Googan Baits MELTDOWN: Remelting Googan Baits and Pouring New Soft Plastic Lures
Vložit
- čas přidán 4. 06. 2020
- Affiliate link for AWESOME Pigments:
www.dipyourcar.com?ref=774
Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
Visit us on Facebook & Instagram!!
LIKE & SUBSCRIBE
#googansquad #luremaking #googanbaits - Sport
Thank you for watching, which remelts were your favorite???
All of them :)
thanks!!
Punch bugs
Punch bugs for sure
Hell yea
*Altogether a well made lure **enjoyable.fishing** recommend it’s the skirt seems to stay on well and the whole thing is bigger than I thought it would be. The 2 metal have a nice plating on them as well.*
Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit czcams.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.
Considering how long it takes me to get my googan baits, my heart sank when the scissors came out 😂
my bad
no kidding, these things are getting hard to find
Good vid
@@derricksnyder6535 lot of them at bass pro and dicks
Oh how much I’ve been wanting a new video from you every hour since the last one😂
haha I appreciate it more than you know, thanks for the enthusiasm.
Looks excellent! I have been watching a ton on your videos. Really enjoying them.
I’ve been waiting for this
👍🏻
hope you enjoy man
You should partner with some of these companies and start your own starter kit for people who want to get into this and sell it... I'll buy one hahaha
Yes please!
Love the videos that you are using actual bait to meltdown to reuse. That has been very helpful information as I am starting out new and want to reuse
Glad to help
I love watching your videos for tips and tricks
They all look great!! Just got my molds in, going to remelt all my old baits, probably 200 lbs worth
dang!!! thats mega
Wow, that will take a while, good luck!
World's Worst Fishing will a summer long project, maybe longer
Good luck
Precision Angling ez 9’
Man I don't like the googan squad but I gotta say their soft plastics kick ass
Great video .can't wait for more
I've been waiting for this.
Awesome molds .
More to come!
@@WorldsWorstFishing looking forward to it
Awesome work!!
I love the re-melt videos so much
thanks man
Wow. Outstanding remelt. I bet anyone in here would buy those. Good job sir!
Hey Chris. Love the content ! And would love to see more rod builds . Keep up the good work !!
Thanks! Will do!
*Great item. First cast out of the package caught a nice bass. Pulls smooth in the water and sets up nicely immediately upon retrieval. Worth adding to your tackle box.*
I never knew I wanted to make fishing lures XD So satifsying!
its the best
I got some saucy swimmers for the first time last week. Man I really like the smell of these things. As weird as it sounds I'd buy a candle of that saucy swimmer scent 👍🏻👍🏻
they smell great
I'd compare it to black licorice.
Jeremy the smell is anise oil, which is used in licorice candy
@@kboutdoorspnw3147 it isn't just anise oil. My grandmother makes spiced cider every christmas and anise is one of the spices, this does not smell like that spice. It has a more sweet smell, with something else mixed in there.
@@DustyTheDog They smell like the candy Good & Plenty imo
Been waiting for this one!
thanks Lane
WOW!!! Those bandito bugs you put the extra blue in were AMAZING!!!! Nice job, Brother
Glad you enjoyed
That Swimbait at the end is amazing. I also like how their craw went from Krackin to Kraken with that octopus mold.
Liked them all. The laminate punch bugs were my favorite
Yessir I’ve been waiting for this
right on
you should get the epic pud mold from Marling baits and do some glow in the dark lures
I have my own line of hand pour swimbaits with Angling Ai...keeps me busy enough
Th epic pud is by Epic Bait molds, they just partnered with Marling to promote it.
@@DogDudeDrone marling designed it tho
Love those swim baits. Great as usual.
Glad you like them!
Video was awesome! Subbed as soon as I heard your drumroll!
It's very cool that u can make your own lures. I wish I could do it
When this video started I was thinking "this is gonna suck". But I like this guy. Thanks for the video
First vid I've watched of yours. I was definitely considering subscribing after about 6 minutes, but at 9:45 seeing as your a fellow rhythm section member that pretty much sealed the deal.
Man those came out way better than I thought they would being melted down.. those punch bugs are the best in my opinion .. awesome awesome awesome 🤜🤛👊👊👊
Glad you like them!
Googan Squad Best Squad
Love 'em or Hate 'em, the Googan's redefined the marketing side of the professional fishing industry. More young people than ever have taken up fishing again. Rob & Hector being the brain child behind the idea... A lot of hard work went into building this brand that exploded overnight... I believe you will see it around for years to come. Yes, the original Ragetail patent was used on the first generation, but the Googan's later redesigned the tail on the Bandito Bug & Crack'n Craw. The new packages have Patented Applied For on them. If you can find an old package and compare it. The 2 packages show the difference between 1st gen & 2nd gen. The Bandito Bug is their #1 seller. Thank you for sharing.
yep, they created a whole new way to market fishing
Liked all the results but favorite remelt is the smooth worm on the left. Great stuff!
Thanks
Pizza sounds good. Awesome outcome. Great work as always.
It was!
That’s a very good idea!
That dual color is awesome
Great content as always!!!!! I haven't even watched the video yet.. Still on the adds lol ik it will be good!!
the ads make it all possible! haha
@@WorldsWorstFishing sometimes but i fight through it!!! Lol
I really need to get some molds. I've been looking but not sure where to get them from. Any recommendations greatly appreciated!
Ok thanks, I’ll look around.I’m the Swat Baits guy by the way. Very green at this but trying hard and learning a ton from you. I appreciate all your vids.
Glad to help
I like how the worms came out. (hand pours) Good video as usual!
thanks buddy
As soon as you pulled out the Ralph Hardimon’s I liked and subscribed. Lol
First of all, take it easy, hello, I'm Mustafa relieved, I'm watching you and admiring the products you've made. I'm grateful to you for being informed and giving us information while watching you. Do you mix a component as a mixture, thank you, take it easy 🙏🙏🙏🙏
Great video how you deal with the bubbles when you melt it, a clear coat help but no enough, Thanks
u need a vac chamber to remove bubbles
I like that worm mold you have. looks awesome!
Thanks!
If I were going to start making my own plastics what molds do you recommend? Also is it necessary to have doors open or can a fan or two running be enough air circulation?
dang those creature baits look so good!
well I appreciate you walking us through this and im sure ill use this as a method for the googan baits I do get once the fish chomp them up lol but for science there must be a sacrifice!
Those laminate punch craws were straight 🔥🔥🔥🔥🔥
Great looking baits!!
Thanks 👍
Cool video! Those frogs turned out looking nice. Edit: all the baits turned out really well!! It would be really cool to learn how to do what you’re doing.
Awesome video. I like the laminates the most. That mix of colours just pops.
Do they still keep the anise scent from that slaunch sauce from the original googan bait?
Great job enjoy your videos
Glad you like them!
Love your channel, have watched every video. I'm about to get started making soft plastics, could you do a video in using cut up re melts for colorant in straight plastisol? I'm curious if this is a way to make plastisol stretch while saving on colorant.
awesome video brother. hope lakefork fishes with you one day haha
Maybe one day!
Where did u get the bags
love the video. how did the anise hold up?
i just stumbled apon your channel and im hooked!!!
Awesome to hear man! Welcome
Not the Cheeto bandito!!!!!! Anything but the bandito. Lmao
I'd kill for some of those ribbon tails. And markings Nate's octopus as well. He's my favorite dude on CZcams.
where did you get your molds n injector stuff ty?
What brand of colorant is best to use?? Also, should I use standard colorant or Non-Bleed colorant??
My first time watching your channel love the videos
Glad you like them!
I have the 4 inch angling ai swimbait mold will you be doing any videos on that.
Love your videos, keep up the great work. I'm starting to make soft plastics because of you. I have a question, what kind of mold would you recommend that is similar to a Keitech Swing Impact(not the fat one)? thanks
great to hear...not familiar wuth any keitech knock offs
Comes with case, good quality and great pricing
I just found your videos. I've never melted plastics before but always hate throwing old baits away after they're beat up. Do you have any good videos for just getting started with melting/molding?
Nice! Can you turn the blending block while you're pushing and see what that would look like. I've always wondered ever since I've seen you make the first laminate.
And my favorite was the junebug/green pumpkin
its just random...doesnt swirl in a spiral
Well shoot I was hoping it would be an awesome swirl thanks for answering though
What kind of vacuum chamber and how do you use it?
That June bug/ watermelon blue laminate looks great.
The "slaunch sauce" makes for a decent air freshener in the car when I leave my rods in the car lol. Seriously though Googan baits catch fish, but rip insanely easy.
Creature, came out awsome
You was a drummer… I was… great consistency bro
I would love you try to find that heat stabilizer what is the name of it. Anyone know what heat stabilizer is good
I have just ordered my stuff to start my bait company I have a couple grub molds and a worm mold and wondering what the next step is.
Make baits lol
I love your videos and this one is no exception. Sometimes I find myself thinking, I would just like to fish the sprues. Like a cross between tube and paddle tail. Maybe a weighted swimbait hook? Maybe a trailer treble? Could be a fun video.
I will try it for sure
How do u get your baits not to smell ween u take them out the mold
"Expensive" bruh takes me a month to get a single pack up here in Canada XD always using a lighter to mend them to keep the same 3 packs rolling lol
flarexx.xx I felt this in my heart
bro where in canada do you use googan baits
Mack Langen there are smallmouth and largemouth in BC/Ontario/ Saskatchewan/ Manitoba/ Quebec
@@treydenfrench7009 Awesome, I live in Alberta :(
Bro I can hook you up Gi to a website called Bugmolds.com and there is a super cool bandito bug mold it litteraly is a exact remake of the bandito bug
The laminate punch bugs looks like the sprayed grass you've done
Man I’ve been wanting this!!!!
thanks for tuning in
World's Worst Fishing I’d love to see you do a Texas roach color especially in a craw
Have you ever taken versions of the ‘same’ color from different brands and did a re-melt? Like Zoom Junebug meted with Reaction Innovations Junebug. Could be interesting?
havent done that yet
That swimbait near the end was amazing.
Thanks sir
I’m fixing to start poring molds and do you have to use the air machine
its recommended but not a must have
Great vidd 💪
thnak you
where can I find the molds and injector
Hey man where do you get your metal molds
That’s a sweet idea
You don’t know how long I’ve looked for some of these colors
This is funny i just got a bandito bug mold its only a single but still awesome
8:00 “and then Jesus had Boba Fett turn them into frogs!”
The frog color he made looks great
Where did you get the 9" ribbon tail worm mold. Is that one an injector too. Or hand pour? I'm looking to just do the worm, 1 creature style and a smaller swimbait. What molds do you use?
Where do you get your soft plastics bags made or ordered? I would like to make some packaging for my plastics.
all the fancy printed bags are made in china..only place to get them really
Where do you get the head stabilizer?
Awesome video quick question how do you make them scented??
add scent oil to the bags when the baits are done
When he pulled out the sticks it made me happy to see another percussionist fisherman
Me three
The junebug and green pumpkin laminate is called Bama bug, cool color and super good during spawn and fall.
yeah it made a great bama bug
World's Worst Fishing sure did hope it works well for you👍
LFG is my second CZcamsr.... your my #1. haha!
hell yeah!
We're did you get the heat stabilizer
lureworks