Amazing what these guys can accomplish without computers, robots and modern machinery. Using just their strong minds and body, they get the job done. They are very hard workers and should be proud of what they have accomplished.
I know your all going to moan about Health and Safety but given what Tools they have and the conditions they work in , They get my respect as i know just how hard it can be being a retired Plant Fitter working in these conditions . Great work and Awesome job 😁😁🤘🤘🤘
Are those rivets good enough? Do the big factories use the same method or they do some heat treating at the end? I do not know about the industry but I think the chassis might need a kind of stress relief at the end
Just with a basic workshop and their good talent, they built a built truck. Really good to see. This should be CZcams's main agenda, for what it was meant for. Please comment and like 👍
I wouldn’t hesitate to hirer these incredible men to repair and reconstruct my damaged truck or smashed vehicle because there is no other options in my mind 😊they are soldiers of enterprise and creativity there long term visual focus on their goal is commendable and inspirational
They do a lot of things that wouldn’t be allowed in the U.S. but they do everything manually. They are definitely hard workers and they know their jobs. Make good field mechanics. They’re used to working that way. Impressive job.
Ok guys, need you to be very honest here, do you toss a coin to see who holds the pin and who hits it with the big sledge hammer……. Great video, I laughed the other day when I was watching another channel about truck work and the guy finished the video facing a bit of a problem and asked for viewers opinions. I always like to read the opinions and ideas people send in and two of the comments said ask restoration King how to do it, they can build anything out of anything, I had to laugh as you guys are so versatile. Thanks for posting, great video for sure
Этот ролик нашему автопрому надо как учебный показывать. А то наши со станками и в цехах ни х.я не могут. Вот только интересует меня один вопрос. Под какие грузы такое усиление рамы и ходовой? Мотор то не особо мощный.
These are pretty much the tools and techniques of the 19th and early 20th century. Whilst people celebrate that as the glory days of "manly men doing honest work" during industrialization, people laugh at it when it's done in developing countries. Here you can literally see what life was like for your great-great-granddads - show some respect!
So very impressive. Basic tools nothing fancy. This crew is efficient n safe n fast. And a nice finished product. Great job guys. Berry impressive. Please be safe.
@@vippersona8925 не, они окошко в новой раме делают и там видно номер старой рамы которая вварена в новую, просто на этом видео не видно.... ну и да, похоже техосмотра у них нет...
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 HO BOY WE IN DEEP CRAP IF YOU THINK THAT'S GOOD . I GUESS YOUR AT THE SAME LEVEL AS THEM . GOD HELP US ALL . LET ME KNOW WHEN YOUR ON THE ROAD SO I CAN STAY AT HOME AND BE SAFE 🤣🤣🤣🤣🤣🤣🤣
We in the West have all the damn regulations in the world so you in the far East don’t have to have any, right? According to the DoT rules in the US, you’ve got enough steel sitting on three axles in that thing to max out the weight on every axle with the truck empty. 12K lbs on the steer + 34K lbs on the tandem for a GVW of 36K lbs. I think that your truck will weigh 36K lbs empty once you put the body on it, right?
Amazing what these guys can accomplish without computers, robots and modern machinery. Using just their strong minds and body, they get the job done. They are very hard workers and should be proud of what they have accomplished.
These are called men . What a incredible work even without technology. Just hard work 🔥
I know your all going to moan about Health and Safety but given what Tools they have and the conditions they work in , They get my respect as i know just how hard it can be being a retired Plant Fitter working in these conditions .
Great work and Awesome job 😁😁🤘🤘🤘
Are those rivets good enough? Do the big factories use the same method or they do some heat treating at the end? I do not know about the industry but I think the chassis might need a kind of stress relief at the end
Just with a basic workshop and their good talent, they built a built truck. Really good to see. This should be CZcams's main agenda, for what it was meant for.
Please comment and like 👍
WILL COMMENT AND LAUGH 😂😂😂😂😂
Им хороший цех и станки они все создадут. Молодцы
Hello ❤
Это точно
These guys give a new meaning to "SledgeHammer" mechanics !!!
I'm amazed at how they build without any fancy tools..
I wouldn’t hesitate to hirer these incredible men to repair and reconstruct my damaged truck or smashed vehicle because there is no other options in my mind 😊they are soldiers of enterprise and creativity there long term visual focus on their goal is commendable and inspirational
Definitely also my opinion! Honest and hard work ...
Truly superb to watch them work I totally agree 👍🏻
They do a lot of things that wouldn’t be allowed in the U.S. but they do everything manually. They are definitely hard workers and they know their jobs. Make good field mechanics. They’re used to working that way. Impressive job.
Guys we proud of you ❤. Wishing you good luck 🤞. Plz stay safe
No wonder they make great cricket players holding that punch while a guy hits it with a hammer and does not miss or he would destroy the guys hand!
It's hard work but ma sha Allah 😅
Ok guys, need you to be very honest here, do you toss a coin to see who holds the pin and who hits it with the big sledge hammer……. Great video, I laughed the other day when I was watching another channel about truck work and the guy finished the video facing a bit of a problem and asked for viewers opinions. I always like to read the opinions and ideas people send in and two of the comments said ask restoration King how to do it, they can build anything out of anything, I had to laugh as you guys are so versatile. Thanks for posting, great video for sure
that rivet set has seen some hard work!
Wow, nice job, you are some hard working guys. I look forward to more videos. 😎👌👍🔥🔥🔥🔥🔥🔥
Этот ролик нашему автопрому надо как учебный показывать. А то наши со станками и в цехах ни х.я не могут. Вот только интересует меня один вопрос. Под какие грузы такое усиление рамы и ходовой? Мотор то не особо мощный.
Какие молодцы.На коленках создают уникальные вещи.Работяги, уникальные люди.Им бы оборудование и хорошие условия-цех.
Well done boys!
Аккумулятор над выхлопной трубой, явный недочёт конструкции. Там нужно экран какой-нибудь установить. А так, работа высший класс 👍🏻
Mashallah, It is amazing what these men can build in such primitive conditions.
These are pretty much the tools and techniques of the 19th and early 20th century. Whilst people celebrate that as the glory days of "manly men doing honest work" during industrialization, people laugh at it when it's done in developing countries. Here you can literally see what life was like for your great-great-granddads - show some respect!
Vehicle with strong backbone 👍
They are absolutely creative but the problem is safety issue ppe
Просто МОЛОДЦЫ!!!
Not for me, not using anything from a backyard in Shitholistan
Great work their building a truck with wooden blocks 🔨 Hammers and a come along and no one pitching about not getting their 30 minute break 😂😂
I had to watch that twice because I thought I was tripping! But yes that was safety gear even boots,hats and goggles wow😮
ну и чё .Чем не диайвайщики .И заметьте -Минимум автоматики ,все на пупу ,медленно но верно.
Keren Bosku Truknya
What is it called? The Deathtrap or The Widow Maker?
y? U didnt build it !
It's called a life saver. It puts food on the table.
Good job my brothers
Ford USA ..said you master make by hands...
Are sandals a requirement on the job site? Watch your toes with all those metal shavings!
It's their culture don't be so brainless....
@@KirshaunW. WTF bro
You just learn to keep your feet out of harms way,
Good job, however i believe that engine is too small for that setup.
perfeito
ورشة لصناعة المقطورات والهياكل يدوية❤ 1:06
So very impressive. Basic tools nothing fancy. This crew is efficient n safe n fast. And a nice finished product. Great job guys. Berry impressive. Please be safe.
Mis SINCERO RESPETO y admiración a estos grandes MAESTROS
Very good job guys
Very relaxing watching these craftsmen at work.
Good
Keep on Trucking 🚚🚛🚙🛻
That box frame looks quite alright, actually. Not bad at all. 👍
You guys really do earn your wages,
Great video, Thanks for sharing!
Steve from London.
But does if have AC and cruise control?
Love the embellishments on the axle support, a heart.
They are good workers, I really like this. A favorite from Vietnam
Los.amiro.travajo.duro.nis.respetos.
Muy.profesionales..costa.rica.los.
Saluda
пакистанский ремонт-дорога ярости
Very nice work brothers top of the top
Esses caras são uns gênio
интересно сколько такая рама ходит до следующей замены?
Самое интересное,ни номера ни чего,и ездят
@@vippersona8925 не, они окошко в новой раме делают и там видно номер старой рамы которая вварена в новую, просто на этом видео не видно.... ну и да, похоже техосмотра у них нет...
a most remarkable way of going about it
excellent Team work‼️🥂
👊🔥
🪖
These brothers can work 🎉 i need to stay at their workshop for a year then am 👍 good
AMAZING!!!!
Felicitaciones a estos genios
Nice work
Best work yet.
36:02..It's not heavy,blow on it a few more times.That look was priceless.
Gotta love them steel toe sandals
WOW ... Just look at the front/rear springs on that unit...
오늘도 파키로운 평화스탄~ 큰형님 출동
Meus Parabéns e uma equipe muito boa espetacular o trabalho de vcs muito inteligentes e profissionais
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 HO BOY WE IN DEEP CRAP IF YOU THINK THAT'S GOOD . I GUESS YOUR AT THE SAME LEVEL AS THEM . GOD HELP US ALL . LET ME KNOW WHEN YOUR ON THE ROAD SO I CAN STAY AT HOME AND BE SAFE 🤣🤣🤣🤣🤣🤣🤣
El producto terminado .
Totalmente INADECUADO.
That's too much angle on the driveshaft - the u-joints won't live long.
Djalli, djalli!
Buddy using a seatbelt in place of a lifting sling. That's a new one.
Let's build a super truck.... and put bald tires on it!
No more flexibility in this chassis, it’s all welded up
good
Thanks 😊
Very good. Whats the purpose of the lorry what body is it going to have?
WELL IT'S ONLEY GOT TO HANDLE A 2 TON LOAD SO ALL 8S GOOD 🤣🤣🤣🤣🤣
Merhaba hocam size ve eşinize şimdiden geçmiş olsun hasta babanızı oraya getirseniz sizin için bir sıkıntı olmazdı tabi düşünsenize saygımvar saygılar
They need a mag-drill, and some roller conveyors by the press
Ain't gonna neither drive nor brake in a straight line 😮
remove regulations and anything is possible with a strong back and mind
di pakistan apapun bisa di perbaiki,,❤❤😊
👍👍👍👍👍👍👍👍👍
Technology from the 18th century xD
porrque teniendo todo , no hacen un techo simple para al menos no los agarre la lluvia, el sol fuerte
Mira alrededor , esta seco no llueve mucho,
Ademas hay que intalar luces por que se oscurese bajo el techo...
And that chassis looks like it can carry a very heavy load but that engine looks like its under powered for purpose. Maybe theres no hills 😅
was that guy mad at the windshield? he kept slapping it like a redheaded stepson.
Mantap
29:51 Vocês não tem corte plasma?
Abraço!!
Damn no shoes even?
20:11 I don't like those shackle mount bolts ...
Use work boots. For your feet sir
ngatos2 mbah, kecetit...
They will have to paint it up in fruity colors
We in the West have all the damn regulations in the world so you in the far East don’t have to have any, right?
According to the DoT rules in the US, you’ve got enough steel sitting on three axles in that thing to max out the weight on every axle with the truck empty. 12K lbs on the steer + 34K lbs on the tandem for a GVW of 36K lbs. I think that your truck will weigh 36K lbs empty once you put the body on it, right?
the sandals ninjas 🥷
THAT SHOULD AT LEAST HANDLE A 100 TON . 🤣🤣🤣🤣🤣🤣 BEFOR IT BRAKES . BUT OF COURSE IT WILL HAVE TO TAKE 200 TONS
Усиление рамы 💪а не 20 Т. До 60 Т🦾
👍👍👍🇷🇺
No sandles
何かのバチが当たりましたね?😂
Material ke alawa total kharcha kitna aya.
Amusingly all their trucks are from junkyards.....
give your boss 95% of your wage back and try live on 5% and you will gain an appreciation of these guy's lives.
They are taking interns from western and Europe kindly apply
all engineering desin by hands....after work, go to Lunch by hands ?
No sir, they eat with their feets
@@viniciuskuetiki1710 I SHALL HAVE TO REMEMBER THAT ONE. 😂😂😂😂😂😂😂😂😂😂
Wehr is this pakistan???
You guys are the best ! talk about health n safety !