as a long time o11 lover the h9 flow has exceeded my expectations i didn’t expect to like it so much more than the o11 especially with the lack of support bar
I do gotta say even when i havent made a single pc the h9 elite is deffinetly my fav case i always think bout prices but then there is my inner me SCREAMING for that case😅
If I had it, I would retain the top glass and remove the glass side panels. Probably would replace everything with Noctua fans (yes, even the shroud) and undervolt to get it as quiet as possible.
Make the switch. I just got done building in a gray O11D Evo and then came across this NZXT in the warehouse at my job. I think I know what I wanna build my next rig in.
At first I was going to get the h6 flow rgb but then I decided that I wanted the h9 elite, yes it is more pricey though I am very glad I got it over the h6
I think think the O11 was revolutionary, the lesser well known hyte y60, gave us a glimpse of what could be, when we O11 design is redone better, and the H9 elite is a mix of the best of both worlds, while maybe making a few sacrifices like the airflow, however the fact that these cases are quite expensive remains as is, hoping we get a budget all glass case, I know that sounds contradictory to logic, but still keeping hopes up.
I like the Y60 design a bit better. Usually these cases don’t come with any fans so on top of the already expensive price tag for the case you’re talking about another 50-100 for cheap fans. Or if you want fancy fans try 200-300. If you have the money though, the atrium or fish tank cases as I like to call them, is hard to beat looks wise.
@@xzaylu I know, but even for my current system (5700x + 6900xt), this case feels too expensive. Perhaps I just go buy this case for the lolz, then swap in my current system later
Ironically, it's because it doesn't have that corner support beam is the reason I'm getting an Evo O11 XL instead. I don't like glass next to or sitting on glass.
![Building My First Gaming PC with No Experience... [White Aesthetic]](http://i.ytimg.com/vi/Smw3FcZewaU/mqdefault.jpg)
i like the white corner way more than just glass,the glass top looks cooler tho
If your buying that level of case you probably have an aio or fans up there so there is really not much point
@@thebrightestdevotedfly7632 good point
And Not Good airflow with Glass
No
LLLLLLLL
Lian li purposely didn’t wanna make the top glasses part for a reason better airflow lol
This is the elite version. Thw flow version has mesh on top
@@aronPlays14 i think worse airflow is less „elite“ then better airflow
There are so many fans so I don't think it makes a different.
@@beefycroissant6485that's... not how it works. you need more ventilation whether you have more fans or not. the air's gotta escape somewhere
@@nicopinzel in most tests it's worse than the flow by 1 degree
tbh ill get an nzxt h6 flow rgb cuz its dual chamber and cheaper it looks crazy good ngl
I have it🎉
@@SniperPc. Same
I like the o11 better it seems to have a lot more structural integrity
Phanteks NV7 comes out this month… gonna be a very popular case
pc case does not have structural integrity you pretentious fucc
Ya do u guys know about the o11 vision
Airlflow just left the chat.
But an incredible looking case!
There is another version that doesn't have glass on the top
it has secret side vents, so the thermals are actually quite fine
@@mr.bamboozle3053same with the 011 too it has 2 big vents on its side and bottom
Please stop with these npc ah comments 💀
@@mr.bamboozle3053yup. I have the white elite version... cool case... might be little less flow but still really good with 3 side glass
I personally really prefer it with support corner. Without, it somewhat looks naked
SAMEE
Yeah same
I’ve always wanted to build a PC in those type of cases but money issues be going hard😂
Get the o11 mini then. Cheap case
Same
@@Abandonedacc38373bro cheap pcs are too ugly to be fitted in a good looking cases
@@stepcipher2849 depends
@@stepcipher2849 o11 aint ugly
I’ll wait for them to make a mini version
just get the o11 mini
@@leonardoc.1584 that’s what I have right now
Same. But i went with hyte y60 bc i was tired of the cramped nzxt cases. Working very well and was super easy to build in
I have o11 mini airflow
At this point you can just build your pc in an aquarium
So the same thing but with worse airflow?
That looks clean af
If they do a mini version, il will definitly swithc from my o11 dynamaic mini to this
where do u put the aio or aeo
It’s the holy grail of pc cases
I think it is a lot cooler, tho it would be better if it had holes in the glass, so the temperature would be ok
@ᴛᴇxᴛ ᴍᴇ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ@ mattykay0 Wow serious?! Tank you Sooooo much! What do I get tho?
Pc cases starting to look like modern showers
I like the corner support and being able to look down from the top. Too bad you could not switch tops
To be honest the nzxt case is one of the best cases for watercooling!
Nice oven
Ngl that glass line pisses me off more😂
H5 flow still takes it for me
I think i'll stick with my o11 dynamic mini
as a long time o11 lover the h9 flow has exceeded my expectations i didn’t expect to like it so much more than the o11 especially with the lack of support bar
I’ve been trying to get this case for 2 months but they haven’t restocked this thing in ages
I don’t wanna say it’s restocked but you can get one, I just checked. Only problem is they’re going between $350-$480 😢
It's available on amazon
It's has very less ventilation, and it looks cool but it traps lost of heat , and this happens in most of the NZXT cases.
You are a good man, I respect you bro
It's just a glass oven 😂
I do gotta say even when i havent made a single pc the h9 elite is deffinetly my fav case i always think bout prices but then there is my inner me SCREAMING for that case😅
the glass one one looks so cool, but i like the corner thing with the thing, it looks so fucking bad without that corner
Thats crazy. I have the o11 and I love it but this is a new entire level
As someone with the O11 dynamic evo you can remove the support column and I like it much better than the flow
I Like The airflow in The NZXT Case
This guy bought a very expensive case, just to consider if he is going to use it
Its very cool i would buy this case
Modularity left the chat, lian li has rubber grommets, upside down mode, adjustable IO panel, so much more
Nxzt looks like a aquarium 😂
Lemme get this straight, you bought the case. NOW you need to think if you should switch or not... crazy
I rather have the ventilation on top since I run my cooling fan on top and I don’t mind the white corner
The o11 vision enters the chat
I just ordered the h9 flow so excited to build my first pc
When you got know that this case costs more than your entire setup💀
fr
Nice case but 300€ way to much for a case tho.. (-:
Like ur voice & video, almost bought O11D gladly you remind me h9 thx
Nice PC bro
I think it might not have as much airflow if there is only glass
I made a switch to h9 elite from o11 and no difference in thermals
The hyte y60 and the NZXT H9 elite are my favorite cases
They said fuck airflow 😂 and it looks 🔥🔥
Got my new pc build today with this case and i love it ❤️
As a snow o11 mini user this prob nicer but airflow on top left the chat
If I had it, I would retain the top glass and remove the glass side panels. Probably would replace everything with Noctua fans (yes, even the shroud) and undervolt to get it as quiet as possible.
6500X corsair is good ?
I like the white corner way more and I’ve had this case it’s too open and doesn’t have that classic PC feeling
Y70 touch on top here from experience
Make the switch. I just got done building in a gray O11D Evo and then came across this NZXT in the warehouse at my job. I think I know what I wanna build my next rig in.
All I know about nzxt is they focus more on looks than airflow
Room setup tour
At first I was going to get the h6 flow rgb but then I decided that I wanted the h9 elite, yes it is more pricey though I am very glad I got it over the h6
🔥 🔥 🔥 …literally!
011 dynamic xl made that bar removable 😂 no more riveted bs 🤷 I literally just took mine out in prep for throwing everything in this weeked.
Hyte y70 touch sitting in the corner be like
I'm waiting for the Phantek N9, but feels like we've been spoilt for choice lately regarding glassy boxes
The o11 vision: 👁️👄👁️
I think think the O11 was revolutionary, the lesser well known hyte y60, gave us a glimpse of what could be, when we O11 design is redone better, and the H9 elite is a mix of the best of both worlds, while maybe making a few sacrifices like the airflow, however the fact that these cases are quite expensive remains as is, hoping we get a budget all glass case, I know that sounds contradictory to logic, but still keeping hopes up.
I like the border, because the new one looks like a fish tank. I think it would be better if the border was smaller tho
O11 seems to have a better airflow on the top part
I like the Y60 design a bit better. Usually these cases don’t come with any fans so on top of the already expensive price tag for the case you’re talking about another 50-100 for cheap fans. Or if you want fancy fans try 200-300. If you have the money though, the atrium or fish tank cases as I like to call them, is hard to beat looks wise.
Im gonna win a lot of money at the casino this weekend . I was wondering if they make custom PCs cases or towers out of rare wood and glass .
Better make the switch. The new case provides a better view for all your pc components
The support corner is better. Change my mind.
I wont cuz the NZXT one is a bad ripoff of the O11D evo
Plot twist: the case was actually a demo and you cant build a pc inside it
If I could I would maybe switch…
Th 011 as some quirks
360 mm aio fitted on top so how we can we see inside through glass 😂😂
I like the 011 dinamic more im not gonna lie
Meanwhile o11 vision:wtf
The h9 flow is basically the same thing for cheeper
Don’t do it, you’ll thank me later because the airflow is worse with the glass panel and I mean way worse
Cool design but bad airflow
Im gonna love to see the choking fan work 💀
Beautiful fish tank case
Love the case, buth it is just to big to fit in my desk
They shoulda had vertical GPU mount, my opinion tho
Case so nice, that i want to transfer my i3-6100 and 1050Ti into this case just
Same here might switch
300€ for a case come on. You should rather upgrade ur system (:
@@xzaylu I know, but even for my current system (5700x + 6900xt), this case feels too expensive. Perhaps I just go buy this case for the lolz, then swap in my current system later
For 300$ you can buy a used ryzen 5600x with a compatible motherboard ma friend..
there are really good cases for 100$ out there
Just keep ur 1050 until you can upgrade.
Build pc tutorial please?
But you can switch the Frontpanel of the o11D Evo to a Mesh one to get fans/rads there.
I personally think that the phanteks nv7 is better
I got mine. The flow version tho
the corner looks better tho
Too bad it’s NEVER in stock
Also cool is the no airflow
Yeah, only 3 to 5 years after the original case
Y60 on top tbh
Well, there's the 011 Vision though.
I want one so bad
It’s more comparable to the H9 flow but you know hahah and you can remove the colum in the o11 I’m pretty sure
you can have lian li o11 dynamic vision if u want to see in but dynamic evo looks better
Nice ❤
Ironically, it's because it doesn't have that corner support beam is the reason I'm getting an Evo O11 XL instead. I don't like glass next to or sitting on glass.
No. Its still the same generic glass box case,
Maybe.
It looks more clean and clear now
Make the switch, I still like the h6 tho
*Airflow left the chat*
I feel like The cooling is goona be bad