us/ looking at your tumbled dryer I would do a continuity check on the heating element to make sure it's good if I remember correctly there is a forward thermostat as well and an NTC sensor that needs to be checked. Also remember if you have any blockages on the pump system sometimes the heater will not come on because it's in safety mode, but if all, the parts have been checked and you know they're 100% working. It is possible for this printed circuit board relay that controls the heater to have become faulty.
Legend!
Thanks mate 👋
👍👍👍Thank you
What if the botton is loosy goosy and dont click at all
I bought a new pc board, element but it doesn't heat
You did not include your model number so there is no chance of me being able to help unless you do so
We had a Beko tumble dryer… it burst into flames. According to the fire service it’s a known issue with Bekos. Fortunately I had a fire extinguisher. Beko were awful. They sent a guy round who admitted they do that all the time. We never had any further communications from Beko. Dodgy and dangerous.