How to install Electrical Earthing At Home - How To Install Ground Earthing | Step by Step
Vložit
- čas přidán 6. 05. 2019
- How to install Electrical Earthing At Home - How To Install Ground Earthing | Step by Step
This Video Show you How its fix earthing for house electricity
Pipe Earthing
How to install a copper grounding
Electrical Grounding
ground earthing for home
Music-NCS
Track: Debris & Jonth - Game Time [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Debris & Jonth - Game ...
Free Download / Stream: ncs.io/GameTime
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
instead of this nonesense music it was better to give us some explanatin
Nothing here should be explained. It's all about general knowledge and a little basic conductivity..
exactly.......we want to know wt materials u r using otherwise its a rubbish video
true,, best look for a video from someone else
Kasun Dhananjaya Nanayakkare it is not general knowledge if the general population doesn’t know what is being done and what is being used. Even you have asked questions so that was quite a pompous statement from you.
@@kasunnanayakkara793 You are such a fool.. You actually lack common sense..
We do it differently in Nigeria and it works. Thank you for sharing.
I brew my tea for 3-1/2 minutes. Sometimes I use a timer on my smart phone, sometimes a kitchen timer and sometimes just a wristwatch. It's nice to have a a little snack with tea.
What a total waste of time, no descriptions of anything.
Good Earthing require appropriate area for good electricity condectors, so salt , coal and water is used.Capacity depends on connectivity area.
Pipe type Earthing: For Pipe type earthing normal practice is to use GI pipe [C-class] of 75 mm diameter, 10 feet long welded with 75 mm diameter GI flange having 4-6 numbers of holes for the connection of earth wires and inserted in ground by auger method. These types of earth pit are generally filled with alternate layer of charcoal & salt or earth reactivation compound to reduce the earth resistance.
Not even 1 like for these much explanation are koi tho dedo ra😂
In what ratio Salt and charcoal to be used for conventional earthing
Nice Video. but you must Mention How much you dig?? Length,Pipe Size, copper wire gauge, layering thickness etc
Good work brother
Pls mention:- wire size and pipe also copper wire size thank you
Wire size mm will differ, depending upon the load you put. If 10kw then 16mm² ground wire etc etc. That's very thick ground wire. You can find measurements with you nearest wire dealer.
Soiltreat can be used instead of salt and charcole salt because due to salt the rod will start getting corrosion..instead use soiltreat compound which is as per ROHS std and is green and safe conducrive compound
That water should have been added along with the vermiculite and charcoal. Doing it at the end means that most of the earth will remain dry, and not provide an electrical ground.
Lo mejor del video y esta puesta a tierra es la perfección del hoyo.
Gave me an idea,💡💡💡! A water Well would make an excellent ground if it has a steel casing. (Not PVC)
jiosmartg com 👍👍👍
In U.S. nowaday, they nail a 6 foot copper ground rod into earth in addition connecting the ground wire to practical using current water heater pipes is a sure way to be grounded.
The method depend on type of the soil. In Les soil the method in the video is very efective.
Pipe is just a medium to pour water only, not to fill salt or any other items.
Yes is right
correct.
Thanks for sharing but at the very least give some description of what you are doing and why. I assume you used salt, charcoal, a galvanized iron pipe and copper wire with copper rods? What depth is needed? What is the expected life?
I know you put effort in creating this video, but as soon as I heard the music, that was it for me.
When I'm looking for technical information, I'm kind of hoping we'll get some narration of the problem we want to solve, its solution, and how to implement it.
I think this is the good way and they can get good earthing adding more salt and more coal can get more earthing
Very good demonstration on how to install a good but “sacrificial” earth ground in soil that provides a poor ground on it’s own. Of course there are some better chemicals available, but the salt and charcoal are very effective. Also taking a healthy pee on it occasionally helps too. I learned that trick working at remote tower sites in Texas. In some areas the phone line would be on a single insulated strand of barbed wire. At the tower in the remote location was a ground rod to make the circuit. When you picked up the phone and the dial tone was scratchy. You went outside and watered the ground rod. That fixed it every time:-).....
Earthing is required for good electricity connection.it will be solution for rectify high voltage and low voltage .in home if high voltage comes tv and refrigerator will be burn.and it will be very useful in industry.mainly in cell towers.electronic equipments need proper earthing to work well.
Thenk you
But that earth pipe will damage very quickly because of the salt, if he use zink cable to rotate the GI pipe will not touch the rust. Never use salt, totally wrong
Wrong, Earthing/grounding is required to save us from electric shock if we touch the metal body of a faulty appliance/device if the device is properly grounded the current flows to the earth and thus save us from shock.
Showing such important technical videos you must give explanations
Could anyone please recommend a video where earthing is done properly, without thousands of dislikes?? I don't have the expertise to judge by myself :(
This video is alsolutely correct
Yeah, after CZcams removed dislike option, it's very difficult to differentiate between right and wrong.
ok, we need that Y tools
And of course these materials are common everywhere and it’s simple to find them.
there is perfectly good handle on that cap he was trying to screw on, still uses a cloth to grip on a smooth circular cap instead of the handles
Buying a ground rod would be way easier. Your video would be cool if you added a cold water ground, ufer ground and bonded it all to the service in the panel. I guess you like to buy emt and salt for some reason.
What is the use of uploading a video if you are unable to reveal the full description of what you are doing. A useless effort.
very bad video &so bad music
Earthing is required for good electricity connection.it will be solution for high voltage and low voltage.in home if high voltage comes tv and refrigerator will be burn.and it will be very useful in industry.mainly in cell towers.electronic equipments need proper earthing to work well.
@@MarioMario-vr9fp
I think its a waste of salt. Salt not needed
This is definitely not necessary for just anywhere on the planet.
With such dry soil, you need drastic measures to reach moist places that do conduct electricity.
Over here, we just need a 4 foot spike, often less, hammered into the ground.
A fantastic video. Great. No need to explain to those who is working in this field
exactly
Or ya know, a solid copper rod at 8 feet deep buried below grade works well too, just pound in with a 5 pound maul
A ground rod would not work well in as dry a ground as they have. They are creating a better ground because salt draws moisture from the air. Salt water is a much better conductor than dry ground. The salt will keep it moist for a very long time therefore a very good ground system.
# Nice video
good effort and nice one thanks somuch
Steel fence rail, rock salt, vermica , dirt. In order as put in pit.
I would recommend in DRY areas adding a 3 Three inch or larger PVC pipe along side that you cap the bottom and drill 1/8 inch holes down the bottom half about 2 onches apart in a straight line to bottom then add a screw cap to top of pipe.
Leave top of pipe about 3 inches above ground.
After final insulation fill with water TO TOP.
After that check the water level every few days until you learn how often you have to refill pipe to keep area around grounding system MOIST to improve grounding
1:22 Annnnnd… now we add the magic crystals.
It's Salt
All wrong how can use salt inside steel pipe may be after one month pipe foild
You to fail
😂😂
It is not salt it is I don't know
@@abdulqadeerbhatti3048 that is real salt
Yes. U r correct. Gi pipe going to damage
This is the ultimate how not to install your grounding video!
@Will Swift this works for 240volt system prevalent in India. Don't expect much as this is not done by a professional company but some local technicians who know to get the job done albeit not technically the best. Hope you find the perfect method.
Hi, can I make the pipe earthing near my plastic water tank ?
Will it be safe?
Thanks you for the video . work system's different here in Italy we don't do it like this
Mustaphal Keita earthing is same everywhere. This guys are stupid. Don’t follow them. They have used salt and charcoal to fill the hole. Also used GI pipe instead copper. For build a real earthing we must use a half inch copper rod length between 3 to 6 feet in a wet surroundings. Thats it.
Looks like they used the top rail for a chain link fence, which is more readily available than a copper clad steel ground rod.
The crystals are probably sodium chloride (table salt) to increase ground conductivity, and provide a better electrical ground connection.
This works fine for the sandy soil they drive the ground rod into. For rocky soil, the metal tube would bend, crack and break with the first few rocks the fence rail encountered.
A good idea for improvisation or amateur field day set up.
Was the ground resistance measured- probably not.
Great work but u would have poured the water on the charcoal and salt be4 pouring the water
Road must be sold cauuper
eep1.25m
Kook salt must be layer
Fake!!!!!
was anybody else waiting to see the rice get cooked by the electrode
It is not rice it is common salt(NaCl)
Very nice bhai
Any material should not put inside the pipe.The pipe is used to put water inside the pit daily. Salt also to be avoided ,since it is corrosive .Only charcoal and soil to be added outside the pope ,surrounding it .Plenty of water to be added while layering soil .
Steel fence rail, rock salt, vermica , dirt. In order as put in pit.
I would recommend in DRY areas adding a 3 Three inch or larger PVC pipe along side that you cap the bottom and drill 1/8 inch holes down the bottom half about 2 onches apart in a straight line to bottom then add a screw cap to top of pipe.
Leave top of pipe about 3 inches above ground.
After final insulation fill with water TO TOP.
After that check the water level every few days until you learn how often you have to refill pipe to keep area around grounding system MOIST to improve grounding
best electrician of year
@Gary Johnston ha ha ha
Super sir
Agreed like to know exactly what they are doing.
You can buy rod, its more easy...
Sal, alto poder de condutividade, problema sal, alto poder de corrosão. Necessário fazer manutenção periódica.
Opa beleza, queria fazer uma pergunta pq sou meio leigo a respeito de aterramento, mas o aterramento não é pra quando houver alguma fulga de corrente ou algo assim ser descarregado na terra para não danificar aparelhos e até evitar um choque ?? Se o sal aumenta a condutividade isso não iria fazer com q se houver alguma fulga de dentro da residência vai direto pra esse ponto ou seja o sal é assim evitaria maior problemas.desde já aguardo contato aténciosame Alexandre Alves meu whtas 67 9 92078702
@@alexandrealvesm.dasilva6686 OPA , não sei se minha explicação vai te ajudar tecnicamente mas vamos dar um exemplo prático. Imagine um simples circuito em paralelo de dois resistores de valores diferente. Um de 100 ohmse um de 50 ohms como os dois estão em paralelo por onde a corrente vai ter mais facilidade? Resposta o maior fica sem efeito o menor será o caminho escolhido. Bom agora a sua pessoa é o resistor de 100 Ohms a haste do aterramento é o resistor de 50 Ohms. Intao se seu aparelho tiver na carcaça uma figa ou um fio esbarrando. A corrente segue para haste aterrada e você se livra de receber o choque. Por algum motivo que o aparelho produza. O aterramento e para facilitar o desvio Da corrente, serve para te proteger dos seus aparelhos elétricos comuns, chuveiro , microondas, ferro elétrico, geladeira. Serve também para para raios. E por último se tiver acontecendo isso está tendo fuga de corrente e isso implica no consumo de energia elétrica, essas são as aplicações mais usadas. Espero ter colocado um pouco do meu conhecimento. Abraços.
👌👌
what exactly did you put inside the pipe/tube? That white powder-y stuff?
any body, did they ever say what they poured down the hole? It looked like salt and carbon.
Are they trying to make a battery?
If they said anywhere I didn't hear. I actually surprised myself and listen to 2 minutes before I HAD to mute the audio. What a waste. Step by step, maybe if you're physic
waited 3.25 minutes , couldn't take it any more
Mixed salt with chacoal after then used
rasika harikrishna
the background song is useless/pointless and annoying
Mob no. Of contractor is required. Good job done..
Verygood
In electric terms all things can be measured. I would like to know how many ohms I can achieve with this.
What does that even mean? How many ohms you achieve with doing an extremely bad and dangerous grounding method?
Should have added a good location to dig the hole. like the safety measures
روعه
Just. Drive 2 - 8 foot ground rods.
LOL MAY BE THERE TRYING TO GROW A SALT TREE. SALT .
Ok sir
I'm in the states this would never fly a steel pipe and copper wire don't mix galvanic corrosion this is all when used to number eight rods copper six feet apart tied to the panel and then jumped the meter for water that's how we do it whole thing could take about 30
Thanks you very much.
Hello. is it salt and coal?
👍
I like that hammer.. but I don't think it would last very long.. hehe THE MAX
How much kw shall we connect for this?? How to test its working capacity? ? Shall we mix 3phase with single phase? ?
Ground is ground. It doesn't short out the three phases. Ground connections are isolated paths. You can connect any amount of plugs and switches as you wish. Because, as long as your RCCB would not allow any curremt above 50mA to get grounded. It will shut down the whole system automatically.
Can we use MS Pipe for HV Pipe earthing
Nice
Niec
Salt plus vinegar
i just got rick rolled for 10:25,lol ,,
Dissimilar metals will corrode.
Its different in Nigeria. I will upload the nigerian type of earthing soon
Won't the salt corrode the GI Pipe fastly?
Mitti nahe...rethi (sand)se perfect erthing Jada din Aayega..
Rather then the Background Music should have been voice Explanation😔😔
Sir
Kya aisi earthing ho sakti hai Jo 2ac 1.5 ton
ac ka load utha saky
Meray 1 phase hai only
this pipe alone can energized power...its a pipe battery
২ ঘোড়া মোটর চালানোর জন্য বিদ্যুতের খুঁটি থেকে আর্থিং লাইন নাইনে নিজে কিভাবে আর্থিং লাইন বানাতে পারবো❓❓
good
Before putting the pipe into the hole what is inside?
Cicahem sakalinten udunge rangep bebenguk ne.
अरथिंग के पाईप को जमीन से 10 सेंटीमीटर ऊपर रखना है बाकी ठीक है
Did you know, on Mars, they call this Ground Marsing
Just hammer a 2m road in the ground perpendicular and will work just fine.
Instead of music u could have made the video informative by providing details of the procedure
It good idea but wat is the use of dis
How it's works
If language prblen
Any state persons will know english
Then do english sub titles videos
I have taught this sort of thing for 40 years and have no idea what is going on in this video.
They add coal and salt which is wrong. Earthing need no material.
Rice with charcoal???
not the first time that wood hammer has been used judging by the pre-existing dents in it.
What is the white granule and it's purpose?
how did they drill the hole?... measurements... are we sure its salt?.......
Watch this video on Neutral and Earthing difference:
czcams.com/video/_vQjHEXh6XI/video.html
After you waste your time building a salt and chip pit with #14 wire the electric inspector red flags your install and you start over...but you made a mud pie.
What is dai of 65mm*3m log pipe earth pit evacuation
Inside salt wrong .pipe bottom drill some holes around the hi pipe
Not suitable use cause rod not sustainable for long time and fast to rust. Reading must get below 10ohm.
This number 1 nest
Bhai detail main batao kia kia material use hway hain
Was the white thing salt urea?