Video není dostupné.
Omlouváme se.
Soldering Flux Paste Home made/Pinoy Diy
Vložit
- čas přidán 20. 09. 2020
- Pls.. Subscribe....
This is a simple soldering flux paste made at home.
its hard to soldering without a paste thats why. making Diy flux using a basic home materials
candle
cooking oil
If you Like My Content
You can Consider Donating in my** Paypal Account**👇👇👇
Link Below
www.paypal.me/...
Thank for watching
Bless you all..
for helping me🙏🙏🙏
Pls. "Don't forget Share like and
Subscribe😂😂😂😃😃😃😃😂😂😂😂😂😂😂😂😃😃😃😃😃😇😇😇😇
Guitar to Stereo ..watch👇👇👇👇👇👇👇👇👇👇
• Guitar To Stereo Ampli...
Diy Guitar Pedal For Pc
👇👇👇👇👇😊😊😊
• Midi Arduino Foot Peda...
Diy Steerinh Wheels👇👇👇👇👇👇👇👇👇👇👍
• Euro Truck Simulator C...
My fb Group👇👇👇👇👇💛
www.facebook.c...
Thanks a lot ! Was searching on how to use it and was wondering where to find it then boom ! Your video showed up !
❤
Soldering technique: Clean the Tip : small container of flux, dip soldering tip in flux, and wipe on small wet sponge. This makes a shiny tip, without contamination. Melt small drop of solder on tip. This drop of melted solder transfers heat to the item you're soldering. (If possible the tip below the work.) This heat prepares the components to receive the solder. Solder carries the contaminates away from the work. You might use much more solder than you thought necessary. -But at this price, who cares! Use a magnifying glass to inspect your work. Use alcohol to clean the area around the joint. This makes faster, cleaner joints which approach commercial quality. - (We used to say: Quality, Quality, Quality, in the voice of W.C. Fields)
Nice po gumanasa thank you sa tutorial nyo po❤❤
I will try that, thanks for the video.
The best way to make liquid flux is rosin and 99% ISP alcohol
Maganda siya nung triny ko. Kumakapit talaga sa components. Di na aq bibili 🥰
I just use pure parrafin wax, but first I boil of the most volatile part to reduce the smoking
Thank you. this will save me time and cash too.
Me also
@@YT-GAMER-X right on brother!
Thanks a lot for the idea you shared and I hope it will work for me.
You can try the alcohol and ensence much better. Watch my video on how to make🥰
Try petroleum jelly instead of the candle even though they are both petroleum based the need to heat is eliminated pls try love to hear your opinion tks for the video.....
thx
thanks Mr Pinoy..Good flux
Nice sounds from the roosters, Can you film your farm and the animals and upload it.
Lol
Lol but yes, I'd love that as well
roosters are assholes
thats a fighting cock , them chickens kill each other while they bet money
I second this
Thank you🎉
Thanks for sharing..working sa projeck ko..❤
Thanks for this video it was very helpful but one tip for soldering
Always have your iron at the bottom of your wire and add the solder at the top of the wire so the solder melts into the wire
You never wanna touch the solder to the iron and spread or drip it on the wires the solder doesn’t penetrate and it makes for a poor connection
Same to you sir thank you..
PINOY DIY ELECTRONIC Your Welcome!
Not true. Just slap flux on your wire melt a little solder onto tip of soldering iron and it will "flash" right into the wire, making a perfect, clean solder joint WITHOUT melting the insulation of the wire near the joint. Try it, you will see it works great ive been doing it this way successfully for years.
@@pinoydiy8384 sir konsa oil rakhna ha pls reply
I solder on a flat surface like a pc motherboard no top or bottom it comes out good
i have not try it yet but its simple and pretty nice
Yeh its working you should try..😁😁
What you made isn't flux
Flux is a mildly acidic mixture that dissolves the top oxidised layer on metal, revealing the pure metal layer underneath.
Wax and cooking oil have no acidic properties
The cheapest alternatives to store bought flux is diluted HCL or even ferric chloride. But good luck cleaning that stuff off the PCB after soldering. This is why good flux solidifies after use. It prevents further oxidation.
the right candle (not wax and not paraffin candle) have some grease acids (steramina) it is sell in bars for the plumbers.
that's what I'm worried about this video tip. I'm not an expert and doesn't know what particular component of flux is responsible for solder lead to bind faster. at 3:15, notice how clean the stick he used to dip on his home made hoax I mean flux. then when he apply the paste, it's dirtier than the one got dipped (possible a 2nd stick with genuine flux). but I do hope this actually work and not just another random hoax video that people will ask if it's real or fake.
You're right!
nice video boss
Good job nice thank you
you can also use yellow part of incent add to petrolum jelly.
kuya sunog na po sinaing nio hehe.
Try ko to idol thank you very much idol
Will probably try it out. Thanks in advance
galing talaga gawa din ako lods
Great !!! Easy and cheap !!! Thanks for you help !!!
Very very nice video sir thanks sir
Nice job it works
Thank you for make it easier making flux.
niceone aydol
Thanks 😊😊😊😊😊😊
Oil increases d surface area 4 transfer of heat thus ensuring even spread of heating, surface tension of solder is minimized & soldering is effective
Thankyou, It works !!
Nice video👍👍👍
Thanks for the thumbs up 👍.
Thanks
Can I use vegetable oil or virgin olive oil?
Meron namng flux yang solder lead mo eh fluxcored yan kahit wala yang candle wax
Thank you it works🙂🙂
Very nice
Kami dati gamit pa namin insenso kaya pati mga bad spirits umaalis 😂😂
May I ask which thrifts store locations you’ve had the most success at finding all these high end items? I live in Winnipeg to but I’ve never even came close to finding anything like this at the ones I go to. I’d cry finding a Burberry scarf lmfao been hunting for one I can afford for years now 😅
Super🌠 it works thank you very much bro
THANKS👍🏻👌🏻
Great work
Oxidized layer can easily b scrapped off instead of using expensive corrosive acid prior to fusing
now i know.nice thanks👍
Wow
Please note you should use stearic acid instead of vegetable oil, add rosin/resin dissolved in IPA for better results and obtain a paste very similar to famous brand flux pastes you watch in electronic videos. Try and send me greetings.
Yes i have my video thanks and regard for more info..this is fo experiment base on but not good enough..i think the rosin its good for soldering..
Dekhenge try kr k ...
I wonder how the ratio between candle wax and vegetable oil affects the performance of the flux, Ether way the stuff I mucked up did the job when I could not find my old flux tin. From what I have read the acid in candle wax is what is doing the work of removing oxide while the wax itself makes the oil which carries the heat a gel, Which can be applied to components easier than a straight liquid. This suggests that to improve this homemade flux, Find some kind of acid which is soluble in the oil & wax mixture.
Thanks im sri lanka
For wire lang to sir?
This DOES NOT clean oxidation and is (maybe) kind of useful with very clean copper. 😎
good job thank yu..
Nice bro
Bro I have subscribed you
Sir jo appne cooking oil lia bo sirf colour ke lia ya fir bo use me ata hani
Hellow ,di po kaya ma sunod ung board sa mantika?
I love you.. dear indonesia
Yessssss
Question if we can solder silver or gold with that type of flux plz?
use normal electronic flux
Nice
Palm oil? Olive oil vegetable oil
Palm oil sir....
Can i use coconut oil???
As a flux? No you cannot
To replace the cooking oil Maybe idk that’s a good question but it’s used for cooking so probably yess
Ha
Naic good video
Can i use mustard oil ?
Coconut oil use ??
Eyyy kababayan haha
Edit: luto na yung sinaing
Its work only for a coper wire not for pcb..but thank for sharing..
Yes, you are right
maganda ring gamitin ang ensenso
Brilliant
Hi !
Can i use bee wax ?
No sir
But which oil he used???
Can this work for desoldering, because i need to desoldering some nice components from some old circuit boards,?
You can watch my new video ..link hr
czcams.com/video/gNDFoy--eIk/video.htmlsi=aaWwWiZQk1RATv5G
Is it work
Can I use Vicks as flux
Mag kaiba ba ang flux at soldiering paste
Same sir ..mas sure lang na madali syang dumikit yung lead..
You forgot to add the aspirins.....(acids)
Bro but candles are isolator ,so it doesn't make an isolator surface?
im not pro at this. but, i think the solder wire that make it become conductor
Regular flux is an insulator when solid
The flux that tou poured in the plastic container was liquidy but the flux that you used for soldering wasn't liquidy . How is that possible
After a minute the liquid form like a wax. Did u see that the flux not a liquid.. Later i will make a video liquid paste..
of course it will harden when it cools. 😆
Thanks bro 😘😘
Use pine tar and isopropyl alcohol in the same manner. Melt the tar and add the alcohol while the tar is liquid. Be careful to not burn it all by using a large pan where the fire does not gets to the fumes.
Pine gum dissolve in isopropyl alcohol. No need to melt it.
Alcohol is flammable material, too dangerous, don't try
Super Bro 😘🥰🤗
Bhai refiend oil use Kar sakte hai kya please reply
Melt some rosin with it so that is works better
Candles aur Tel se jo flux banaya hai vah bahut tight Ho Gaya use kaise karen
Watch and experiment
pwde po ito para sa metal plate? kagaya pagdugtong dugtong yung mga batteries gamit yung manipis na metal sheet. pwde pa po ito? kung hindi sana may video ikaw... nag search ako sa youtube gagamit daw ng zinc anode sa sira na eveready battery at e salin sa muriatic... eh kaso yung mga battery ko d2 puro rechargeable... mayroon sira na hindi na kumagana isang nickel cadium... yung sa akin takot ako baka sasabog hahaha... any advice or video po flux para sa metal plate. salamat.
No sir watch moyung isang video ko using acid mas ok yun ..
Pwede po ba to gamitin pang solder sa pcb?
triệu like
Super it works
Can i use pine tar instead of flux?
turn pine resin into rosin and then dilute it in isopropyl alcohol to make flux
Great work!
Salamat
Welcome
It doesnt work for me 😢
Sad ❤🥺
I bet He's using flux core solder
Kitne din tak rah sakta he ye flux, expiry date?🙄
Ano ung Plactic..
May I ask which locations you find these great pieces at? I live in Winnipeg to but never can I ever luck out like this at the ones I go to. I’d cry finding this lmfao been hunting for one I can afford for years now 😅
Mayroon namng flux and soldering wire.
The way it slap right on im doing this!!!!
Hello sir, pwede ba yan sa tube na maninipis??like yung tube sa pang kurtina?
Really?? It work??
Try it
why didn't work when I tried the candle and cooking oil.
I have a question what type of candle should be paired with cooking oil??
Just clean first the tip soldering ...make sure that oil morethan candle coconut oil is ok...
@@pinoydiy8384 useless, it ruins solder tip and doesn't work, it doesn't have rosin how the hell do you think it'll work? It corrodes many components also. Stop making such time wasting videos