AtGames Legends Pinball Arcade Control Panel Review
Vložit
- čas přidán 10. 05. 2021
- AtGames Legends Pinball Arcade Control Panel Review
In this video I'll examine my newly purchased AtGames Legends Pinball Arcade Control Deck and go over why I bought it, and how well it works after installed.
AtGames Legends Pinball Arcade Control Panel: bit.ly/3o9Eeuz
AtGames Legends Pinball Machine (Sam’s Club): bit.ly/2OojIIG
AtGames Legends Pinball Machine (Direct): bit.ly/33n340e
Visit www.arcadegraphix.com for custom artwork! Promo code: "cooltoy" saves 20%
Nailbuster’s PinUp Popper Baller Installer: bit.ly/2R0Xzle
AtGames Video Input Backglass Switchboard (VIBS) • [ATTENTION: SEE NOTES ...
AtGames Arcade Control Panel for Legends Pinball: bit.ly/3twWdvM
HDMI Slim Flat Cable, 90 Degree Downward Standard HDMI Male to Male: amzn.to/33rsXMC
Thin Ribbon Standard USB A Male 90 Degree Angled to Standard USB A Male: amzn.to/3erdWjW
HDMI Extension Cable 6FT Male to Female Cable: amzn.to/3bdaaZx
Amazon Basics USB 3.0 Extension Cable - A-Male to A-Female Extender Cord (2 Pack): amzn.to/2RvAHdE
The "Backglass" screen I used LG 22MK430H-B: amzn.to/3vS7XKU
Click Here To Subscribe: bit.ly/2OoPsJa
Join The Facebook Group: / youtu. .
Join The Discord: / discord
Follow me on Twitter: @cooltoy_23
Follow me on Instagram: @cooltoy_23
If you would like me to do a video showcase or review of your products or for other business inquiries, send me an email: cooltoy_23@yahoo.com
#atgames #pinball #retrogames
Some of the product links in in this description box are affiliate links. As an Amazon Associate I earn from qualifying purchases. - Hry
What do you think, is it worth your purchase, or is it a waste?
AtGames Arcade Control Panel for Legends Pinball: bit.ly/3o9Eeuz
@Cooltoy. No problem having all the controls recognized in Joy2key? Because when I plugged a USB wired Xbox 360 controller, where the control deck would connect directly on the mainboard, nothing was getting recognized in OTG on the PC interface.
I just got my machine and added a PAC-Man UCE to try out. It played awesome but the built-in game pad sucks to use so yeah I’m already in on pre-ordering at the $200 price point. I may be a chump for paying $200 but I have 1500 free games to try out so I’m ok with it.
Are you kidding me ? This control panel must be listed in the dictionary as a no brainer by definition!
@@albro8853 I’ve had no issues with joy2key, everything is recognized and is easy to map
@@albro8853exactly
That footage of Aero Fighters basically sells itself. I also like how well in blends into the machine.
Nice work adding the scan lines to those classic games...looks great!
I got mine a couple days ago and it was definitely worth it for the new exciters that don't rattle like crazy.
I have it preordered. Can’t wait for my notification. Thanks for the review Doug.
Enjoy!
$100 is the sweet spot for this! Great video Doug!
Thanks Hollywood
I look forward to receiving mine. Shouldn't be too much longer to receive it. Got it on NOD $100. Love having that option of playing other games on this At Games Pinball.👍🍻
Preordered on NOD for $100... Looking forward to an update on this as to when they will ship. Good review, thanks! Need that Rachael board too!
Rachel board goes on sale this Friday I believe
I also pre-ordered for $100 during NOD so I'm plenty happy ... that is once I get it 😉
As always CoolToy nice straight forward review.
That $100 jump in price after NOD was over is just plain silly to me
Excited that its a working mouse too. Cant wait for my preorder to be available.
more stock should be available in early June last I heard
Damn, that machine is fire flames 🔥🔥🔥... Job well done sir
Much appreciated 👍
Cooltoy: could that custom build be further pimped out? Me: Yes, but that machine was already awesome before the upgrade!
Just ordered the machine and controller 👍😎
Kudos on your modded ALP! I'm so jealous.
Thank you 🙏
Cool great review CT
Thanks for the Review, COOLTOY! I locked my price at $100 during NOD. Haptically Speaking, I'm happy to hear the Exciters are more exciting on this Control Panel lol
It’s a night and day difference vs the OEM ones, you’ll notice it instantly.
That looks beautiful playing aerofighters on that.
I love that game so much. Played it all the time at the local pizza place on a big red NEO Geo cabinet
I thought the same thing at first. I'd only be playing pinball games on it but using a USB stick controller and playing 1943 pacman frogger and more I want to get one especially for the trackball. My exciters were broken out of the box so I'm hoping since these are an upgraded exciters I can have the real feel of pinball. I'm paying the $200 price tag and if it all works it'll be totally worth it instead of spending time modding a joystick into the alp.
Beautiful 😍 machine and the setup awesome plus otg with steam deck Possibilities are endless 👌 for gaming 😀.
Great review 👍. My favorite games are vertical games like time pilot, Ms pac, galaga, frogger. Does Simpsons bowling work on add on feature?
Not that I’m aware of, last I heard it ran crazy slow on the ALU via add on.
Good review..some people like to have a bunch of cabinets with 5 games on it
Different strokes for different folks, whatever makes people happy
Damn that is clean! 👍
Thanks!
Those buttons ... sounded like The Conductor from The Polar Express punching tickets.
Seriously though, that thing looks awesome. Can't wait.
Yep, like I said these micro switches are definitely noisy, gonna wake the house up if you’re hitting that fire button constantly.
Worth it! 💯%
Can we get a tour of your game room!?
I definitely want it but willing to wait until atgames has a sale on it. Wife is ready to drop $200 for dads day and/or birthday for me but told her to wait.
Do you have a video of how you added that DMD?
I just ordered my pinball game, coming this week. Can you point to what we need to do to get all the games that you showed on there (pac man, donkey kong, etc?) Is that a third party mod?
Seems like $150 would be a much more reasonable price point for this, but if I had a Legends Pinball, it would be a must-have for me!
The control panel should be sold as pro version of the legends gamer mini.
Concerning the vertical games on the playfield monitor... aren't they stretched from 3:4 to 9:16 aspect ratio? They must be, but they don't seem that stretched here (maybe it is the viewing angle).
Aspect ratio can be changed and manipulated in MAME settings pretty easily. Lots of options available to situate the game to display however the end user prefers it to look
Dude i have mine in box for the past year im not taking it out till i move thus being said have u done anything to the entire unit itself other than graphics?
The trackball is good for bowling games and ski ball
Are you using the stock backglass?
How do you access 2 player mode on games like Galaga, Donkey Kong, and Pac-Man? there is no P1 or P2 buttons. Thanks in advance.
Love the shirt bro.
thanks, it's my favorite comic book of all time
Bro. Garth ennis' punisher run is my favorite punisher run ever
I’m fairly new to the AtGames scene having just got my table from NOD. Can you tell me how you are playing games like Simpsons Bowling? Is that OTG with Steam? Didn’t think the resident HW would support it.
Playing the games off my PC via OTG
@@cooltoy can you advise best place to get those games? Is it Steam or something else?
I'll pick it up if the price drops just for the upgraded exciters. Mine sound horrible with the popping sounds.
You’ll enjoy the new ones I’m sure
Wow...those buttons are REALLY clicky.
@cooltoy what are the 3 loose wires in my unit? 2 dual wire connections. Red/black, yellow and black and white and black.
Hard to tell what you’re talking about without a picture
@@cooltoy 2 of them come from the front panel and one from the side. I added a picture on the arcadenet Facebook page
@@cooltoy is there a way I can send you the pic?
Is there a mod of some kind to be able to switch between a 4 way and standard joystick? Things like Pacman and other 4 way directional games tend to be tougher. It would be nice if there was a one solution to this.
There is a electronic 4 to 8 way gate switching device that was created recently. Glen’s Retro Show is also making one for people to buy in the near future
@@cooltoy hopefully someone Etsys one together for the pin. I will buy it.
How much $$$ do you have invested in this machine?
been collecting cabs for 20 years... why didn't a ever think of getting a virtual pinball cabinet for also playing vertical arcade games?! 🤦♂️😆
I am looking at getting one soon, and do know that this video is a few years old, but the back display looks much different then the current Legends pinball HD. is this a mod or is this how it came with this model?
This machine was heavily modded by me
@@cooltoy Yes I jumped the gun, seen the video screen mod. Thanks for the super fast response. Still considering it, since its on sale now.
Looks pretty sweet.. but not as sweet as the new Stern Mandalorian pinball machine
Totally agree, that new machine looks gorgeous. Wish I had a rich uncle 😆
@@cooltoy Don't we both! Then I would wishing for more room! Lol
Dude! Your machine is now perfect love everything you've done with it looks incredible and it's amazingly functional! I used to own an original Data East Simpsons pinball. I instantly recognized your topper.... LOL. Great Job and great review.
June arrival
Not too far off now
any sign of the backbox switcher board yet?
Isn't that the atgames vib rachell board?
Kinda wish I got this on NOD for $100. Can’t see spending $200 though.
They’ll be some sales around E3 time I would imagine
To Run the PinballFX3 I have a little LAg on the paddles should I upgrade the Ram ??
OVERALL I LOVE THE SYSTEM... AND ITS WELL WORTH THE COST .. ARCADE ! UP AINT GOT SHIT ON ATGAMES
Ram should be around 8gb minimum for most virtual pinball applications, the more the merrier though. The legends ultimate machine is currently suffering with some frame skipping issues through OTG that they are looking at trying to correct with a firmware update. Many people are experiencing this on their AtGames pinball machine and incorrectly perceiving it as lag, when it’s something else entirely
@@cooltoy TY for the quick reply..
Which digital pinball table is the best from the main three?
That's something only you can answer. May a pros and cons list of each machines features and price point, decide which features you value the most, and then boom, you have an answer
@@cooltoy Price isn't the problem just want one Digital Pinball machine and was wondering since you had experience with LL three is all.
Is that the standard monitor it comes with?
yes
I bought it today but how do I get the games to play on the rollerball and joystick I have no idea ??
You’ll have to specify which games you’re referring to. Built in games on arcadenet, games from a usb drive, or games you’ve got running on a pc connected through OTG?
@@cooltoy OK I guess what I was asking was is there any of those games on the pinball machine already that work with the joystick or rollerball ? Or do I have to buy them separately, I bought that special today the pinball machine the joystick attachment and the extra pinball boards so I don’t know anything about this I wonder if it has anything to go with the joystick and rollerball built in ????
??????????????????????????????
the arcadenet games work natively with the control panel, as does navigating through the pinball user interface menu. But other than that, you will have to add your own games either through USB Add On or through OTG to fully utilize the potential of the control panel
@@cooltoy do u sell a usb drive with games ? I saw some on ebay, but there are too many to choose from, then a seller on ebay told me to do research before i buy from him, wtf, lol, what does that mean 🤯 i dont want thousands of games, just maybe 100 or less, can u recommend any or possibly make me one, i will pay you 👍
It seems like CoolToys mod doesn't switch back to atgames wall garden?
What the heck is an AtGames wall garden?
@@cooltoy The Legends Pinball tables that came with the cab. Can you switch it back using BVIS board or you skinned the whole original internal?
I'd probably get one, if i could find the freakin pinball table anywhere! Its sold out everywhere i look.
buy direct from AtGames, they literally have a countdown timer showing when their next wave of machines are available for order. They've sold 3 waves in the last 30 alone, so it appears you are likely just looking in the wrong place to buy one.
@@cooltoy Sweet I'm going to try that out. I'll blame it on you when my wife flips out, lol.
Are the arcade games built into the the control panel ? If not how did u get the arcade games
No games are in the control panel, only the control components themselves. Arcade games were manually added to my PC by myself.
@@cooltoy do you have video showing how to install games
@@truebengalsfan no
@@cooltoy how did you get the arcade games on there ?
I’d faint if 8 year old me saw that in the house!
100 bucks to 200 is a bit of a jump in think. Are you running a PC? Or at games hardware?
Technically both
I'm starting to think this pinball machine is better than Arcade1up.
🤘🤘🤘🍻🍻🍻
* makes sad little pining noise from the UK *
I’m still tempted by the original Legends, but not to the tune of £800 (about $1120). It’d need to be perfect for that (with things like proper CRT filters).
This is very cool and in my opinion a must have for the Legends Pinball but Omg $200? Like American dollars? XD that's gouging plain and simple. Those aren't even quality components.. Even if it was all sanwa and a worth while trackball it wouldn't be worth anywhere near that. A shame too, this machine has so much going for it, but really sometimes if feels like they are just taking advantage of people.
100$ sounds about right
$150 seems a doable price for them.
Would have to replace the buttons. Too noisy.
I don't own a Legends pinball machine (ironically enough I want a smaller machine. The current model is too big for my needs) but even if I had one don't think I'd get a control deck. I want my pinball machine to play pinball and think the control deck just detracts from the look. Plus $200 is just too much money.
Terrible item cannot use it with any arcade games otg for the 4k atgames pinball do not buy not being used ! Worthless