IS300 Manual Swap!!! (Step By Step)
Vložit
- čas přidán 30. 01. 2018
- The video we've all been waiting for! This is the IS300 manual swap Video!
PEDAL INSTALL VIDEO: • IS300 Manual Swap: Man...
FOLLOW ME!
Instagram: vt_bobby
Snapchat: Bobbyej8
Twitter: VT_BOBBY
Facebook: Bobby Verminal
Business Email: vt.bobby@yahoo.com - Krátké a kreslené filmy
Task List- Feel free to up-vote or add to description!
0- put car in neutral
1- 4 engine mount nuts, loosen w. out removing
2- drain trans
3- unbolt shift linkage
4- Interior
a: shifter trim
b: center console
c: shifter (4 10mm bolts)
d: unplug sensors
5- exhaust, ypipe back
6- driveshaft
7- loosen cross-member
8- unbolt harness under car( 2 plugs D.side 1 plug pass.
9- bell-housing bolts 14/17s
10- ground wire pass side , bolt also on d. side
11- starter
12- remove auto trans fluid line pass side(17mm wrench) (maybe cut lines)
13- remove flywheel inspection plate
14- remove tq converter bolts and rotate engine
15- remove cross-member
16- pull trans
17- remove on flywheel (8 bolts)
18- change rear main seal if you want
19- install pilot bearing
20- install manual flywheel (loktite?)[75-80 ft/lbs]
21- Install slave cylinder/ clutch line
22- Fill fluid and bleed clutch
DatGui you’re the 🐐
God bless ya man
You are the goat thanks
VT BOBBY What is the cause of the CEL from the transmission swap (I know you already have a CEL) ? I have a 2003 IS manual donor car to swap into my 2004 IS auto. I’m from NYC, so a CEL is a big no no. So whatever advice and/or tips you can give me, I would really appreciate! Just saw your video on the w55 short shifter and I couldn’t be happier! I was so upset when I looked up a short shifter for the w55 and they didn’t make one.
What kind of wiring did you had to do after the swap? ( speed sensor & etc) bout to do same thing with an 01 w/W55.
i just watched this whole thing and i dont even have a is300
Ditto!
me too lol
Same 🤣
same
same LMAO
This is probably going to be the best reference video for a manual swap
After months of fishing through the my.is forms only to find posts with expired photobucket images, and confusing text write ups.... someone finally made an entire video of the swap! Thanks alot dude, shits gonna be so easy now lmao
no problem bro glad i can help
VT Bobby is a Hero.
f%$k photobucket and their shitty behavior!!!
Cool thing its exactly same for Ls 400 /gs300 swaps I'm leaning towards Ls 400 and Gs 300
Absolute best auto to manual swap on CZcams. Period. It’s even helping me do a 5 speed swap on a 4Runner
I have been watching this video religiously to learn every step in this process because I plan on manual swapping my IS very soon and I’m mostly confused on the set up for the clutch pedal. This video is so much help!
Man, you guys don't know how lucky you are that you don't have to deal with rust. I'm super jealous of how clean your cars are underneath down there. Brand new cars don't even look like that after a year up here. Good job with the swap, it's a good feeling when it's done. This reminded me of manual swapping my old 240 back in the day.
I use fluid film in case I see any coming up or forming on say the frame. I have a Canadian import vehicle with some light rust underneath and I will spray it with that occasionally. It has actually stopped the rust from re-forming or getting worse and will sluff off the old rust. I hope that helps you!
Pittsburgh, Pa here........ nd maaaaan do i feel this 😂😂😂😂😂😂
My guy came A LONG WAY
Congrats !
I really love the disclaimer in the beginning. Keep doing your thing!! I have a manual ‘03 IS300 so I feel your enthusiasm! I wave to do some upgrades and mods too.... tryna be like you 🤷🏾♀️
subs are going up after this forusre. well deserved
This is what I've been waiting for!
Subbed after seeing the vid about what you’ll spend on parts for a manual swap... first vid of yours I’ve ever seen and I can tell you now your channel will grow in 2018. Great quality please keep it up. I’m looking at getting an IS300 after basic training, I should be home in July, so that will make for a fun summer project. Thanks for the tutorial!! Keep up the hard work!!!!!!
I’m so glad I found this channel 6 months ago when I bought my auto is300
Bobby congratulations man, HAPPY AND PROUD OF YOU MAN, been here since you had triple digit subscribers. Keep up the great work brotha. You movited me to manual swap my car🙏🏼🙏🏼🙏🏼🔥🔥🔥🔥
Thank you bro, i appreciate you watching all the videos! 🙏🏾
Thanks for all the videos man. Just got my is300 manual swap done with zero problems. Your videos helped a ton!
What’d you do about the ecu? And how did you start it
Ben Doverson take the switch from the transmission and put it in neutral and leave it plugged in
Been waiting on this vid, keep it up!
really impressed to see where your going :) good on you man! love this type of content
I appreciate it bro
Love your channel, I have an ‘01 IS300 I’m building. You give me the inspiration and ideas I need for my build!
This video got me heavy into working on cars. You helped me fix my broken auto lexus at 17😂 thank you
Great work! Awesome to see your trans all swapped in. Can't wait to see your impressions on how your IS300 feels to drive with manual
cubespeedequipment thank you I appreciate it!
Zane is the true friend always coming in clutch
Zane is the best
Oranges! Great video bro! Probably the best IS300 manual swap tutorial on CZcams right now. Gonna be using this as a guide if I swap my IS300!
thanks bro i appreciate it
Best tutorial on yt and the whole internet. Idk how other people have done it before. Wiring and emissions is what scares me.
Still love this video, I will be returning when I’m ready my friend, thank you. Also appreciate the attitude throughout
You did it. Mad props to you guys.
Im glad zane made it out alive and fritz... Freakin fritz...
Yo instant sub thank you so much this has been my dream car since I've been in high school and it's dumb I think to buy a manual because you know they were whomped on thank you so much brother man
Glad you got your manual swap done I bet it feels good to get that accomplished and you're more proud of it that you done it yourself. Oranges.
You guys are dope AF! Such a fun and informative video.
Very happy for you man. I'm hoping and crossing my fingers I can have a 5 speed in my is300 as well.
Great information for people who have never removed a gearbox, but as you said in the intro don't be judgemental though so great stuff, was hard as have done this a thousand times and in my head am thinking don't forget the stand for gearbox, the transmission lines, the wiring, starter motor, disconnect the battery first, hope to see the 1jzvvti go in soon, doing the same to my is300 or maybe ls1 t56 6 speed still undecided as love the 1jz but nothing compares to a v8 noise.
Great job, brother. Thanks for sharing your experience with us.
Oh fuck yeah, congrats Bobby!! Sweet car man been watching a minute
thanks bro i appreciate it!
My boi bobby on the come up
I've been waiting for this
Very good video. Been looking for this for so long. I am trying to get a Lexus IS300 but I am not able to find good deals for the manuals. Thank you so much for a detailed video of a manual swap for the IS300.
ZZAAAAAAAANNNNNEEEE BACK IN THE MIX
Great video brothaa. I’m actually trying to do a is300 build myself!! Definitely going to go the same route you did!
Hell yeah bro! Time to get that gte swap!!!
I know this is an old video, but thank you for making this. great video, I have a 2000 SC300 and this vid might be useful in a few years when I save up the crazy amount of money to do the swap haha!
Congrats on the swap!
Nice to see brothers working together
I will have to watch this entire video soon and come back to comment again. Good work so far from what I have seen. (:
Nice video. You had me intrigued the whole time.
I'm new to your channel bro but I appreciate the real behind your videos. I just picked up my stock is tonight. Plan to use a ton of your videos to do my mods. Good job on the swap though
Just got my manual swap done today on my sportcross ! Congrats B!
E.T's jdm House thanks same to you
Did you use the auto ecu or a manual one? I bought a auto 2j out of a 02 is with wiring and Im putting it in my mk2 supra just want to know if it will start and run with out having all the auto parts plugged in on the stock ecu? Or do I need a manual ecu?
Sweet vid... im about to geek on the rest of the vids
When you hear that carribean cadans, zouk music in the background.❤️
This is a great video for any manual swap
Great Job, Huge respect for you brother!
been watchin ya stuff for awhile..never commented before and i dnt own an IS but your vids are dope keep up the good work 👍🏿 .....watchin from CT
renford h thanks for watching bro 🙏🏾
Im in CT myself about to turbo my IS soon. But need to finish my supra build
Bro doooope video nice explanation. Prob lame of me but I was waiting to see how the clutch pedal assemble was done. But really awesome man!
This video gonna go viral!
Love the process bro keep it up 👍🏿
Great video, now you need an lsd differential, saw the m96 back there.
Absolutely love you headliner 😍💯
Excellent work bro I like your work
Keep it up
U have a bride future ❤
Dope video! I did mine last year and had zero info on how to do it. Ended up getting it done in 6 hours..
I’ll say this, a half inch impact gun cuts this time in half.
Let that transmission hang and it will be fine .
Awesome video! Very informative 👍🏼
hey man , loved the vid! haha
damn bro I might actually do this cuz of ur help... good man. Cheers from Toronto
Tough choice. I have one. The manual is cool, but that is one of the smoothest automatics I have ever driven.
Bro it's cool to see young Haitian mechanics, I'm one as well but I'm female. Good job guys #1804
Only reason I would do this swap would be if I really wanted a Spectra Blue Mica IS300 because they were only made in '01 & the IS3 wasn't available with manual trans until '02. Forunately, I love the color of my Absolutely Red 5spd IS3, so no worries. Anyway, was still a nice video to watch. Good job!
Good how to and good reference when i decide to swap the gs
You two guys seem cool as...
Love from Australia! RHD
Yo that headliner is fire.
Maaaan I fucking love this channel already and ive only seen 2 videos so far 😂
My auto to manual swap was different. I had a 2001 Automatic IS300 and then I bought 2 5MT IS300's. Super easy.
I heard on 01s you get a bunch of codes how did you go about getting rid of them? I’m about to purchase a 01 and I want to do a manual swap but I also live in a state that does emissions so I’m researching on to do the manual swap and get rid of cels
I love the brotherhood you keep...you got thinking should I do a swap on my gs..or buy an I.S.
Bro thanks for posting this video I plan on being a is300 soon and probably manual swap it eventuallh
Very helpful video man thank you very much!!!
Nice job broo!!💪💪
Use the same canvas you used in your headliner for the shift boot. Or something super hero related
Bobby all trimmed and looking clean👍
rstezza thanks lol
THX HAITION BROTHERS
I wanted to build a drift car when I get older. I wanted to do an IS300 but none were manual. Thx for showing me how it's done.
#haiti
Yo thanks so much I'm about to do a1j manual swap in my is. Thanks a lot bro
Thanks for sharing brother, might be a little too late but its the two brown wires in the middle to trick the car that its in neutral.
Sak pase Bobby good gob bro seeing improvements all around
brooklyn_ent nap boule, thanks
It's lit bro😱🔥
Beautiful car, owned one for many years, sadly had to sell it when I moved overseas and regretted it ever since.
Tip for dropping the trans, lower the car if you're on a lift then use a floor jack to slowly lower it
Finally I was getting anxious 😓 already wating for you to finish this mission ... But I fucked with it (pause ) .....
Dope video im definitely subscribed
manuel matias thanks
Heck yeah man good job I've got a Electric green is300 I've not seen any around that's that color but mine I'm planning on putting a 2jz gte in mine with the 5speed
Subbed bro! Cool vids just found your channel today
Darren Aguilar thanks bro
Can't wait to swap 😀
Congrats bruh
nice! thank you for sharing. i wish i could drive one of these (proper manual).
Love the shit talking back and forth like the walk through nice job for first time
Props my dude! What I’m trying to do to mine 😩. Can’t wait to see the 1j in there 👀
thanks bro
VT BOBBY why 1j not turbo 2j?
Yo Bobby that thumbnail is dope
thanks bro
Good shit, about to start this process soon aswell.
Ayeee that kompa in the background!!!
Awesome vid of a transmission swap.
Super happy for you bro
thank you
i'm proud bro :D
Good shit bro !!
For me, the easiest way to install the clutch is flywheel > alignment tool > friction disc > pressure plate.
Great video! Can you add some footnotes so people can reference where different parts of the swap is taking place, i.e. 2:34 clutch pedal install, 10:42 manual gauge cluster install.
Thank you for this video! 👍
A legend