Toyota 2SDK8 SDK8 Skid Steer Steering Adjustment, Filters, No power issue Part 2

Sdílet
Vložit
  • čas přidán 25. 07. 2020
  • Part 2 will cover the steering linkage adjustment as well as an overview of the fluids and filters I will be changing.
    It will also cover a wiring issue that causes a no power situation when the key is turned to on.
    Wheels: 16.5" x 8.25" with approx 4" offset
    Replacement wheels: www.solidtiresandtracks.com/16...
    Tires: 10x16.5"
    Napa 3386 fuel filter
    Toyota 23302-31960-71
    Napa 1521 oil filter
    Toyota 15601-78101-71
    Napa 51551 hydraulic filter
    Toyota 67512-41803-71
    Cyclone air filter 17791-22000-71
    Air cleaner 17803-U2051-71
    Fan Belt 89323-76004-71
  • Auta a dopravní prostředky

Komentáře • 19

  • @bertfromnz9069
    @bertfromnz9069 Před 3 lety +1

    with the glow plug - original they had an element and you used the key to glow it, you could see how bright the element glowed, mine never worked - I fitted an auto glow timer

  • @mitchm2527
    @mitchm2527 Před 3 lety

    I Brought mine last year, also it's hard to get parts, I have to change all the fluids on it too, I have the Honours menu that came with it

  • @mitchm2527
    @mitchm2527 Před 3 lety

    That light is 4 the glow plug u have hold the key to the left until it turns red b4 u start it

  • @Baydotheopalhunter
    @Baydotheopalhunter Před 2 lety +1

    Where did you buy the steering linkages? Mine are worn out.. Having to replace the rubber vibrating mounts that hold the steering arm to frame

    • @petercoit3959
      @petercoit3959 Před rokem

      I have 2sdk7. Replaced mine from a local bearing supplier(acme bearing buffalo NY) Toyota are metric all they had were SAE so I got the next size down and tapped them. M10 1.5 I believe. Also had to run a bolt thru as mine were just open eye. 6 bux each. To order the metric was like 25-30$ each

  • @timsimeone
    @timsimeone Před 3 lety

    That switch, on mine at least is for the rear work light. the little bulb fixture should be mounted in the hole right next to the switch. its an indicator light for the rear work light. again, at least on mine. its a red bulb

  • @billpetrizzi2614
    @billpetrizzi2614 Před rokem

    Where did you get parts

  • @timsimeone
    @timsimeone Před 3 lety

    Hello,
    Anyone have a part # for that return spring? I'm missing half of the assembly on the right side if you're sitting in the machine
    I have 2 SDK8's

    • @LILEVO
      @LILEVO  Před 3 lety

      both sides are the same, 33580-42800-71

  • @kr4dh4x0r
    @kr4dh4x0r Před 4 lety +1

    I see your SF2 machine!

  • @bertfromnz9069
    @bertfromnz9069 Před 3 lety

    have you got the manual? I can send it to you

    • @TheHomePros6221
      @TheHomePros6221 Před 2 lety

      Could you please send me the manual? I just picked up a sdk7

  • @jonthancreech1556
    @jonthancreech1556 Před 2 lety

    I have on for sale if anyone is interested Toyota skid steer sdk8

  • @angelicalefter9200
    @angelicalefter9200 Před 2 lety

    Salut cine mă poate ajuta ce ulei trebuie la hidraulică multumesc

    • @LILEVO
      @LILEVO  Před 2 lety

      czcams.com/video/B102rwjANBw/video.html

  • @JBFromOZ
    @JBFromOZ Před 3 lety +1

    G'day mate, you might be interested in my video on the SDK8 Dash Rebuild I did on my 2SDK8, I've also included many 3D printed parts on thingiverse for the rebuild I did

    • @JBFromOZ
      @JBFromOZ Před 3 lety

      playlist here if interested czcams.com/play/PLAQog8q6pOF3XEOr8DUIEbLoANCQTwKS3.html

    • @starionslider2116
      @starionslider2116 Před 3 lety +1

      All 4 of the yellow warnings should be on with the key. Then go out when it starts up.