How to replace rear windscreen washer jet on an Audi (Audi A3 8P) EASY!

Sdílet
Vložit
  • čas přidán 28. 08. 2019
  • Another quick how-to style video on diagnosing and replacing the rear windscreen wiper washer jet. I hop this is helpful for someone and please like and subscribe for more weekly content.
    link to part:www.ebay.co.uk/itm/Rear-Wiper...
  • Jak na to + styl

Komentáře • 43

  • @MarcNunn
    @MarcNunn Před rokem

    Another grateful viewer - saved me a trip to the garage. Didn't think it would be so easy.

  • @Carl_Thompson
    @Carl_Thompson Před 3 lety +4

    Thanks for posting - worked a treat on my SQ5 - didn't realise it was going to be quite so easy and saved a garage visit !

  • @MurrayC
    @MurrayC Před 4 lety +1

    Thanks OJ, sorted mine thanks to this video. I got away with taking the jet off and blowing it through with compressed air

  • @adeolu6408
    @adeolu6408 Před 2 lety

    perfect thank you. I cleaned the jet with a needle as needed to sort before long journey, magic. worked a treat. will order a spare jet for later

  • @wiganlad2006
    @wiganlad2006 Před 4 lety

    You legend. I have the same washer jet on my Skoda Octavia. Developed a leak in boot and the pipe had came out. I refitted it but still blocked. Didn't know how easy it was to remove the jet. Going order new jet for it now.

  • @jackyarrow9442
    @jackyarrow9442 Před 3 lety

    Really helpful video, just checked and mines the exact same! Thanks a lot.

  • @alex568756
    @alex568756 Před 4 lety +1

    Thank you, this video saved me time and money.

  • @peteedwards2852
    @peteedwards2852 Před 3 lety

    Nice one, saved me looking at all the piping. 👍

  • @MrEclecticity
    @MrEclecticity Před 3 lety

    Exactly what I was looking for. Thank you.

  • @ronniemay972
    @ronniemay972 Před 3 lety

    Nice one thank you. Jet was blocked tried to blow it with compressed air but couldn’t unblock. ordered new jet and works. Thanks

  • @stevestephenson3546
    @stevestephenson3546 Před 4 lety +1

    Thank you so much, sorted my washer for me.

  • @garethparker3355
    @garethparker3355 Před 4 lety

    Great video! Bought 2nd audi and the rear jet hadnt worked - watched your video and sorted the problem in 2minutes flat.

  • @AT-rs1oy
    @AT-rs1oy Před 3 lety

    Thanks very useful. Cleaned with a pin and working fine again👍👍😀

  • @lynxmk3
    @lynxmk3 Před 4 lety +1

    Hey thanks for the video mate, my q3's was totally blocked and this sorted it so thanks 👍

  • @markbaldwin579
    @markbaldwin579 Před 4 lety +5

    Thanks will sort that in the morning.

  • @jaystig3279
    @jaystig3279 Před 4 lety +1

    Helped me out big time

  • @beddy121
    @beddy121 Před 4 lety +1

    Thankyou worked for me

  • @kbollo123
    @kbollo123 Před 4 lety +1

    Thank you ..,,,, just did mine following your vid Cheers!!

  • @thechosenvv
    @thechosenvv Před 4 měsíci

    Thank you very much!

  • @GSTripleF
    @GSTripleF Před 3 lety

    Thanks OJ, just bought a used SQ5, supposedly having gone through 142/5 Used Audi checks.
    Car is awesome except for the rear wipers.
    Managed to unblock them using hot water. Your video was very helpful, thank you.
    Why Audi hadn’t done this 🤷‍♂️, beggars belief??

  • @lenep9985
    @lenep9985 Před 3 lety

    Thanks...that was useful

  • @blueally
    @blueally Před 3 lety

    Cheers, thanks for the help

  • @MichaelStephenson12
    @MichaelStephenson12 Před 3 lety

    Cheers for the tip, I was wondering why mine wasn't working, turns out the nozzles were blocked as well

  • @EastStandGG
    @EastStandGG Před 4 lety +1

    absolute hero

  • @andresn6525
    @andresn6525 Před 3 lety

    So I ordered the correct part and I'm wondering if it should "snap" in place for a snug fit; or does the wiper aen cap hold the nozzle in place securely.

  • @Butterflylo328
    @Butterflylo328 Před 2 lety

    Thanks!

  • @lukeswaby4971
    @lukeswaby4971 Před 3 lety

    Hi I removed my jet could get it back on properly is there a method I should be following?

  • @BABZ786
    @BABZ786 Před rokem

    Hi is this the same for audi a1 wiper works plus motor but no fluid coming out great video was looking for the jets above near spoiler couldnt find it after watching this vid realised its under wiper clip arm so is this same for audi a1 sportback ??

  • @Jasmineliketheflower
    @Jasmineliketheflower Před 2 lety

    Its not the jet on my car, i can hear the motor working but theres no water. what can i do then?

  • @daddycarp4596
    @daddycarp4596 Před 2 lety +1

    Where did you buy the replacement mate?

  • @Sunny-jw7kt
    @Sunny-jw7kt Před 2 lety

    What the name of the little part where do you buy it from

  • @ryangrogan4835
    @ryangrogan4835 Před 4 lety +1

    Thanks, this prompted me to to take a look as mine hasn't been working since I bought it and I put it off. I popped the cover off and there is no jet! There's no water being pumped out at all so can you tell me what might be the problem please?

    • @ojsannals6877
      @ojsannals6877  Před 4 lety +2

      This isn't me trying to be condescending or anything like that but let's start with the easiest thing, the washer fluid reservoir, does it have fluid in it? If yes, does the hole where the fluid comes out of look blocked? If no then maybe the hose could've loosened/disconnected behind the rear boot lid trim.This may help: www.audi-sport.net/xf/threads/no-wiper-fluid-out-of-the-rear-wiper.203643/
      I hope you can sort it out!

  • @alanhulme1987
    @alanhulme1987 Před 4 lety +1

    Thanks for the video mate, where can you buy the new jet from? I checked mine and its completely rusted up lol. Thanks in advance.

    • @ojsannals6877
      @ojsannals6877  Před 4 lety +1

      alan hulme I think this should be fine: rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F362606188816
      Please double check

  • @kinderjim1
    @kinderjim1 Před 2 lety

    I have a leak in the rear washer line and water comes out in the area of the door sill upper footwell on the drivers side RHD when the pump is run. Any ideas on how to fix as it seems that maybe connection in the line has happened because of a blocked rear jet,. Thanks for any help

  • @cocoablini
    @cocoablini Před 2 lety

    Easy. Thanks for vid. The design is dumb as hell. Water, calcium just sits and collects in the nozzle

  • @JonathanGardnerPotsMinistries

    Thanks!!!