Toyota crank no start FIX
Vložit
- čas přidán 14. 10. 2019
- ** Want to use the same tools im using on this video ?? click on the amazon link below*
Automotive Test Light- amzn.to/3IyMoH6
Kiwi Needle Nose Pliers- amzn.to/3O0d2cE
Alligator Extension Leads- amzn.to/3OZ90Tp
Hope y’all enjoy this video where I tackle this Toyota Sienna with a no start condition. Let see what we have on today’s video
Disclaimer:
Due to factors beyond the control of Oz Mechanics, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Oz Mechanics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Oz Mechanics recommends safe privatice when working with any tools or equipment seen or implied in this video. Due to factors beyond the control of Oz Mechanics, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained - Auta a dopravní prostředky
**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use**
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
Yes Top notch work sir, I need you here in Brooklyn, Sienna starts with crank , check engine lite on, check all fuses good, found rat poop on top of motor casing/compartment, I suspect maybe a cable was bitten? 🤦♂️😂
You finding the blown fuse made you a good mechanic. But you troubleshooting the CAUSES of the BLOWN FUSE.... Made you a Master Technician!! What a guy....
Wow! As a customer I was so impressed to see you did not give the car back after changing the fuse. So many would to move on to the next car. Your extra efforts in finding the cause of the blown fuse speaks volumes about your character. I personally feel better that my wife and daughter will not break down after the car is serviced! Keep up the great work!
Great Diagnosis. I know techs with years of experience that would have had trouble figuring this out. Good job.
Bravo. The comments about you are 100% correct. Your use of tools i never saw before (pulsar), your explanations and your use of digital technology and diagrams all in one video ... it was awesome! Many thanks for your video. It teach us about all what we can ask to mechanics to search for in our cars, so maybe, they will not see us so ignorant about car problems.
Thanks for the kind words Kil. Yea, this is my profession and I love what I do. I love to show how the diagnostics process is performed. And again thanks for stopping by
@@OzMechanicswhat if you change the coil pack connectors could be wires?😊 0:11
Well done. It was good that the customer at least mentioned what they did, prior. Communication works
Awesome job. Logical thinking and use of basic tools. Really liked this one. Many a tech would have just replaced the fuse.
And not solved the root of the problem ..many a hack you mean..
Man, I really luv how detail your vids are, really appreciate it. Every time I come across your vids I know for a fact I'm about to learn some something. Thanks Dude!!
Who ever have this video a thumbs down must be for something like dirty hands. Because the content and video was great.
Great Diag Oz! Definitely important to find out why the fuse blew! Thanks for sharing with us!
Very thorough diagnostics and an awesome mechanic.
Thank you very much
Great diag. Too many techs just replace a blown fuse without questioning why it blew. Thanks for sharing! 👍
You have a great feel for electrical systems, thanks for the vids.
Thank you Oz. Good job. I appreciate your videos. Have a blessed and safe week.
Thanks alot for sharing. Been having the same issue with my Camry 1999. Very embarrassing when it doesn't starts in the morning randomly. Reapect from Nigeria 🇳🇬
Great find OZ! Way to work it through man!!👍🏾👍🏾
I wish they made the pulsar still. Great video!
"Bam" I like it. Great detective work.
Nice find oz! I like that you included customer information that was helpful in the diagnosis. Too many times we get no background information!
Your video is a test case for a true knowledge transfer!
Great Job!
Having this problem right now.
AWESOME 👍🏽. This was my same EXACT problem. Thanks again for your help
No problem. Glad this video helped out
Thanks for all your help. Congratulations on your engagement all the blessings and love to you and the future Mrs. Oz💍 🎊🍾🎉 f🙇🏽♀️🙌🏼💯💞
Your the best dude am have this issue where my 91 toyota corolla starts and start loosing power shuts off at times as if theres a bad ground somewhere you just solve my problem
great job with good thinking miss your videos
great work and good on you for doing it properly / well done
My 94 Celica was having the same problem. Great video and information! I bought both O2 senors and my car is running like new. You have a new sub!
Thanks for the video did learn something and what to look for.
Good stuff!
brada its so ez 2 replace a blown fuse😂
but wut u did wuz moa den jis a mechanic u went above n beyond 2 find da cauz or issue y dat fuse wuz blown😳
very eduacational😎
awsum job wel done
💯🤙🏾✨👊🏾👌🏾💣💪🏾
Great job Oz
Thanks for the video. I have this same problem and need to get under the car and check the O2 sensors for shorts. Mine only blows the fuse while moving forward and tapping the gas pedal. Seems to be just when lurching forward slightly. Sitting still it runs and revs no problem. Reverse seems to be no problem either.
Nice work OZ. 👍🍻😎
Wow great job diagnosing.
great explanation and thanks for sharing it.
Very awesome video brother!
impressed with your thourough search for the underlying problem
Thanks for watching Joe
Professional diagnosed with pulsar perfect job⭐⭐⭐⭐⭐👍🕺💪💐💐
Yo OZ that was good, congrats on the fix and on the 💍 engagement Homie 🙌🏼
Homie Hektor thanks hector
2 real mechanical G's right here 💪
Good video Oz! I’d love to get my hands on one of those pulsars!
I found the one I have on letgo. They shipped it from Virginia
that makes two of us lol someone needs to start making these again.
Such a great tool. I dont understand why they stopped making them. I gave up trying to find one and ended up buying a PP Hook to do a similar job.
BTW great video Oz. Fuses usually blow for a reason
Great video!
Nice diagnoses and repair
Great video man!!
very good mechanic
Great advice thanks
Your the best sir all of my respect to you
Very good video thanks man realy apricots you
Man,Oz customers can be really sad at times. He didn't want to have the sensor replace. With that kinda of oil leak that they have under that car. We should have known better to ask. Thanks for the video still
Thanks for the informative video!
Quick question, when you were testing the fuses with the light, where exactly did you place the metal tip on? Because there's no part of the metal exposed, is there? Thanks in advance!
Big thump's up my man
Fantastic teacher thank you
Thank you for stopping by Kamal. Glad you enjoyed the video
Nicely found 👍👍
You got my car fixed, after 4 other utube mechanics.
Very nice dr Oz. Regards.
thanks it helped me a lot
Hello . Thanks for the great videos and recommendations . I have a 2008 XLE sienna with 170k miles that needs a front wheel Bearing, front sway links and rear shocks and 4 wheel alignment. Total of $1000. You think it’s worth fixing . Everything else with the vehicle is in great shape . Owned the car since new … thanks
Was that a universal O2 sensor? It seemed a bit long as the end was practically touching the cross member, which in turn would tend to stress the wires over time.
Love your videos thanks for sharing keep em coming
I have a question hope you might be able to help or if someone else does I’m open to hear what you have to say. 2000 dodge diesel 4x4 automatic idles high putting it in reverse or in drive dies under a load in tow. I was told possibly torque converter but I’m not sold on that just yet. Any trouble shooters have any idea??
Very objective, rational...
*Thank you*
Nice bro I have a Toyota sequoia 2001 crank but no star you same me money maybe the fuse blow plus I don’t see the check engine light in the dash
hi Oz, can you point me where you get the schematic for the circuit? I'm trying to locate a short on my 2001 Sienna with the EFI fuse keep blowing. Thanks. I've checked the Oxygen sensor, ECM. I got weird readings on the MAF sensors but can't locate where the shorts are coming from.
Thanks🙋
Great video. Any idea why my Toyota Tacoma 2008 cranks sometimes runs for 1 second and shuts off. I have to let it rest for 10 minutes otherwise same issue. To speedup the process , I go to the back of vehicle , step on the rear bumper up and down a few times ( to shake the vehicle) and sometimes it fixes the issue! It may run fine for weeks and same issue again? Any ideas why? Thank you
I have same exact car as in the video except a 98. My fuse blew out while I was driving. I was able to coast into a drive way of a gas station. While I was trying to get it running again I found your video. And was able to replace the fuse and get home which was a 45 min drive from where I broke down . The next day I test drove it for another 2 hours and still fine. Should I still check for wire shortages? Prior to the fuse blowing out I hadn't messed with it or cleaned anything under the car like the owner in your video. The fuse looked like it may have been the original.. I have owned the car 3 years and never had this issue before. . I'm just wondering if I should check for any electric shortages or just drive and see if it does it again ?? I'm just freaking out over it happening again while driving lol
Nice work Oz. I need to grab one of those pulsars, it sure comes in handy
Cody, I have been looking where do you get one
Arthur Fricchione look on eBay buddy. Found one the other day on there
@@codysautodiagnosticsprogra8706 thanks Cody
Right on man. We'll done..
I have a Toyota RAV4 2000, it hasn’t been starting lately. It will take like 20 Times to even get it to start finally if it does start. I got it checked and the guy told me he needs to replace a wire in the computer system? Quoted me around $250 to fix. Curious if it’s a blown fuse, or is that connected with the wire too? I did have a check engine light on for “evap” but they cleared it and it hasn’t come back on just yet.
But I need my car, any ideas ? It’s been a bit chilly in the morning but only around 63 degrees (Southern California), so not even cold enough to interfere with a no start? Any help or insight is appreciated!! Thank you!
What did the bad fuse control?
Hello I have a 1983 toyota corolla 1.6 engine that just started doing this crank no start thing .
Ive checked power to the distributor 12 volts , even while cranking .
Ive checked spark on all 4 plugs and they fire in order.
180 psi on all 4 cylinders.
Its getting fuel " fire " compression .
Thing is it will only start after i go through this bump starting process . Bump start with the ignition switch and release Immediately .
After doing this many times it will eventually start and run .
Vehicle it a manual transmission and if I try to roll start " its a hit or miss that it will actually fire up .
All fuses " relays " check out to be good .
After I once get it started it can be driven anywhere ( all day no problem ) .
When it first starts and runs for a minute or two I can turn it off and it will start right back up"
BUT if I continue to turn the ignition key switch to start position and hold it only cranks over .
Then again I can just bump the key starter switch and it will fire right up .
It has me stumped and doesn't make any sense .
NOTE " this problem just suddenly came about , the vehicle never has done this before.
Any help would be greatly appreciated !
Thanks
Thanks for watching Khen
what year toytota ? my 2000 solara shows the efi as a bigger fuse...I think
I do food delivery and after many stops and start sometimes the car will not start-no crank (I have a 2000 Corolla 1.8 CE) I also have check engine light on, I must have a jump to start the car, I noticed this happens after I shut down the car a few times and start again, I have to keep my car on and not shut it off or it will not start during my deliveries.
I have changed the alternator, battery and tested both are good and it continues with the issues, I think it’s something overheating.
The car starts only if I jump it or let it cool down for a while.
Any idea what it can be
Oz, good video nice troubleshooting. Could you just repair the wire or is it better to change the sensor? Just looking for the right thing to do. Thank you. What was the tool called? 👍👍👍
Arthur Fricchione I would prefer replacing the sensor. But Customer declines so I taped the wires.
@@OzMechanics I also would have replaced the sensor. 👍
Just subscribed very informative keep it up I have a question I'm having problems with my 94 Toyota no spark i replaced the coil and still nothing could it be the crankshaft sensor or distributor? Or ignitor? Running out of options I've replaced a lot of parts these couple days
What part of town are you in ? I have a lot of friends around the USA that might help you diagnose it and pinpoint the issue. Have to do proper test to verify if it’s a wire issue, computer or sensor
@@OzMechanics you know anyone around Knoxville TN?
Great insites bro I just swap an engine from one to another same trouble an it won't start with the key
I changed Engine Coolant Temperature sensor out, and now my 2002 sienna doesn’t want to start. Any Ideas? No crank, just a click.
My truck is a 1995 Toyota T100 it's keeps blowing EFI fuse. when I get on the freeway or at high speeds...Yesterday I seen wires hanging by bank 2....Wiring did not looked burnt bet it's the sensor too...Thanks
MY WIFE TAKING KID TO SCHOOL A HOUR AGO THE MAINTENANCE LIGHT STARTED BLINKING VEHICLE STARTED HESITATING PUTTING IT DIED OUT, SHE TRIED TO START IT, NO CRANKING SOUND NOTHING, I HAVE TO WALK 4 MILES TO PUSH IT OF THE ROAD BEFORE IT GETS TOWED, DO YOU THINK ITS THE ALTERNATOR, OR GOT ANY IDEAS.
Your hired!!!
Meeeeeeee. Hired ??
I have a 2010 Toyota Innova D4D here in India, in monsoon it doesn't start after going about 100 Kms and when we stop for a while. Gave it to the dealer, they said they looked over the fuel pump, the tank etc. Please can you help? 🙏
Have that Sienna)
If someone has to unhook the battery to a 2012 Toyota Corolla how can you run through the computer to get the codes
I have 2005 3.3l v6 camry se that is have problems. It die off one day on the road. It cranks up and turn on but dies right away. Can anyone help figure out the cause. I already change fuel pump and fuel filter. I also did spark plugs and i also did air filer with cleaning the throttle body. Im lost in what cause this. It doesn't pop up any codes
exact same thing happened to mine
Wat do I do if I turn the key but it doesn’t do anything, the odometer’s turns off but the other lights come on , it won’t even turn over
👍👍
Oz I need that tool! Where can I buy the pulsar?
They stop making them. I found mine craigslist in Virginia
I have been looking for one for long time! You are lucky!!
I typed in pulsar tool craigslist and an add popped up in Virginia i messages the person and they told me they still had the tool. Crazy thing is the add was 2 yrs old
@@OzMechanics Specialty tool, not many guys need one or will look that deep.
Too easy. Mine has bigger issues.
But nice video.
Thanks for watching
What about when all fuses are ok
Where are u located?
I'd like to praise your skill😢 but I'm old school and like to hear the conclusion by repetition that that stopped the fuse from blowing again and the check engine light resumed it's operation because that's why I watched because I have a similar problem I'm working on resolving and conclusion to diagnosis is what I'm wanting to hear.. if that makes sense.
Well on the video I showed the problem. Hope that helped thanks for watching
So how did that happen? They used a power washer?
2002 camry, 240k miles. Cut off while driving, no crank no start. Dash lights and headlights on. No blown fuses, no visibly burnt relays. Any thoughts?
If it cranks again, after cooling it maybe, the crankshaft position sensor, but, also check starter by hitting it with a hammer/rock; if it starts that is your problem, the maf or fuel pump maybe your last to check.but, there could be a fuse, relay, plugs or coils.
@@glorianica428 it's doesn't crank. The dash lights and headlights do come on. Checked the ignition switch and each position has power in the switch.
This might be the issue with my 2008 Scion tc
mine has no power to the solenoid fuel cut off it is the ECU
If ecu bad does it crank?
👍👍👍👍
Appreciate lol
I have an 05 grand cherokee that cranks but doesnt start after replacing fuel pump. itll fire up for a few seconds and then dies. Its driving me insane that I can't figure out why..
Make sure you’re getting sufficient fuel pressure