AUDI A3 Rear Windscreen Washer Jet Nozzle (MK2 Sportback)
Vložit
- čas přidán 23. 07. 2024
- In this video I show you how I removed fixed and refit the rear windscreen washer jet nozzle on an Audi A3 MK2 which is similar to other VW/Audi/Seat/Skoda models
Rear Wiper Shroud: 8E9 955 205C amzn.to/3XygvI8
Washer jet Nozzle: 955 985 amzn.to/45zkjdX
Please Like this video:👍 • AUDI A3 Rear Windscree...
Please subscribe to this channel:👍 goo.gl/eubNMd
Please share this video:👍 • AUDI A3 Rear Windscree...
Buy Harvey a Coffee: ko-fi.com/hatboyharvey
I thank all you guys for watching 😎. Please let me know if this video helped you and what you think in the comments below and don't forget to like, share and subscribe for more escapades of HatBoyHarvey in the next video release,
(Oh and he’s the rabbit in the video if you’re wondering)
The content of this video is for information and entertainment value only and it's creator makes no claims, promise or guarantees of it's accuracy, coverage, instruction or adequacy of the procedures contained therein.
HatBoyHarvey assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
HatBoyHarvey recommends correct safety practices when working on motor vehicles, vehicle lifting tools, axle stands, hand tools, electrical equipment, chemical, products and consumable parts, lubricants or any other tools, equipment, chemical product and consumable parts, lubricants seen or implied in this video.
No information contained in this video shall create any expressed or implied warranty or guarantee of any kind of expected result including any injury, damage or loss that may result from improper use of the information contained in this video and the use of any tools, equipment, seen or described in this video and is the sole responsibility of the viewer and user and not the creator of this video and HatBoyHarvey.
Music: Race_car / Monks - Topher Mohr and Alex Elena /youtube_audiolibrary / also Audionautix is licensed under a Creative Commons Attribution license (httpscreativecommons.orglicensesby4.0) - Auta a dopravní prostředky
Thanks Harvey! I was able to follow your instructions perfectly to unblock and adjust my rear wiper nozzle. Works like a charm now!
Brilliant, thanks for sharing. 👍🏽 Simple enough to follow even for a putz like me. Can't wait for daylight to try this out!
Thank you so much! My q3 back washer stopped working years ago and I’ve finally sorted it out thanks to you.
Glad I could help, thanks :-)
Suggest leaving the washer jet in very hot water with a bit of vinegar for 30 minutes, or if you have one use an ultrasonic cleaner. This way you won't have to play with getting water nozzles re-directed and the cleaning should be better...
Great idea, thanks for sharing :-)
Vinegar and boiling water worked a treat, thank you.
What a helpful video. I can't wait to try it out on my car this weekend. Many thanks.
Cheers for this, this really helped. It turned out that my car's blockage was further down, so once the nozzle was off, I needed something long and thin to shove down the hole. I found that a stripped earth wire from a section of twin & earth cable was ideal since it's flexible, thin and solid.
Thanks for the tip 👍
Thanks for your video , just sorted mine out! Great
Very helpful. Thanks for posting. Was the same process for a 2016 A3 Sportback
It worked with my Audi a3 8p thanks a lot bro, great video. I just put some pressure can air through this little valve and it was bueno.
Great 👍
Had the same issue on my Octavia VRS and this fixed it right up! Many thanks!
Great to hear, you're welcome :-)
yo this was a life-saver! thanks a bunch ... saved me an expensive trip to the dealership!
Thank you mate!! The job on my list! 🤝🏻
Followed your instructions and job done. Thank you 😎👍
Awesome, thank you :-)
I’ll be trying this after work tonight 🍻🍻👍🏻
Thanks it’s worth watching
Wonderful. Thanks for making this video!
You're welcome, glad you enjoyed, hope it helped a little :-)
Really helpful, thank you very much.
Thanks. Worked a treat
You're welcome :-)
Fantastic video! Very useful, thank you for sharing 👍
Glad you enjoyed it, my pleasure :-)
Excellent video thank you.
Great video, thank you so much for this insight on the rear washer. I hope this fixes mine.
Thanks, glad to have helped :-)
Good video. I always boil a kettle and using scissors or pliers to hold the nozzle, pour boiling water into both ends of the nozzle, as washer cleaning additives can sometimes wax up. Get a mouthful of water & blow some through to ensure it's clear.
Thankyou explained clearly and in great detail
You're very welcome, glad it was helpful :-)
I have this problem with my VW touran but you solved my problem.. thanks for sharing..
You're welcome :-)
Great video
Fantastic video. Worked like a charm - even for a mechanical idiot like me. Thank-you so much
Thanks, very useful 👍
👍
Thanks a million
Great job
Thanks :-)
This worked great with my Honda 2600 psi Pressure washer czcams.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP , it came with two different size adapters, and tread tape so you're ready to go. I used it on my sidewalk that was getting dark and it worked great with no sprayer streaks. Just back and forth, really easy and way better than the spray adapters that came with my Pressure washer.
Excellent video, thanks for this.
It was exactly the same procedure to remove and clean the nozzle on my 2011 A1.
Works like new again now.
Glad it helped :-)
Now I can steal one for my car 😂
just done my rear washer jets on my 2010 audi a3 just like you did was blocked with muck and auto glym cream polish , its easy to do thanks to your great video it was great info m8 ,all the best ,take care
Thanks, you're welcome :-)
Thanks
You're welcome :-)
Hi , if you find any time make some videos about mk1 skoda fabia...nice job.
I’ve got a 2017 which is like this now, gonna try this in the morning, 90% sure it has been stood for a while so hopefully just corroded as I can’t see any leaks, I’ll be back to let you know how I get on!
Thanks for dropping by, hope you get on OK :-)
@@HatBoyHarvey I went to investigate, the nozzles are pretty corroded as you suggested so I cleaned them up, I made sure the water came out of the pipe to prove out the burst pipe theory thankfully it works, the only problem is someone has been there before me which I suspect was for a rear wiper delete (maybe) because the jets little round collar on the inside was broken, ordered a new jet from Autodoc part number 8V3955985 should anyone else need it 😊 thank you for the instructions and sorry it didn’t totally cure my issue this time
wifes audi Q2 needs the rear jets checked as not working, will try this first ta
You're welcome :-)
Hi, I have what I assume to be a wiring issue on my mk1 Fabia vrs. My reg bulbs flicker constantly, I have changed the units and new bulbs but still seems to be happening. I’ve tried to google but nothing seems to come up. I do have a video of it if that would help.
Alternator worn and not charging smoothly (should be over 14V) and/or bad battery (12.6V), also check neg earth to body on car :-)
@@HatBoyHarvey Thank you for the reply. This may be a stupid question but how do I check the negative earth to the body on the car?
If you have a volt meter you can test to see if you are getting the same voltage from the bat + terminal to the body and various other parts such as the engine. Do this with both the engine off and then on. Turn your lights on to see what is going on with the flickering. Take a pour lead off the bat and car body and clean up the contact points and refit, if lead is bad replace.
Really good video. Unfortunately the nozzle was in such bad state that I had to order a new one.
Thanks, sorry you had to get a new one, but it's great you were able to fix it yourself, right :-)
@HatBoyHarvey It was still fairly cheap so didn't mind, but yes, great to see some things can be done easily by a non mechanic.
Any tips with the previous A3 modell (8L) - water leaking into the trunk from over the rear left window.
I don't know, possibly there is a joint in the washer jet feed behind the C panel? :-)
Could be, seems like I need to tear the car down :) Thanks for the reply anyway!
Nice video but in my 2011 A3 the rear wiper fluid doesnt come out even when i removed the nozzle
I noticed the dripping underneath the car but it my first time doing this kind of work on the car. Any solutions? Or instructions thank you
you need to gain access behind the plastic wheel arch lining and trim where you will find the rear jet pipe connector that is easy to push back on. Turn the road wheels before doing this makes it much easier :-)
After you remove the plastic cover. Whats the black plastic bit called? Mine is missing and the washing fluid just runs down instead of spraying. New to find replacement.
I think you mean the washer jet nozzle. I've left links in the description :-)
Hey, may I ask, is your rear wiper motor kind of loud? Or is mine some kind of chinese copy which previous owner installed? It's pretty annoying
Thanks Harvey.
Did all this but still no joy on my A3 2009.
Problem may be that the nozzle is loose enough to come off when I take the plastic cover off.
Panther Pro tool goes in and out of holes fine, no rust build up.
Cleaned with wd40.
New nozzle required do you think?
Are you getting water to the jet at all? these are prone to the pipes blowing off under the wheel arch, check for this otherwise as you said a new nozzle :-)
@@HatBoyHarvey yes, I get plenty spurting out with it off. Motor sounds fine.
So new nozzle it is.
Don't know where to begin to search. Any pointers?
Thanks again
This shouldn't cost much at your local Audi dealer, worth a try as these will be much better quality than aftermarket ones. My experience with aftermarket front nozzel jet for fabia is they are very poor compared with OEM :-)
@@HatBoyHarvey thanks so much.
As it happens got spray out of 1 of the jets in the end. Enough to do the job for now.
Will order new Audi one.
Thanks again.
Keep up the good work.
Do you advise on other Audi car features? Air conditioning, etc?
Hello. I wonder that the motor was making sound when its stucked? Mine is not giving water neither make any washer motor sound. Do you think it is stucked or might be electirical problem
Hi, Sorry to hear your having problems with it. First check the fuse is OK if not replace if OK then check the motor pump under the wheel arch for power, first by listening with a friend activating the jet wash, if nothing then you will have to expose the pump by taking the bottom panel off and liner and bumper if necessary and test with a test lamp or multimeter. Hope this helps :-)
@@HatBoyHarvey thanks for reply. I ordered new washer pump. I will try to replace it.
Is it the same on the Fabia
very similar, but with 2 jets, but sadly not interchangeable :(
@@HatBoyHarvey thank you
I don't know how the hell you managed to remove the cover without breaking something. The mechanism on my A1 must be different, I cannot get it off or on without breaking something, it's impossible!
Sorry to hear that, you have to be very careful and gently ease each side off. Maybe try using some lube first like silcone spray or penetrating fluid :-) if it broke it may have been cracked before hand :-)
@@HatBoyHarvey I fixed the broken parts with super glue, so at least it works, but I'm going to order spare parts because I doubt the glue will last long
Would it not be a good idea to flush the line through while the nozzle is off?
Yes, that is exactly what to do :-)
@@HatBoyHarvey Thanks for the tutorial, I have a 14 A3 exactly the same washer however having cleaned out the nozzle I checked the washer with them off and the line was blocked. I hand turned a small drill and cleared out more much however ended up reverse flowing the tube with a tyre inflator with a toy inflator on the nozzle which blew back the line to the tank. Giving it a go then bought loads of bubbles up the line and then the water.
🫵🏻👍🏽
Bad design .
I think the jet could have been better!
@@HatBoyHarvey £16 for a new one from Audi lol !
@@heartwilson.8943 I know, terrible rip off, but genuine! ;-)
Sorted mine out but it's a bit off and shooting over the windscreen. Closest I'll ever be to Mr bond, James bond!!!
Great, just needs adjusting with a narrow pin :-)