@@BuildBreakFix I have been trying to accumulate parts to build an ms460. But I'll be doing all the work with a rotary tool! Lol! I remember seeing you throw yours away!
@@BuildBreakFix Check this out! I could not find any US Stock 2pcs OD 12mm ID 10mm length 250 304 Stainless Steel Capillary Tube! Instead I found US Stock 2pcs OD 12mm ID 11mm length 250mm 304 Stainless Steel Capillary Tube! 😂 Guess I got shave a mm of the edge!
Glad to see you’re back. Hey I’m building one of these right now and wondering what material you used to fill the original bolt holes? I’m thinking of using 6063 or 6061 aluminum bolts. Any suggestions thanks.
@@BuildBreakFix Ok good to know. By any chance did you machine the cylinder on this one to have the same bolt spacing as the case itself to use with the adapters? I saw in your guide videos you did that to the example. I was always under the idea that one would leave the cylinder alone (atleast when using a yd100 bottom) and fill in the case holes with bolts, cut it, level it and drill new 55x50 holes. I originally tried using stainless steel bolts but my press and bit would bend off of the steel and onto the aluminum case ruining the hole pattern. Thanks again.
@@BuildBreakFix try the super phantom menace 85 build middle cylinder is a chopped phantom 85 cylinder head and and the top piece head is a avenger 85/phantom 85 Racing performance head from go max ind and the piston smolik performance gives you don't use the stock phantom piston rings use caber piston rings 1.2mm x52mm hiway caber piston rings with the ZTmoto Reed valve setup that's what I am using two Windows hole piston best setup so far my engine refuses to die I think I fixed the problems that China couldn't fix lmao
hi, im going to build a 52mm saw build and was wondering if there was something i have to do with the timing? i saw in one of your videos that you said something about decreasing the timing by 6.5 or something like that
Hope you're feeling better brother! Nice to see you back on the bikes 👍🏾
Just been on vacation 😄. I'm doing great 😃👍. I love your KTM build omg 😜👍
Oh yeah welcome back brother
😜👍 was on vacation
Good stuff 👍
@@robertbermudez4458 😜👍
😊 awesome bike!
😜👍
That bike makes my adrenaline pump! Great ride!
It's a fun little bike! Was a fun build. Never used a BMX frame till this build
@@BuildBreakFix I have been trying to accumulate parts to build an ms460. But I'll be doing all the work with a rotary tool! Lol! I remember seeing you throw yours away!
Lol very doable with one! I was just being me 😆
@@BuildBreakFix Check this out! I could not find any US Stock 2pcs OD 12mm ID 10mm length 250 304 Stainless Steel Capillary Tube! Instead I found US Stock 2pcs OD 12mm ID 11mm length 250mm 304 Stainless Steel Capillary Tube! 😂 Guess I got shave a mm of the edge!
@@BuildBreakFix And that's why I agree with you so much! 😁
Bicycle look great. Congratulations bbf
Ty appreciate it 😜👍
That is a sick ride!! 🎉🎉
Ty 😊👍
Runs like a champ😎😎🚲💨💨
Ty Ty 😜👍
Awesome
😜👍
Nice 👍 interesting liscence plate lol
It's for my HOA 🤣
54mm , pipe & tuned carb must rip pretty good.....Wish I had a nice 27.5 or 29in BMX bike to throw an engine on.
Ty this build was fun to build. Loud as hell 😂
Glad to see you’re back. Hey I’m building one of these right now and wondering what material you used to fill the original bolt holes? I’m thinking of using 6063 or 6061 aluminum bolts. Any suggestions thanks.
I used stainless steel 8m to 6m thread adapters. Just used 6m bolts.
@@BuildBreakFix Ok good to know. By any chance did you machine the cylinder on this one to have the same bolt spacing as the case itself to use with the adapters? I saw in your guide videos you did that to the example. I was always under the idea that one would leave the cylinder alone (atleast when using a yd100 bottom) and fill in the case holes with bolts, cut it, level it and drill new 55x50 holes. I originally tried using stainless steel bolts but my press and bit would bend off of the steel and onto the aluminum case ruining the hole pattern. Thanks again.
Sounds like my super phantom menace 85
Speaking of which when you going to try the super phantom menace 85 build
You know. I considered making one next. But I'm torn over a ktm65 build also. Or a 212 predator with a turbo 😆
@@BuildBreakFix try the super phantom menace 85 build middle cylinder is a chopped phantom 85 cylinder head and and the top piece head is a avenger 85/phantom 85 Racing performance head from go max ind and the piston smolik performance gives you don't use the stock phantom piston rings use caber piston rings 1.2mm x52mm hiway caber piston rings with the ZTmoto Reed valve setup that's what I am using two Windows hole piston best setup so far my engine refuses to die I think I fixed the problems that China couldn't fix lmao
Hey Chinese I see you try to copy me lmao
You might have to get a tune pipe setup for the super phantom menace 85
Roudy and nasty gold 😊
Very loud 😆 138db. It's my HOA favorite bike I ride lol
🤣 everyone in those houses is like " we gave up our time share and spent 600k for this"
@jasonburque 😜👍
hi, im going to build a 52mm saw build and was wondering if there was something i have to do with the timing?
i saw in one of your videos that you said something about decreasing the timing by 6.5 or something like that
czcams.com/video/b1b0wk1fH3w/video.html
@@BuildBreakFix thank you
Super nice bike! Where did You get the Disc brakes for that bike? I am looking for some like that for my Curser! 👍
There are videos. They were custom made for that bike.
@@BuildBreakFix Thanks for the reply! 👍
@@BuildBreakFix Can you build me one?
@RonnieQualls-wy1lp sorry I just build ones for myself for the channel
@@BuildBreakFix Well do you have a diagram or video explaining how to build one I would love to know, I need one for my beach cruiser 212cc build...