Hikvision Alarm Output Configuration on Acusence HVR / DVR / NVR + Alarm Input (Part 2)
Vložit
- čas přidán 30. 03. 2023
- Hikvision Acusense Alarm Output + Hikvision Alarm Input.
CCTV Alarm Output
CCTV Alarm Input
Acusense Alarm Output
(Video Part 1) Link ⬇️
• Hikvision Alarm Input ...
Facebook Link ⬇️
/ paulcctvsystemsuk
@PaulCCTVSystemsUK
@CCTVSystemsUK
Excellent informaiton explaining how these alarm in/out pin works on HiKvison DVRs. Thanks you Paul. Cannot wait to see Part 3!
were is part 3 ?????????
an excellent presentation, clear for non-native English speakers
Very very complete description
Clear and clean 🎉
Hi Paul, I can't find part three of the alarm out put (flood light)
Was it made?
Thank you, Leigh
21:20 To be a bit fair, even Sonoff, on their own website, describe their Sonoff MINIR2 as having *DRY CONTACTS* which "support to [sic] connect dry contact sensors and various types of external switches, such as SPDT switches and NC/NO push button switches."
I WISH I HAD WATCHED YOUR VIDEOS EARLIER! :(
Excellent video !!!!
It's any way that I can program the time of the Siren ?
Just a quick question when the camera/alarm detects motion is there a way to have a internal chime like ring with hikvision maybe link a ezviz chime to dvr not sure if this is possible
Hi,
Good question 🤔
The honest is I have never tried to be perfectly honest, but it may be possible if, say, your chime was controlled or activated with the 'eWeLink' app.
There is a way to use the email facility of the Hikvision device to activate devices that use sanoff relays / switches.
I personally don't have anything to do with Ring products as I find them a little bit basic. So, my advice would be to dig deep into the control mechanisms of the chime you want to activate and try to match the protocols to achieve your goal.
Good luck 👍
Regards,
Paul
CCTV Systems UK
Hey mate. Cracking videos, loads of info - did you ever do part 3? Thanks mate
Any reason why once triggered camera's won't reset themselves, i need to go into app and turn off and turn back on.
My day is NOT fantastic because CZcams recommended some other video before this one :(
What is the model of this dvr?
Can this be set so when the camera detects human it triggers alarm output?
Hi Scott,
Yes, it can. I usually set them for human and vehicle recognition, which activates the alarm output that triggers a 12v to 240v relay to activate outdoor security lights.
Hope this helps.
Regards,
Paul
CCTV Systems UK
@CCTVSystemUK
@@CCTVSystemsUK brilliant i was thinking of shed alarm and connecting a 12v siren and having a camera inside with human detection to reduce false alarms.
Either that or a masterblaster siren 😂😂 they wouldnt be returning afterwards
Thanks very much I've just setup my dvr with a master blaster using this method, works a treat, am very interested in the outdoor lights you mentioned look forward to that video
@@CCTVSystemsUK Hi, amazing system. What about turn off light when no motion after that ? It can be turn off after a time ?