G3 Glue Renew Instructional Video for Ski & Splitboard Climbing Skins

G3 Glue Renew is an easy way to recondition G3 climbing skin adhesive with G3's updated formula. Morgan walks us through the application process in this instructional video so that you can extend the life of your ski or splitboard climbing skins.
Full written instructions can be found here: www.dropbox.com/scl/fi/1svivv...
Glue Renew can be purchased here: genuineguidegear.com/products...

[@runesvegre7114]

Nice video, good instructions, but I was unsuccessful. Let me first mention that my skins are not G3, but BD. Maybe the fabric difference is if some importance..?
Removal of the old glue went really well. And putting on the renewal sheet also. But I wonder about the iron temperature..? The accompanying leaflet says 100°C, another video says 120°C, and this video says 160°C, which I used (Toko iron). After cooling to room temperature, the paper was next to impossible to remove from the glue. The glue sticked better to the paper than the skin fabric. A total mess 😔.

[@ErictheRedBaron]

I had this exact same problem. Also applying to Black Diamond skins.