HOW TO | Determine Vinyl Siding Starter
Vložit
- čas přidán 21. 03. 2021
- This channel is for educational purposes only. The methods taught in these video's are just a few of many ways to do construction. Use your best judgement of what will work best for you and what is required by code in your area. Like, subscribe, and hit the bell.
#vinylsiding #siding #starterlevel
Love to see the videos keep em coming
Awesome video! Thanks for sharing.
man I can't wait to use your formula. I don't hang siding enough to be well versed - I have to scratch my head every time I start a vinyl siding job. Thank you for sharing!
Very much appreciate all your vids.
it'll definitely help!
Thank you for all your videos that you make you are so amazing, person and construction you are so phenomenal!!! 💯⭐💯⭐💯⭐💯⭐💯⭐👏👏👏👏
Hell yeah another great video
For the lights I cut a piece of pvc trim board and mount the light to it. Put j channel around it and it looks great
Always good content. I'll be buying the app when your ready to release it
That app sounds like a great idea man. I still do it all willy nilly which takes more time to figure out what cutoffs will work where with the least amount of waste so I can see this being very useful. Thanks man, take care
it should be! can't wait to get it to you guys so you never have to cut a full piece short in the middle of the wall lol
Man I'd love that info on the siding that's awesome that you took the time to do that
coming soon, it was one of the biggest headaches of my life
Love your videos man!
Glad you like them!
Golden like a shower, Lol one of my most used sayings! You just made my day.
There he is. What’s up brother? Have t seen a video in a few weeks. Glad to see your staying busy. Bang on brother
always bust thanks!
We run a strip of white aluminum down to the ground when it goes into the dirt like that then put the starter over it. An option for above that stone would be to do a freeze board and keep it going around the gable looks like it would like up just a quick thought.. might look weird with siding being that narrow
i do the same thing like a 3/4 by 3inch piece of white. we use our scraps all the time because if they are scratched a bit you would never know. great video!
Respect u bro learned a lot from you
glad i could help
We’ve have to step 32 inches in the studs by code. I know 2 ft doesn’t work but that’s what they want. Plus tyvek inspection and sheeting inspection on roofs. Just because I notice you don’t have to.
Hell yeah man
Your formulas are very smart! Is house wrapping over t-111 over kill do you think?
mmm. not sure really, i actually always have until this one lol i am not seeing anybody else in my area do it so i was like, alright guess i wont.
I hired this kid who worked for a big siding company around here. Kid was taught to just clip no nail between windows or no nail 3 rows. First three months had him leveling every piece to get that nonsense out of him
haha dangg what? thats crazy...i've done that a time or 2 on short ass 6 inch pieces. but thats it
@@NWIVeteranConstruction ya maybe some smalls. This dude would nail maube 3 rows of a wall
Been doing siding for 7 years. Have you done any hardie jobs. Up here in Michigan alot of companys are selling nothing but James hardie jobs.. i sub contract and with hardie I'm making 325 a square. I'm loving it
Charging 325 a square or making 325 a square profit?
Glad to see you are well!
Next video add a text or tell everyone who sees the video to unsubscribe and subscribe back. 2 clicks basically.
This will start bringing old viewers back.
Thank you for your videos. The longer the better!
Really? How so lol
@@NWIVeteranConstruction
The issue with the youtube algorithm is that once you stop posting at more or less regular intervals, it stops showing your videos to your subscribers and other potentially interested users on the Home Feed.
For example:
The last video I saw from you was the caulking one.
After that, you went rogue for me.
The last two videos were not recommended to me in my feed.
I had to manually search your channel.
There are 3 main tabs (pages) that youtube users usually are at.
Home Feed
Explore (Trending)
Subscriptions Feed
Back in the day, the subscription feed was the most important page. Then the Explore (Trending) page became #1, also the Home Feed was introduced.
Now the Explore (Trending) is 1st place, Home Feed is 2nd place and the Subscription Feed is basically inexistent.
I order to get on the Explore (Trending) page you need to get hundreds of thousands of views in a very short amount of time. This is very hard to achieve since you are not creating cancer content like 99% of those who are on that page.
If you want to get your videos on the Home Feed of the people that used to watch your videos and that might be interested in your content (Note, I didn't say subscribers) you will need to do a few things.
You have the ability to use the community posts feature. I might have seen them on youtube. It's a text post with a link/video/image/voting poll attached to it.
Start using this feature. This community post will be seen not only by your subscribers but also by people that have interacted with any of your videos.
You can do the following.
First.
Ask questions regarding what videos people would be interested in. It does not mean you need to produce content on-demand, but I can help you with some new ideas.
Create a voting poll on (whatever you think is worth it). What are the best shingles? Which one would you use? Is this tool better than that one? Do you want to see long videos or you prefer the short format? ( I can answer the last question, the long videos are great, I love watching listening to them when I work/cook/clean the house, I also sometimes grab some food and just sit down have a break and watch them, also great before sleep).
At first, you will get little response, but with time you will get more and more people engaged with them.
This will also remind people that you are alive and they will search for your new videos even if they didn't get them in their Home Feed.
Second.
Live streams are a great way to interact with your community and to boost your activity inside youtube.
This shows youtube that you are engaging more with your audience just like with the Community Posts, and they give you a better score inside the algorithm.
If you can keep your live stream over 1hr that's really good in youtubes eyes.
Also, this is my honest opinion about you live streaming. If you can do it on the job site that would be great, people (and me lol) would love seeing you work live and having a chance to interact with you.
Make sure you announce the livestream. Search for these keywords in order to see how to do it. (How To Set up And Schedule CZcams Lives)
This will appear in people's feeds and they will have a chance to hit the follow button. Once you go live they will get a notification. Also they will know exactly when to expect the video to drop.
Announcing it through community posts is also a good idea.
Make sure you do a few test runs since you might need some elbow grease before you get the hang of it. (on how to set it up properly)
Make sure you have a powerbank for the phone with you. The livestream eats up battery fast.
Keywords for videos about livestreaming setup. (How To Live Stream On CZcams - Start To Finish)
Streaming once a month is a great way to keep everyone in the loop and to grow your audience. If you could do it a couple of times a month that would be even better.
Third.
I know this is the part that everyone hates, but it's a vital part of the youtube algo.
In the editing process add a couple of things.
Search for the following things:
Free Download: Subscribe Button + Notification Bell (+ Sound FX) [Green Screen/Alpha Channel] HD
DaVinci Resolve (Free Video Editing Software) - It will cost you nothing and it's like Sony Vegas or any other premium (expensive) video editing software.
You can find all the tutorials you want on youtube on how to add the subscribe button + sounds to your videos. DaVinci is a very popular software and has a huge user base.
Add this at the start of the video somewhere in the first 30-60 seconds.
Add it at the end of the video 30-60 seconds before the ending also verbally remind people about Liking/Subscribing/Leaving a comment.
All of the above will boost your views.
At first, it sounds very complicated, but after you do all of the above a few times, you will not only be the fastest shingler on youtube but also the fastest youtuber at the end of the day.
You will learn to create templates and you'll optimize your workflow after a few tries.
I really do hope this answers your question and helps you in creating new videos, boosting your views, and having a great time with your audience.
Thank you again for all the educational videos you make also keeping them funny and hopefully longer than 15 minutes. (The hour-long are my favorites)
Wish you all the best, stay healthy and safe!
P.S.
Search Google for vidIQ Vision for CZcams, it's an extension for the chrome browser, there is a Firefox version also if you don't use chrome. This extension will help you see what kind of keywords to use in order to optimize your youtube videos.
We cut 3ft off each pc of siding for starter cuts
Awesome video good to see boycub.
My 4 yo is glued to my hip just wish you didn't swear. or you would beep it out. Keep up the great videos
Didn't think of that. Will definitely do my best, sorry
@@NWIVeteranConstruction when you gonna answear your phone.???
Lmao bro I got it right next to me but it's always on silent n the mailbox is full. I got too much work n I'm too busy to answer this Damn thing myself any longer🤣 bout to give it to my gf
Ya i know the work thing well i got the cash for that roof job we talked about make great video
@@5050johnsmith can you shoot me a text? Im. I'm. Seeing anything from you
How long did that job take your crew to finish?
We're not done yet, but siding soffit n fascia n gutter should be done on this one in about 5 working days For us
@@NWIVeteranConstruction Right on. How many guys you got working for you now? You guys working 10s?
@@alexness7788 4 besides me. I don't really work all that much at the moment on the jobs though. And no 10s lol I think they work from 830 to 4 usually. Sick fcks
Should have just used j channel instead and cut the bottom of you first piece of siding to make it level
that was last resort and i wouldn't have like it
On the starter if you started from the low point and the house was that out of level, why not run j channel instead of starter where it ran high?
Well tbh that's kind of the easy way out and will draw unnecessary attention to the fact its different when it's done. All we had to do was determine where we were going to have problems and cut it off. It was Not that tough and is worth it in the end because everything looks uniform as it should. Personally I would never do that lol even a remodel job like this should look like new construction in the end
That's fair. I would use coil stock or j channel rather than bring out the spade lol.
Why snap a level laser line? I go off the soffits. Putting level siding on a sunk off level house will it not throw your windows off and your top piece?
@@Phoenixrising8313 I agree. I like going off the soffit too. I usually check from that line up to the soffit as well and tweak it if necessary or if possible to get the best outcome. Just something extra I like to do. When you put that laser level line you can check both and it makes the install easier. The corners line up perfect, you get the same reveal on the soffit most times. Works well, and I would personally rather have it match up with the soffit instead of a window. All preference really. And I absolutely have had to use coil stock as well
@@NWIVeteranConstruction I like your videos you work hard and have a lot of knowledge and skill. It's funny how you joke about "sabatuer" that's really funny and made me laugh.
Are you guys from colorado?
Nope
Also that corner is sitting way to tight one the stone. If it’s bowing now it’s gonna be bad when it warms up. But I do like that 30 in stagger. You def got the brains man. But like a wise old man told me once a roofing siding mech is just a carpenter with his brains beat out 😂
lol wtf bro.
We need Roof Olympics 2021
Bro you need that cordless gun wit the siding tip, shits light too
that sounds good lol
Wouldn't pass code by me. Always flash, better yet, run 1 row of LP 12". Because 1st time thw weed whip comes out..... pull transitional number from soffit,thwn started on top of LP, clean, water proof, top row all the same size.
i like the LP idea better than flash. good point
not roofing anymore?
back at it monday
nice man what state are you in? I'm in cali always looking for extra work i have almost 4 years experience
@@999shawn Indiana
oh man thats hella far lol
- Slow down the camera dude. :)) Cheers with a cold beer from London.
i tried to lol sorry.
Fucking CZcams unsubscribed me.... Wtf! I was wondering where you've been!!!
Hey Zach, great video as always. I just posted a video of a chopped up roof I did. Check it out if you have time, let me know what you think!
No