Electric scooter || bird 3 || step by step || DIY || tutorial || brushless DC controller

Sdílet
Vložit
  • čas přidán 14. 01. 2024
  • =======================================
    Product links 👇👇👇
    =======================================
    1. Heat shrink : amzn.to/3tSFcm2
    2.torx bit set: amzn.to/3SkZb68
    3.7 point torx bit: amzn.to/47AYyd5
    4.wire cutter: amzn.to/3U3eMsE
    5. 22 gauge wire: amzn.to/4aXxmYT
    6. Gorilla glue gun: amzn.to/3u3oArL
    7.xt-90 connector: amzn.to/47w6ZXn
    8. 16 gauge wire: amzn.to/3vA3CkX
    9. Solder iron : amzn.to/421zVFh
    10.rosin core solder: amzn.to/3TW91wI
    11.cloth tape: amzn.to/3vzxGwR
    12. Gorilla tape: amzn.to/41XZt6q
    13. Latching push button: amzn.to/3HpFLXu
    14.drill bit set: amzn.to/3O3WsM3
    15. Step down converter: amzn.to/47Hq4Wl
    16. Brushless controller: amzn.to/4b07snm
    17.30 ohm resistor: amzn.to/3tKORex
    18. Socket set: amzn.to/47GKuPo
    19.hammer: amzn.to/3U3GdSW
    20. Flathead screwdriver: amzn.to/3NZ6uxN
    21. Heat gun : amzn.to/47Bmptd
    22.drill dewalt 20v: amzn.to/3O5bPDR
    23.WD-40: amzn.to/3Sj8Xpq
    24. Razor blades: amzn.to/3SjYxG8
    25. 10 piece alligator clip: amzn.to/3tP4aTz
    ==============================================================================
    Smashed that thumbs up 👍
    Don’t forget to subscribe !!

Komentáře • 54

  • @Evgeny-Sheri
    @Evgeny-Sheri Před 6 měsíci +8

    I'm ‏‪follow you from day 1 and can say you started from 0 and now you on pro level and it's so cool to see how you work like a pro. Respect dude 💪🏻😎

    • @pjscootermods
      @pjscootermods  Před 6 měsíci

      Thanks I said the same 😎

    • @n8dizzle157
      @n8dizzle157 Před 28 dny

      ​@pjscootermods can you post a link for exactly what to buy? I clicked 1 of your old links and it says parts unavailable now

  • @jamieestevez-rt7ge
    @jamieestevez-rt7ge Před 3 měsíci

    I have what I think is a bird zero and I'm trying to convert it a lot of the stuff on your videos is for other birds and I'm wondering do I have to get a new controller box throttle or a new motherboard display or motherboard? Can I just use original stuff that's already on the scooter other than being able to start it with a button obviously or do I need to buy and what do I need to buy

  • @TheAnthonyBrandi
    @TheAnthonyBrandi Před 6 měsíci

    You should keep the brake light switch. Nice work g.

  • @kuntz144
    @kuntz144 Před 5 měsíci +3

    First off thanks for the videos. Also why not heat shrink the resisters?

  • @TheRants
    @TheRants Před 2 měsíci

    The Brushless controller you linked on Amazon is out of stock, is there another alternative you can recommend? I was worried I'd get one that's a different size.

  • @brayalloneisunclebo1202
    @brayalloneisunclebo1202 Před 6 měsíci +4

    Hey good work figuring it all out 👍👍 at min 11:30 wen Yu open battery, I used voltmeter on B or P +/- to find 12volts constant ,solder on wires , and delete the step converter$,😮, LMK

    • @pjscootermods
      @pjscootermods  Před 6 měsíci +1

      lol yea u can do that to just be careful not to cause a short by exposed wire making contact with battery casing that’ll cause your BMS to lock up and have an error code. If that happens, then you would have to do a BMS reset.its works ! Try it just add you some on/off switch’s

    • @TheAnthonyBrandi
      @TheAnthonyBrandi Před 6 měsíci +1

      This will cause a battery imbalance with certain cells and cause your range to lower because the bms is passive not active so you loose capacity.

    • @MicheleBrussino-jl2ys
      @MicheleBrussino-jl2ys Před 4 měsíci +1

      Hello whe i have bypass the bms i have make a short circuito but with voltmeter give me 36 volt how i see if the bms Lock

    • @brayalloneisunclebo1202
      @brayalloneisunclebo1202 Před 4 měsíci

      @@MicheleBrussino-jl2ys if you connect battery like @pjscootermods does and it don't have power use your multimeter to find where power stops at, I think PCB way, has a BMS board for this style battery im still looking👀

  • @austino356
    @austino356 Před měsícem

    Will it still charge normally?

  • @n8dizzle157
    @n8dizzle157 Před měsícem

    Just wondering do I have to buy a new control unit or can I use the original control unit?

    • @n8dizzle157
      @n8dizzle157 Před 28 dny

      Hello? Do you not do videos anymore?

  • @damienboyer3629
    @damienboyer3629 Před 16 dny

    Is this working on Bird One 9 ?

  • @dorhocyn3
    @dorhocyn3 Před 6 měsíci +2

    This is great stuff, so where are all the cheap or free (legal) birds at?

    • @Evgeny-Sheri
      @Evgeny-Sheri Před 6 měsíci +2

      Depends on where you are from... Different countries different rules you know...

    • @pjscootermods
      @pjscootermods  Před 6 měsíci +4

      Normally, in a river underwater , people throw them in the ponds , lakes and that’s where they remain until they get buried under dirt and later get found by magnet fishing or divers.

  • @pietraop2975
    @pietraop2975 Před 3 měsíci

    can you attach a 3 speed switch to this controller? And how do you turn off the system without an lcd screen

    • @pjscootermods
      @pjscootermods  Před 2 měsíci +2

      Is the controller you are using supports three speed then, yes, we can absolutely connect a switch to it . And depending if you have a controller with a display kit already you can power your scooter on and off up top through the display. it has a on and off button , and a few other buttons to make adjustments.. if you are just buying a controller by itself, then you would need to add a kill switch to kill all power.

  • @citpelocitycit7663
    @citpelocitycit7663 Před 6 měsíci

    nice what is max speed? i need a 20 km/H controller , can you recommend one?=

  • @dannys4831
    @dannys4831 Před 6 měsíci

    Can you do a video on e-bike like wheel etc

    • @pjscootermods
      @pjscootermods  Před 6 měsíci

      They took the fleet of wheels off the streets, no more wheels e-bikes in my area broski

  • @almadawarriors
    @almadawarriors Před 6 měsíci +1

    Hello! I just mounted the 350w controller but the speed is too low, what can I do to have more speed???

    • @viktorravnjak4208
      @viktorravnjak4208 Před 6 měsíci

      did you figure it out?
      i have the same problem

    • @almadawarriors
      @almadawarriors Před 5 měsíci

      @@viktorravnjak4208
      Yes !

    • @huflepuf3441
      @huflepuf3441 Před 4 měsíci

      How fast is it with the 350w controller

    • @viktorravnjak4208
      @viktorravnjak4208 Před 4 měsíci

      @@huflepuf3441 i figured it out, with the 350w controler the scooter goes 25kmh

  • @mygodisawesome7810
    @mygodisawesome7810 Před měsícem

    I’m in Cleveland, but I get a jump on here in Cleveland

  • @lulcito
    @lulcito Před 2 měsíci

    Does this work on lime scooters

  • @Skrek1988
    @Skrek1988 Před měsícem

    the thick red u call key on controller isnt that main positive and the thinner red one is the keyswitch

  • @pietraop2975
    @pietraop2975 Před 3 měsíci +1

    what happens if u get catched with this?

    • @pjscootermods
      @pjscootermods  Před 2 měsíci

      Nothing will happen. Assuming it’s legally obtained .

  • @pietraop2975
    @pietraop2975 Před 3 měsíci +1

    is the guide also for bird 2?

  • @Felix18769
    @Felix18769 Před 6 měsíci +1

    Where did you get the scooter from

    • @urnville
      @urnville Před 6 měsíci +3

      street

    • @Felix18769
      @Felix18769 Před 6 měsíci +2

      Yes,
      Probably stolen

    • @Evgeny-Sheri
      @Evgeny-Sheri Před 6 měsíci

      You talk nonsense and accuse him of theft.
      If you don't know don't talk or accuse people of stealing. First check, ask people, then blame if necessary. Here you are wrong and I suggest you apologize or delete your comment. @@Felix18769

    • @urnville
      @urnville Před 6 měsíci

      no one casres about them really
      @@Felix18769

    • @brayalloneisunclebo1202
      @brayalloneisunclebo1202 Před 4 měsíci +2

      He explains where we get the scooters, please Google it, decommission scooters from multiple city,(danger to city, blah blah) but they still auctioned them off for low dollar in there cities 🤣😂

  • @justintrentini8956
    @justintrentini8956 Před 2 měsíci

    I have error code E 10 on my lcd display

  • @remussebastianmadmax5816
    @remussebastianmadmax5816 Před 6 měsíci

    novice ....😂😂😂😂 schimbator de piese, eu porneam controleru original ..ce e asa greu, am facut nustiu cate...scot gps-ul, trebuie sa sti care sunt firele de pornire, etc

  • @remussebastianmadmax5816
    @remussebastianmadmax5816 Před 6 měsíci

    you do noting broo, Romana ,,.. de ce nu ai lasat controlleru original , pentru ca tu nu te pricepi la electronica decat sa schimbi niste piese amarate care sunt noi, da nu ai reparat sau modificat absolut nimica, zero 😂😂😂😂😂