How to Replace Blower Motor Resistor and Harness 2007-2013 Chevrolet Silverado
Vložit
- čas přidán 7. 11. 2022
- Buy Now!
New Blower Motor Resistor Wiring Harness from 1AAuto.com 1aau.to/ic/DMHBR00013
This video shows you how to replace the Blower Motor Resistor and Wiring Harness on your 2007-2013 Chevrolet Silverado.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Pocket Screwdriver
• 5.5mm socket
• 7mm Socket 1aau.to/oaIB/1AXAA00017
• Trim Tool Set 1aau.to/oSW/1AXXX00006
• Wire End Cutters
• Ratchet 1aau.to/obcs/1AXAA00016
• Socket Driver
• Pick 1aau.to/oCH/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/ogR/1AXAA00280
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I have to jiggle the wires to get my heater to blow. Do you think the problem is a bad connection in the resistor or the harness? I know I should probably do both but funds are limited.
Both. The resistor is prob burned/melted from the harness. I have to replace both every year in my 05 Silverado. Doing it now in fact.
I changed the resister and not the connectors. Well, now I have to replace the connectors should’ve done both the first time 😅