HOW TO Use CenDale's DTF Film & DTF Powder: Sublimation Hack!
Vložit
- čas přidán 22. 08. 2024
- In this video I will be trying out the DTF film and DTF powder that CenDale very kindly sent me. This is another DTF sublimation hack using my Epson Ecotank 2720, along with Cosmos ink. I will be using a Fruit of the loom 90% cotton/10% polyester blend women's v-neck shirt. If you're interested in these products, you can use the link below as well the coupon code. Thank you for stuff by.
Get 10% off discount code using Code: MGcrafts
www.amazon.com...
For the Puff Vinyl-glow in dark use Code: V3C8NKIZ
www.amazon.com...
Feeds through the ecotank I have easily (eat-2400) 🙋♀️ cold peel works best and I find 320° F for 40 seconds works well for my press I burned the cotton any higher than 340° 🤩 love your shirt and your technique 💯
Thank you so much.
New subbie starting my journey to fundraise for my daughter’s liver transplant. I’m taking notes and appreciate your content
Thank you and welcome! Happy to havw you here. 😊
so when you took the paper out it went straight to your printer the way you took out. so easy i was trying to see if it says front back on the sheets lol. thanks for your video now i know how to use mines
Oh good. I'm happy to help.
Thanks I got it to work by putting painters tape on the back across the end and a piece down the middle like a letter T... this is the only way that works for me
Thank you for the video testing this product. I'm curious why under the Advanced Tips the first one is: "Leave film to dry fully before apply the powder." Why is that? When normally instructions are to apply powder right away after printed.
Yeah, i didn't do that, and I didn't have issues bcuz of that
Thanks for the video they said this kit only worked with white shirts im guessing it works with all color fabrics since this is not a white shirt .
It works well with light colors, but will not show up on black or other really dark colors.
@@mgcraftsandmore how long would you say the powder would last? did it last for a while ?
@shonondabeats618 yes, it does last quite a long time.
I have the epson 2803
Did you wait for the ink to dry? The advanced tips section of the paper that came with the kit says to buy I don’t find it drying even after 10 minutes!
No I did not. You can give it a minute, but for me it doesn't make a difference.
That is nice
Thank you for your review on this DTF powder and transfer film. I may have to give it a try. Is there an odor with this powder? I have used the brands that Crystal Ann demonstrated and tend to lean towards one more than the other because I had better results.
@nancyKluz I didn't notice any smell at all, which I'm glad about because I get migraines & that type of smell would probably be a trigger.
Thank you for the quick reply. That is good to know. :)
What's the temperature you use on the grill
It has 1-4 on the dial, so i had it on 2. I can't remember the temps right off the bat, but I think that was the perfect temp for this.
Thank you, I have one and the temperature, it start at 200 , 400 and the last one it's min after the 400
What is confusing to me, as they say to let the ink dry before putting on the powder? Every other video or tutorial I’ve ever seen said to do it while it’s wet.
I've always dine it when the ink is wet. Some products may have different instructions, so you really need to watch for that.
Can I use a inkjet printer?
Yes, but I suggest you watch my other video.
czcams.com/video/_t_3pk-h2Fs/video.htmlsi=lDs56P-SNU8npp4P
What temperature, did you use for the grill
Can you use other powders with cendale I use tons of their stuff
I have different powders as well. I would just use the directions for the specific powders.
I was just curious thanks cendale is a great product@@MonicaGarza893
What size did you use to print the image
I believe this one was an A4 size.
I have just bought this product, I am having so much trouble feeding it through my printer, I've tried so many ways. you said at the end that it went thru by putting a stack of paper behind it. I'll give this a try. Did you not tape it to copy paper?
After putting a thick stack of paper, I haven't had to tape it to anything.
What I have found works is putting a layer of like Lionel like shelf paper removable vinyl stuff like that on the back of the film and then it goes through take it off and then put it off to the side and try to use it again a different I tried putting just a little ways up and it always printed just to I tried taping the paper to the back. Didn't work I tried everything
Amazing tutorial video🤩Thanks for your kind sharing!!
Thank you. I appreciate you for trusting me to try out your products.
How about on dark shirt like black, does the design is still visible?
No this dtf hack is for light colored shirts, unless you use a white htv background. I'm planning to make a video trying that out. I'm just waiting on my order to come in.
Can you tell me what is the diffence between DTF Ink film and DFT film for Sublimation. Love your video
I've only used DTF film & powder using sublimation ink. There is such a thing as DTF ink, but I can't talk to that.
@mgcraftsandmore thank you any way.
You're welcome
What settings did you put on your printer? For the life of me I can't get it to work
For my small printer I use presentation paper matte, high quality, adobe RGB 2.2 gamma, mirrored. I can't get the right settings for my large format printer. Its frustrating
...although it may be different if you have a different printer. Mine is an Epson ecotank 2720
What was your print settings? I keep getting black lines 😢
For my 2720 printer, I use the same as my regular sublimation prints. Presentation paper matte, high quality. You can go into tour maintenance settings & maybe reduce the saturation & see it that helps.
Is that regular epson ink or sublimation?
This is sublimation ink.
Hello I have a question
Please ask.
@@mgcraftsandmore can I use A3 paper
@yoanavlogs875 yes you can if you have a larger format printer.
@@mgcraftsandmore I have sawgrass 1000
Hello new to your channel, can you use a dark or black shirt with this hack?
Unfortunately you cannot. Because the ink is transparent, its always best to use light color shirts, but there are other products out there that you could try. I've done it once, and it was a mess, but with practice, it can come out cool too.😊
@@mgcraftsandmore Thank you
What ink do you use?
I use Cosmos Ink sublimation ink in one printer, and on the other, I use A-Sub sublimation ink.
@@mgcraftsandmore Which ink do you like best?
@lynxlady5355 I love Cosmos Ink. I have that in one of my printers and A-Sub in the other. They're both great.
What kind of press is that?
This is a Tusy auto press, but it was only out a couple of months when I purchased it off amazon, and have been having problems. You definitely want to do your research. I can't recommend it with some of the issues I've been having.
@@mgcraftsandmore thanks for the quick reply.
You're welcome.