Can you disable buttons that you map to the paddle? I wanted to disable the right thumb stick and map it to a paddle because I accidentally squeeze it while playing games, however when it’s mapped to the paddle the thumb stick (r3) still works.
Im comsidering getting this but i have a couple questions. 1. Can you map the paddles and trigers to two different buttons, like making r1 r1+r2, or making r2 square plus x etc. 2.can you remap the shoulder/trigger r1 and r2 whithout changing the face r1 r2 for the fightpad?
@@memesxy95 The app works fine, just need to make sure you don't have ANY conflicting apps that takes over the controller such as reWASD etc.... but don't worry, it works perfectly now. Took me awhile to figure out why it did not connect until I forgot that I had multiple apps that were conflicting.
Hi, i was wondering if you can test what is happening if you remap a paddle button to up and use the victrix like an leverless controller. Does up take priority on down if you press down before up ?
If you press 2 directional inputs at the same time, you'll get a quarter step in between except in the case of opposites. they just cancel out and give you neutral. for example, if I hold back on stick and down on dpad, i get downback. if I hold back on stick and forward on pad, i get neutral. i can hold down on stick, back on paddle and forward on pad, i just get down input.
I’m in the exact same boat right now. Extremely angry and frustrated. I feel like I was robbed almost 200 bucks, cause this is useless without the control hub app.
Definitely confused too because I don't have a computer and is that the only way to update it? Can it not be done on the ps5 even though it's a ps5 controller?
I need to map shift options to my controller. The Xbox allows that. Does this controller allow that? T make it clear: I can double bind everything with a shift trigger and a dedicated shift button on xbox elite. LB = A Shift+LB = X I need that exact feature.
On Windows Press Windows Button and X, go to device manager and disable 360 controller driver then restart. After restarting the PC plug in the dongle and connect to the controller. Once connected open the hub app and it will connect and update. Note: going to have to do this everytime for it to connect
I'm on windows 11. I also noticed I uninstalled steam to as well. Another thing is with this method I had to make sure everything from the dongle to the controller were fully connected before opening the hub then it connected in that session only if I reconnected I had reboot the PC. Another thing you can before doing these steps again there is a registry update for the controller you need to download from pdp to make is compatible. That maybe something you need to look at
I need help, my PS5 victrix controller tells me that it is from Xbox when I start the software and I cannot configure it when I start any game, it tells me that it is from Xbox. Is there a way to solve this?
Everyone in my house has a MacBook or a chromebook so I can’t update my gd controller. The baked in deadZones are ruining it for me. If I could access the software I could zero them out ughhhhh
If you don't have a computer why do you want to mess up with the software?, if you play console those settings are gonna be ignore, they are not saved by the controller, they are saved by the software ON PC, if you plug it to your console will not remain
About time on a update and it been sitting for a month . Dualsense edge took over and now my hitbox is more fun. On my better pc it didn't work and on my old pc it works😂😂😂😂
Hi how do I update the firmware threw my playstation? Can I get this app on PlayStation because I can not find it or any information about how to do it threw playstation
@@FrameCounting hi thanks for the replie. Im having a issue after one week of use when i push my left analogue in warzone i stop tactical sprint all of sudden then starts again ive tried to recalibrate but is still the same is there any way to fully reset the control to default as I can not find any info in how to do this
LOVING that music!
I liked your video, could you make a review aobut the NYXI Wizard? Wanna know your opinion and if u recommend to buy it.
great app works 100%
Can you disable buttons that you map to the paddle? I wanted to disable the right thumb stick and map it to a paddle because I accidentally squeeze it while playing games, however when it’s mapped to the paddle the thumb stick (r3) still works.
Is the polling rate still the same currently?
Podrías indicar el enlace de la app? Y saber si las configuraciones q haga sirven para ps5
Great video mate
Im comsidering getting this but i have a couple questions.
1. Can you map the paddles and trigers to two different buttons, like making r1 r1+r2, or making r2 square plus x etc.
2.can you remap the shoulder/trigger r1 and r2 whithout changing the face r1 r2 for the fightpad?
i have the same question.
dont, the app doesn't work if you have ever installed steam on your PC
@@memesxy95 The app works fine, just need to make sure you don't have ANY conflicting apps that takes over the controller such as reWASD etc.... but don't worry, it works perfectly now. Took me awhile to figure out why it did not connect until I forgot that I had multiple apps that were conflicting.
if i set the controller triggers on my pc will the settings carry over when i go play my ps5?
Hi, i was wondering if you can test what is happening if you remap a paddle button to up and use the victrix like an leverless controller. Does up take priority on down if you press down before up ?
If you press 2 directional inputs at the same time, you'll get a quarter step in between except in the case of opposites. they just cancel out and give you neutral. for example, if I hold back on stick and down on dpad, i get downback. if I hold back on stick and forward on pad, i get neutral. i can hold down on stick, back on paddle and forward on pad, i just get down input.
Victrix pro or dual sense edge how have the better imput lag ?
because you don't use hardware like The Phantom Naut is the safest and most reliable way to see the inputlag.
So can I not download the app on my phone? If I have to have a computer to remap buttons on a controller that doesn’t even have rumble imma be pissed
How do you pair the controller with the dongle?
Ok but is the Victrix control hub app on the PS5? If not I'm stuck cause I don't have a PC. I have a Series X though
I’m in the exact same boat right now. Extremely angry and frustrated. I feel like I was robbed almost 200 bucks, cause this is useless without the control hub app.
Definitely confused too because I don't have a computer and is that the only way to update it? Can it not be done on the ps5 even though it's a ps5 controller?
Would love an answer to this cos I’m the same. Just got the controller but I don’t own a pic just a ps5 and series x
Did I understand that correctly after the update of the controller you have more delay?
The difference is negligible if you consider the margin of error. They are basically the same.
says could not connect because my controller is being used?
when I launch the software it says connection impossible and I tried everything but nothing works
I need to map shift options to my controller.
The Xbox allows that.
Does this controller allow that?
T make it clear:
I can double bind everything with a shift trigger and a dedicated shift button on xbox elite.
LB = A
Shift+LB = X
I need that exact feature.
Does not have shift features
@@FrameCounting So the people I asked on amazon lied to me... well.
Does the ps5 have this feature at all?
Any third party controller?
They may be confused with re-mapping the buttons vs shifts.
Olá você pode me indicar alguns controles para jogos de luta para computador,que tenha um bom tempo de resposta ?
How to install that consol on ps5
On Windows Press Windows Button and X, go to device manager and disable 360 controller driver then restart. After restarting the PC plug in the dongle and connect to the controller. Once connected open the hub app and it will connect and update.
Note: going to have to do this everytime for it to connect
I'm sorry I don't see a 360 controller driver on my device manager. Is there another specific name I should look out for? Thanks for sharing.
Tried almost every way including using the app in a brand new PCs. Doesn't work. And you method doesn't work on both of my PCs.
Spent countless hours trying to figure it out. Still has to wait for an official release.
maybe it doesn't work on Windows11?
I'm on windows 11. I also noticed I uninstalled steam to as well.
Another thing is with this method I had to make sure everything from the dongle to the controller were fully connected before opening the hub then it connected in that session only if I reconnected I had reboot the PC.
Another thing you can before doing these steps again there is a registry update for the controller you need to download from pdp to make is compatible. That maybe something you need to look at
How do you do this without a pc?
I need help, my PS5 victrix controller tells me that it is from Xbox when I start the software and I cannot configure it when I start any game, it tells me that it is from Xbox. Is there a way to solve this?
Did you change the platform on the controller?
yes
@@FrameCounting
Can you comment on the quality of the dpad vs a ps4 dpad?
For fighting games and which dpad accessories is best on the controller? The diamond is interesting
I still cant get the app running on pc even went through their official method of fix.
Check my message above to see if that helps
Did you get it to work?
@@adam76ooo no
Everyone in my house has a MacBook or a chromebook so I can’t update my gd controller. The baked in deadZones are ruining it for me. If I could access the software I could zero them out ughhhhh
Did you ever fix this? That’s the issue I’m having as well
They just assume you have a PC. It’s bullshit
Victrix controller vs beitong fighting gamepad
Can you do this on your phone? Cuz I don't have a computer 😅
If you don't have a computer why do you want to mess up with the software?, if you play console those settings are gonna be ignore, they are not saved by the controller, they are saved by the software ON PC, if you plug it to your console will not remain
@@Aclors4 i do have one but I do everything on my phone I was hoping there was am app on my phone I could use lol but no worries I'm good now
Note: this thing bricks your controller if you have steam installed
Do I need to a firmware update if I am just using on
Ps5
Nope
About time on a update and it been sitting for a month .
Dualsense edge took over and now my hitbox is more fun.
On my better pc it didn't work and on my old pc it works😂😂😂😂
Do I need the game hub app to use it for ps5
I would like to know aswell
It's a shame because you really can't anything else like this controller
Can you download this on Mac?
That’s wat I’m wondering or a iPhone 📱..???? Cuz I have such and I can’t download the app
Same problem here...
Hi how do I update the firmware threw my playstation? Can I get this app on PlayStation because I can not find it or any information about how to do it threw playstation
I don’t think you can unfortunately…
@@FrameCounting hi thanks for the replie. Im having a issue after one week of use when i push my left analogue in warzone i stop tactical sprint all of sudden then starts again ive tried to recalibrate but is still the same is there any way to fully reset the control to default as I can not find any info in how to do this
Mine dongle is dead on update and now i have 179$ piece of garbage.
See if you can reach out to Victrix customer support about it
LoL. Only a sicker pays nearly $200 for a controller anyway.
@@malcolmjelani3588 i agree. just got mine and it wont connet.
@@malcolmjelani3588Don’t be jealous just because you’re poor. It’s not a good look
hwo do i connect it to my consol or pc?
I can't get all the button working on pc gta